WHITE SUPERLOCK OWNERS WORKBOOK 2000 ATS - Singer

Open front covers.
THREADING UPPER LOOPER
Bring the upper looper to its lowest position by turning the handwheel toward you
Draw thread from spool and pass it through the thread stand (back to front), under
thread clip guide (1) and then, in order, through guides 2-4 as illustrated below and
inside the front cover of your Superlock.
With the presser foot raised to release tension, lay thread between
thread tension discs. (2) Be sure thread is all the way into the tension discs.
Snap thread into guide A, B, and C (illustration 3), then thread the hole of the upper
looper (4) using the tweezers provided if necessary.
Bring thread tail under foot and toward back left corner of your Superlock.
14