Price List - Splits Mounting Accessories - Salvador Escoda SA

SALVADOR ESCODA S.A. ®
www.salvadorescoda.com
Provença, 392 1st and 2nd floor
Phone +34 93 446 27 80
Fax +34 93 456 90 32
08025 BARCELONA (SPAIN)
CHECK POSSIBLE UPDATING
20 WALL HEATER
MUR Series
• Infrared remote control
• Digital temperature signal
• Power supply 220V 50Hz
• 2 heating modes of 1000 and 2000W
• Set temperature from 18 to 30°C
• Auto-swing function
• Dimensions 653 x 225 x 117 mm
• Extremely silent tangential fan
• Turn-off timer from 0.5 to 7.5 hours
ON/OFF
BUTTON
SHEDULE
PROGRAMMING
BUTTON
Perfect for
small rooms:
• Bathrooms
• Kitchens
• Offices
•Etc
LCD
SCREEN
REMOTE
CONTROL
SENSOR
DIRECTIONS FOR USE:
PRICE LIST
1.- The heater has two powers.
2.- First of all, press the ON/OFF button to switch the heater on.
Secondly, press the HEATING button and the appliance will switch on. At
the same time, the "Sun" icon will enlighten on panel, what it means that
power of the heater is 1000W. Now press the HEATING button again and
the "Sun" icon will be enlightened with more intensity, what will mean the
heater is working at 2000W. You will notice the air from the heater flowing
with more intensity.
Press the SWING button, the "Swing" icon on panel will enlighten and
blades will begin to swing in an automatic way.
Press the ON/OFF button to switch off the heater. If the heater is hot, the
switching off will be delayed 30 seconds to eliminate the remaining heat
and let blades close automatically. To switch the heater back on, please follow
the same stages previously detailed.
3.- Press the TIMER button to settle the time in the programmer (till 7.5 h in 30
minutes inthervals).
168 SPLITS MOUNTING ACCESSORIES