Recessed Architectural Floodlighting - THORN Lighting

14
Mica Slim
Technical Data
LED
(Pre-fixed PCB)
Monochromatic versions:
Mica Slim SS: 1x1.2W
Mica Slim S: 3x1.2W
Mica Slim A: 4x2W
Mica Slim I: 7x2W
RGB versions
For guidance:
Mica Slim I: 4x3x1.2W with
multichip RGB
For Illumination:
Mica Slim I: 7x2W (RRGGGBB)
Lamps
Mica Slim A:
20W/35W HIT-TC-CE (MT)
Metal halide, cap: PGJ5
Mica Slim I:
35W HIT (MT)
Metal halide, cap: G12
Materials/Finish
Body: LM6 marine grade die-cast
aluminium with powder coated
for high corrosion resistance.
Frame: 316 Stainless steel (3mm
thick).
Retaining screws: stainless steel
Front glass: toughened
semi-frosted or frosted sodic
glass.
Glass thicknesses:
Mica Slim A and I: 19mm. Mica
Slim SS and S: 15mm.
Gasket: anti-ageing silicon.
Recessing box: polypropylene.
Cable:
H07RN-F 0.5m long
All versions have integral power
supply.
All versions have electronic
ballast.
Installation/Mounting
Luminiares delivered complete
with body, recess box, frame and
glass. All versions are pre-wired,
with a 0.5m cable.
For outdoor applications, 30cm
drainage gravel or any equivalent
drainage system must be used
beneath the housing to ensure
water can evacuate. The recessed
box can be embedded in asphalt
with good drainage once the
temperature of the asphalt is
approximately 80°C.
Luminaire must be operated for
45 minutes without its front glass
to avoid moisture build-up inside
the housing.
Can be installed in areas with a
maximum low speed of
30km/hr.
To facilitate quick installation, the
wiring can be done via to IP67
wiring connectors (SAP codes
96257910 or 96257911). For
through wiring, IP67 connection
boxes can be used (SAP codes
96257907, 96257908 or
96257909).
All versions have integral power
supply.
The maximum static load is
5000kg.
Colour change RGB lighting
technology available in
Mica Slim I for guidance or
illumination. For RGB versions,
LEDs are driven by DMX control
(not supplied).
Standards
Design and manufactured to
comply with AS/NZS 60598.
Class I Electrical.
IK 10.
IP67.