AT Command Manual For ZTE Corporation's ME3000_V2 Module
AT Command Manual For ZTE Corporation's ME3000_V2 Module
AT Command Manual For ZTE Corporation's ME3000_V2 Module
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Target Readers<br />
Preface<br />
This manual is mainly applicable for the following engineers:<br />
System designing engineers<br />
Hardware engineers<br />
Software engineers<br />
Test engineers<br />
Update History<br />
V1.0<br />
Realize <strong>ME3000</strong>_<strong>V2</strong> module’s self-defined <strong>AT</strong> commands;<br />
V1.2<br />
Add the function of network LED, complete and verify the server’s function;<br />
V1.3<br />
Modify the commands of ZPPPCLOSE, ZIPSEND, IFC, IPR, ZDNSGETIP, etc.<br />
Adjust the description of CNMI command;<br />
Add the description of CLCC and CSCS command;<br />
Complete the description of ZIPSETUP(U) command;<br />
V1.4<br />
Modify the format of ZMICGB command;<br />
Delete VTD command;<br />
Support <strong>AT</strong>D>”ZTK01234568#&$” and the call of special symbol;<br />
Add pas=1(not ready, unable to receive <strong>AT</strong> commands) in CPAS;<br />
Modify the timeout for TCP return succeeded from 20s to 75s;<br />
Prompt of inputting PUK after entering wrong PIN for three times<br />
Do not display the characters transmitted excessively through <strong>AT</strong>+ZIPSEND command;<br />
V1.5<br />
1. Add new commands: ZBCCH, ZOPT, ZCALIST & ZBAND<br />
2. Support baud rate 19200 in IPR command;<br />
3. Add the command of ztcptimeout and ziptimeout;<br />
4. Add the function of supporting 3G card;<br />
5. Modify the server’s function and support 2 users connected;<br />
3<br />
GSM <strong>Module</strong>
Change language