Price List - Splits Mounting Accessories - Salvador Escoda SA
Price List - Splits Mounting Accessories - Salvador Escoda SA
Price List - Splits Mounting Accessories - Salvador Escoda SA
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SA</strong>LVADOR ESCODA S.A. ®<br />
www.salvadorescoda.com<br />
Provença, 392 1st and 2nd floor<br />
Phone +34 93 446 27 80<br />
Fax +34 93 456 90 32<br />
08025 BARCELONA (SPAIN)<br />
CHECK POSSIBLE UPDATING<br />
MA ELECTRIC SPLIT ELEVATOR<br />
Characteristics:<br />
• Elevation up to 138 Kg.<br />
• Elevator weight: 27 Kg<br />
• Maximum elevation: 10 m<br />
• Steel wire meters: 11 m<br />
PRICE LIST<br />
Part No. Item €<br />
MA 14 125 Split elevator Serie C-250 350.00<br />
Dismantable elevator to mount on the condenser units support through a low power drill. It<br />
can elevate a condenser and a sole man can mount heavy equipments<br />
The condenser unit has to be sourrounded by the steeled wire Hang it in the hok and<br />
elevate it with the drill power up to the squares.<br />
Step 1: Place the supports on the wall<br />
Step 2: Set the inverted squares on the wall<br />
supports and turn the handles to adjust them<br />
on the upper part.<br />
Step 3: Place the crosspiece with the reducer on<br />
the squares and slide the steleed cable to tie the<br />
machne up.<br />
Step 4: Throw the steel wire down from the<br />
crosspiece, pass it under the machine and hang<br />
it on the wire. Lift the machine some centimeters<br />
to balance it before raising it up.<br />
Step 5: This is the proper way of passing the<br />
machine between the crosspieces.<br />
Step 6: Place the machine on the wall squares<br />
and screw it, Now you can dismatle the elevator.<br />
108 SPLITS MOUNTING ACCESSORIES