AT Command Manual For ZTE Corporation's ME3000_V2 Module

Parameters :control the method of notifying TE, default 2
0: cache the notice firstly and send it according to value;
1: notify TE as the data cable is idle, otherwise, do not notify TE;
GSM Module
2: Directly notify TE as the data cable is idle, otherwise cache the notice
first and transmit it again as the date cable is idle;
3: Directly notify TE. As the data cable is used, transmit a combined
message to TE.
:set message storage and notify TE, default 1.
0:received message saved to default memory (including class 3), do
not notify TE;
1: received message saved to default memory and notify TE (including
class 3). The notice form is: +CMTI:”SM”,
2: Save Class 2 message to SIM card and notify TE; as for other class,
directly forward message to TE:
+CMT:[],(PDU mode)
Or +CMT:,[,][,,,,,
,,](text mode)
3:as for other class 3, directly forward message to TE: same as =2;
as for other class, the same as =1.
: set cell broadcast
0: don’t send cell broadcast
2: new cell broadcast, return
+CBM: length;;CR;;LF;;pdu;
3: cell broadcast in Class3 format, use bm=2 format
: status report
0: do not send status report
1: new status report, return:
+CDS:;length;;CR;;LF;;pdu;
2: If new status report is saved to ME, return:
+CDSI:;mem;,;index;
:
1: always 1
33