Manual - medicap

More documents

Recommendations

Info

2 Operation 2.1 General Turn the shuttle knob: to select different menu options, can be turned in both directions Press the shuttle knob: to select different menu options back: This always leads back to the previous menu from here without making any changes The main menu Operating manual P1100SD Rev. D 2012-01 5
2.2 Preparation Plug in the power supply unit before starting up the Précise 1100 SD. Connect one end of the hose to the oxygen concentrator output and the other to the connector on the Précise 1100 SD. The 0 2 measurement input and the pressure connectors 1 and/or 2 are marked on the rating plate (see example with sensor 1 and 2 in Fig. 2). 0 2-measurement input sensor 2 sensor 1 Fig. 1: Device from the rear Fig. 2: Précise 1100 SD from below The pressure sensors can be selected from the following options: Sensor 1: Pressure range from -350mbar to +350mbar Sensor 2: Pressure range from 0 to 2.5 bar Sensor 3: Pressure range from 0 to 25 mbar Sensor 4: Pressure range from 0 to 100 mbar power supply unit Operating manual P1100SD Rev. D 2012-01 6 2,5
Page 1: Product description and Operating m
Page 4 and 5: 1 Introduction 1.1 Intended use The
Page 8 and 9: 2.3 Switching on the unit printer s
Page 10 and 11: The gas temperature: Oxygen plotte
Page 12 and 13: Confirm the "Start recording" bar t
Page 14 and 15: Select the desired flow (reference
Page 16 and 17: Once the actual flow is equivalent
Page 18 and 19: The date and time can be reset. 2.8
Page 20 and 21: Printing the graphical displays Sel
Page 22 and 23: 2.10 Switching off the equipment S
Page 24: 6 Scope of delivery 1 x Précise 11

Manual - medicap

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?