T.R.A.P. Breather NEW! - Donaldson Company, Inc.
T.R.A.P. Breather NEW! - Donaldson Company, Inc.
T.R.A.P. Breather NEW! - Donaldson Company, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ASpeed T.R.A.P. Set <br />
ASpeed T.R.A.P. Set <br />
For Water And Dirt<br />
New Fast-Acting <strong>Breather</strong> Eliminates Moisture From Hydraulic Reservoirs<br />
Capture better performance today with<br />
our new Thermally Reactive Advanced<br />
Protection (T.R.A.P) <strong>Breather</strong>.<br />
Call <strong>Donaldson</strong> at 800-846-1846.<br />
Now available with<br />
bayonet connection<br />
T.R.A.P. <strong>Breather</strong> Technology<br />
from <strong>Donaldson</strong><br />
• Reacts faster–Senses and<br />
begins removing moisture at low<br />
15% RELATIVE HUMIDITY. This<br />
better accommodates the short<br />
cycles of hydraulic circuits.<br />
• Lasts longer–Exhales moisture<br />
with every flow cycle, regenerating<br />
its water-holding capacity.<br />
• Signals change out–Indicates<br />
need for change out with flashing<br />
red light.<br />
• Installs easily–Lightweight;<br />
simply hand tighten.<br />
• Adapts–Suits both mobile and<br />
industrial applications, now<br />
available with NPT or bayonet<br />
connections.<br />
<strong>Donaldson</strong> <strong>Company</strong>, <strong>Inc</strong>.<br />
Industrial Hydraulics<br />
Tel 800.846.1846<br />
Hydraulicfilters@mail.donaldson.com<br />
www.donaldson.com<br />
Brochure No. HYD-206
How condensation occurs<br />
in HYDRAULIC RESERVOIRS<br />
1 COLD START<br />
3 SHUTDOWN<br />
• Temperature and<br />
RELATIVE HUMIDITY<br />
are equal inside and<br />
outside reservoir<br />
T.R.A.P. =<br />
No Moisture Ingression<br />
➡ No Condensation<br />
Comparing T.R.A.P. TM with Desiccant <strong>Breather</strong>s<br />
FEATURE T.R.A.P. DESICCANT BREATHERS<br />
Patented Technology<br />
Service Life Extended Life Requires Changing<br />
High Humidity<br />
Ambient Air<br />
• Hydraulic system oil and air inside reservoir heat up<br />
• Moisture carrying capacity of the air inside reservoir rises<br />
• Moisture condenses on cooler reservoir surfaces<br />
• Air inside reservoir cools to ambient temperature<br />
• Remaining excess moisture condenses causing oil<br />
degradation, machine wear and eventual failure<br />
Oil Mist Low Sensitivity<br />
Unaffected Severely Reduces Life<br />
U.S. Patent 5,575,832<br />
2 OPERATION<br />
Fouled by Oil Mists,<br />
Reduces Life<br />
Size Small, Lightweight Bulky, Vulnerable
Out-Performs, Out-Lasts Low Restriction to Air Flow<br />
<strong>Donaldson</strong> T.R.A.P. <strong>Breather</strong><br />
Brand X Silica Gel<br />
Brand Y Silica Gel<br />
0 500 1000 1500 2000 2500 3000<br />
Patented T.R.A.P. media regenerates its water-holding<br />
capacity, which leads to longer service life. Competitive<br />
testing revealed that T.R.A.P. breathers continued<br />
performing beyond 3,000 cycles while silica gel breathers<br />
significantly declined in efficiency at less than 2,000<br />
cycles.<br />
P565616 Side View Top View P564669 Side View<br />
Features and Benefits<br />
• Visual Indicator<br />
Indicator is vented at light<br />
Indicator power source:<br />
3V lithium battery CR2032<br />
Actuated by pressure differential,<br />
flashes red to indicate change out is<br />
needed. Indicator setting, 1 PSID.<br />
CFM<br />
GPM<br />
• Rated Airflow<br />
75 CFM Max.<br />
*Apply T.R.A.P. based on fluid exchange rate,<br />
not reservoir size.<br />
• Operating Temperature Range<br />
-40°F to +150°F / -40°C to 66°C<br />
• Highly Efficient<br />
Stops particle sizes down to 3 µm at 97%<br />
Unit is not suitable for use in environments with combustible dusts or fuel vapors.<br />
U.S. Patent 5,575,832
Consistent Quality<br />
Hydraulic Filtration Solutions<br />
<strong>Donaldson</strong> delivers quality hydraulic filters,<br />
replacement elements and reservoir accessories for<br />
industrial and mobile equipment & bulk fuel and<br />
lube applications.<br />
Questions? Call the <strong>Donaldson</strong> Hydraulic Technical<br />
Support Hotline at 800-846-1846 for all your hydraulic<br />
system solutions.<br />
<strong>Donaldson</strong> <strong>Company</strong>, <strong>Inc</strong>.<br />
P.O. Box 1299<br />
Minneapolis, MN 55440 USA<br />
www.donaldson.com<br />
hydraulicfilters@mail.donaldson.com<br />
North America<br />
Tel.: 800-846-1846<br />
Fax: 952-703-4652<br />
Australia<br />
Tel.: 61-2-4352-2022<br />
Fax: 61-2-4351-2036<br />
Asia-Singapore<br />
Tel.: 65-63117373<br />
Fax: 65-63117399<br />
Europe<br />
Tel.: 32-16-38-3811<br />
Fax: 32-16-38-3939<br />
South Africa<br />
Tel.: 27-11-389-8808<br />
Fax: 27-11-908-2216<br />
Latin America & Caribbean<br />
Tel.: 52-555-557-8128<br />
Fax: 52-555-557-8410<br />
www.donaldson.com<br />
©2006 <strong>Donaldson</strong> <strong>Company</strong> Minneapolis, MN U.S.A.