computer

Splitters
DISEqC switch 2/1 with weather protection housing
2x F socket -> F socket
- Frequency range: 950 – 2500 MHz
- Supports DISEqC 1.0 – 2.0
- Suitable for tone burst (22 kHz)
- For switching the LNB when receiving two satellites in
single or multi-switch equipment
- Note: receiver must be DISEqC or tone burst suitable
DISEqC switch 4/1 with weather protection housing
4x F socket -> F socket
- Frequency range: 950 – 2500 MHz
- Supports DISEqC 1.0 – 2.0
- Suitable for tone burst (22 kHz)
- For switching up to 4 LNBs when receiving at least 4
satellites in single or multi-switch equipment
- Note: receiver must be DISEqC or tone burst suitable
SAT Input adaptor
2x F socket -> F socket
- For the connection of SAT and terrestrial aerial signals
using a single cable
- Frequency range: 5 – 862 / 950 – 2400 MHz
SAT/universal 2-way aerial splitter
F socket > 5 – 2400 MHz > 2x F socket
- For splitting aerial signals
- Full shielded
- With return path
- DC power pass on trunk
- Impedance: 75 Ohm
- Attenuation: < 7 dB
SAT/universal 4-way aerial splitter
F socket > 5 – 2400 MHz > 4x F socket
- For splitting aerial signals
- Full shielded
- With return path
- DC power pass on trunk
- Impedance: 75 Ohm
- Attenuation: < 12,5 dB
SAT wideband amplifier, 16 – 20 dB
F socket > F socket
- Compensation for signal losses
- Full shielded
- Frequency: 47 – 2300 MHz
- Amplification: 16 – 20 dB
- Output level: 110 dBμV
- Power supply via SAT receiver
STS DSW2-N
EDP-No. 44150
ctn qty. 5 / 1 piece
STS DSW4-N
EDP-No. 44151
ctn qty. 5 / 1 piece
STS EW-N
EDP-No. 44152
ctn qty. 5 / 1 piece
STS BV2-NJ, 1 -> 2
EDP-No. 44185
ctn qty. 5 / 1 piece
STS BV4-NJ, 1 -> 4
EDP-No. 44186
ctn qty. 5 / 1 piece
STS BLV-NJ
EDP-No. 44158
ctn qty. 5 / 1 piece
www.vivanco.com
SAT
75