AT Command Manual For ZTE Corporation's ME3000_V2 Module
AT Command Manual For ZTE Corporation's ME3000_V2 Module
AT Command Manual For ZTE Corporation's ME3000_V2 Module
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.8 GPRS <strong>Command</strong><br />
2.8.1 +CGDCONT: set PDP format<br />
Description This command is used to set GPRS PDP format;<br />
<strong>For</strong>mat <strong>AT</strong> + CGDCONT=cid, type, APN[,PDP_ADDR]<br />
Example At + CGDCONT=1, "IP","CMNET"<br />
<strong>AT</strong>D*99#<br />
……<br />
Connect<br />
Parameters cid: used to mark the number of PDP, minimum 1;<br />
type: type pf PDP package;<br />
IP: use TCP/IP package;<br />
APN: access point network<br />
PDP_ADDR: user designated IP address (optional)<br />
2.8.2 +CGACT: activate/deactivate PDP<br />
Description This command is used to activate/deactivate PDP settings.<br />
<strong>For</strong>mat <strong>AT</strong>+CGACT= [ [, [, [,..]]]]<br />
Example At + CGDCONT=1,"IP","CMNET"<br />
OK<br />
<strong>AT</strong>+CGACT=1,1<br />
OK<br />
Parameters cid: used to mark PDP parameter;<br />
state: used to indicate PDP status;<br />
0:deactivate;<br />
1:activate;<br />
2.8.3 +CG<strong>AT</strong>T: set GPRS service<br />
Description This command is used to set GPRS service.<br />
<strong>For</strong>mat <strong>AT</strong>+CG<strong>AT</strong>T=[]<br />
Example <strong>AT</strong>+CG<strong>AT</strong>T?<br />
+CG<strong>AT</strong>T:0<br />
OK<br />
Check GPRS service status<br />
<strong>AT</strong>+CG<strong>AT</strong>T=1<br />
OK<br />
Set GPRS service status<br />
Parameter state:<br />
0:detach<br />
1:attach<br />
47<br />
GSM <strong>Module</strong>
Change language