service manual 44240 8.0, 10.0, 12.5 and 15.0 - Westerbeke
service manual 44240 8.0, 10.0, 12.5 and 15.0 - Westerbeke
service manual 44240 8.0, 10.0, 12.5 and 15.0 - Westerbeke
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CRANKSHAFT OIL SEAL INSTALLER<br />
For installing the front oil seal<br />
MD 998305<br />
SPECIAL TOOLS<br />
NOTE: These special tools are available from your local Mitsubishi Automotive Dealer.<br />
CRANKSHAFT REAR OIL SEAL INSTALLER<br />
For installing the rear oil seal. '---.<br />
MD 998011<br />
PUSH ROD AND PIN SET GUIDE<br />
Used to pUll-out <strong>and</strong> press in<br />
the piston pin,<br />
MD 999584<br />
PIN<br />
For supporting the sprocket when<br />
the camshaft sprocket is loosened<br />
or tightened,<br />
MD 998715<br />
END YOKE HOLDER<br />
For supporting the sprocket when<br />
the camshaft sprocket is loosened<br />
or lightened.<br />
MD 990767<br />
VALVE STEM SEAL INSTALLER<br />
MD998760<br />
OIL PAN GASKET CUTTER<br />
For removing the oil pan to<br />
break the oil pan seal.<br />
MD 998727<br />
VALVE SPRING COMPRESSOR<br />
MD 998772<br />
PISTON PIN SET TOOL<br />
For press tiffing piston pins<br />
MD 998780<br />
GUIDE 0<br />
For removing <strong>and</strong> pressing<br />
piston pins<br />
MD 991659<br />
VALVE SPRING COMPRESSOR<br />
For removing <strong>and</strong> installing the<br />
valve springs.<br />
,,!D 998735<br />
Engines & Generators<br />
68
Change language