AT Command Manual For ZTE Corporation's ME3000_V2 Module
AT Command Manual For ZTE Corporation's ME3000_V2 Module
AT Command Manual For ZTE Corporation's ME3000_V2 Module
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Parameter <br />
0 Only ERROR<br />
1 Provide error’s specific number<br />
2 Provide error’s specific number and detailed prompt<br />
2.4.4 +ZPWROFF: power off<br />
Description This command is used to power off the module.<br />
<strong>For</strong>mat <strong>AT</strong>+ZPWROFF<br />
Example <strong>AT</strong>+ZPWROFF<br />
OK<br />
Power off the module<br />
2.4.5 +CPIN: input PIN<br />
GSM <strong>Module</strong><br />
Description This command is used to check PIN status and input PIN. The functions<br />
can be used only after the correct PIN is entered.<br />
<strong>For</strong>mat <strong>AT</strong>+CPIN=<br />
Example <strong>AT</strong>+CPIN?<br />
check PIN status<br />
+CPIN:READY<br />
No need to input new PIN<br />
OK<br />
<strong>AT</strong>+CPIN?<br />
check PIN status<br />
+CPIN:SIM PIN<br />
Need input PIN<br />
<strong>AT</strong>+CPIN="****"<br />
Enter correct PIN<br />
OK<br />
Parameter <strong>AT</strong>+CPIN?: check if what passwords need to be entered.<br />
+CPIN: READY: don’t need to enter any password.<br />
+CPIN: SIM PIN: need enter PIN.<br />
+CPIN: SIM PUK:PIN unlock password<br />
+CPIN: PH-SIM PIN: SIM card bundle password<br />
+CPIN: SIM PIN2: PIN2 password<br />
+CPIN: SIM PUK2: PIN2 unlock password<br />
+CPIN: PH-NET PIN: network password<br />
Pin: string value.<br />
2.4.6 +CSQ: check signal strength<br />
Description This command is used to check received signal strength indicator(rssi)<br />
and bit error rate (ber)<br />
<strong>For</strong>mat <strong>AT</strong>+CSQ<br />
Example <strong>AT</strong>+CSQ<br />
+CSQ:,<br />
29