standoffs - Amatom

Recommendations

Info

Special Alert Handles Finishing Note COLORS EPOXY ADVANTAGES • Hardness • Corrosion Resistant • Resists Humidity and Salt Spray • Color Retention • Oxidation Protection • Resists Melting Under High Temperatures • Color Match to Cabinets or Panels • Electrostatically Applied TYPICAL SPECIFICATIONS AND PROPERTIES Handle material Application of epoxy Cross hatch adhesion ASTM D2571 Flexibility 1/4" mandrel Pencil Hardness Impact, direct and indirect ASTM G14 Taber abrasion Values range Humidity (100% at 95° to 100°F) ASTM D2247 Salt spray (5% solution at 95° to 100°F) ASTMB117 Aluminum, brass, steel or stainless steel Electrostatically applied 100% pass 180°F 2H-4H 100 in. lbs. Lost 1000/cycles 36 to 95 mg 500 hours-no change 1000 hours-less than 1.0 mm undercutting from scribe 2000 hours (unscribed)-no effect The performance characteristics of this chart vary according to application, operating conditions and materials applied. <strong>Amatom</strong> believes this information to be accurate, but since test methods can vary, their validity cannot be verified. This chart is compiled for information purposes only. BLACK - RED - BLUE - GREEN YELLOW - BROWN - CREAM - GREY WHITE – Plus Many More* Gloss • Semi-Gloss • Satin • Matte *Other colors availabe on request. Contact <strong>Amatom</strong> Sales Office For Your Updated Powder Coat Chart 5 Pasco Hill Road • Cromwell, CT 06416-1093 Phone: 860-828-0847 • Call Toll Free: 800-243-6032 • Fax: 860-828-0381 Web Address: http://www.amatom.com • E-Mail: sales@amatom.com 103 HANDLES
HANDLES 104 HANDLES 1/8" ROUND HANDLES INTERNAL THREADS PART L H NO. ± 1/64 ± 1/32 10010 3/4 10011 13/16 10012 7/8 10013 1" 1/2 10014 1-1/4 10015 1-1/2 10016 2" 10020 3/4 10021 13/16 10022 7/8 10023 1" 3/4 10024 1-1/4 10025 1-1/2 10026 2" 10030 1" 10031 1-1/4 10032 1-1/2 1" 10033 1-3/4 10034 2" PART L H NO. ± 1/64 ± 1/32 10038 1" 10039 1-1/4 10040 1-1/2 1-1/4 10041 1-3/4 10042 2" 10045 1" 10046 1-1/4 10047 1-1/2 1-1/2 10048 1-3/4 10049 2" 10052 1-1/4 10053 1-1/2 10054 1-3/4 2" 10055 2" 10056 2-1/2 10057 3" Refer to page 102 for Finish Codes. PART NUMBER ORDERING SYSTEM XXXXX - X - XXXX - XX PART NO. THREAD CODE & DEPTH THREAD CODE A 2-56 0256 3/16 MATERIAL CODE Aluminum A Brass B Stainless Steel SS Steel S NOTE: Metric size dimensions and threads available. Please contact Sales Office. 5 Pasco Hill Road • Cromwell, CT 06416-1093 Phone: 860-828-0847 • Call Toll Free: 800-243-6032 • Fax: 860-828-0381 Web Address: http://www.amatom.com • E-Mail: sales@amatom.com THREAD MATERIAL FINISH
Page 1 and 2:
Handles Fixed and folding, with a l
Page 3 and 4:
A. Post Type Standoffs (Internal Th
Page 5 and 6:
4 Part Number Code & Specifications
Page 7 and 8:
6 Special Alert Externally threaded
Page 9 and 10:
ALUM (A) Notes 8 0 No Finish A 1A A
Page 11 and 12:
STANDOFFS 10 PART NUMBER ORDERING S
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
STANDOFFS 18 BREAK EDGES C’SK I.D
Page 21 and 22:
SPACERS 20 SPACERS SWAGE TYPE HEXAG
Page 23 and 24:
SWAGE STANDOFFS 22 SWAGE STANDOFFS
Page 25 and 26:
SWAGE STANDOFFS .113 24 SWAGE STAND
Page 27 and 28:
SWAGE STANDOFFS 26 SWAGE STANDOFFS
Page 29 and 30:
SWAGE STANDOFFS 28 .201 A Part No.
Page 31 and 32:
SWAGE STANDOFFS 30 .201 A Part No.
Page 33 and 34:
MALE-FEMALE STANDOFFS Refer to page
Page 35 and 36:
MALE-FEMALE STANDOFFS Refer to page
Page 37 and 38:
HINGED STANDOFFS 36 3/16 O.D. Femal
Page 39 and 40:
HINGED STANDOFFS 38 PART NUMBER ORD
Page 41 and 42:
ANTI-ROTAION STANDOFFS 40 ANTI-ROTA
Page 43 and 44:
METRIC STANDOFFS & SPACERS 42 Metri
Page 45 and 46:
METRIC STANDOFFS & SPACERS CODE MAT
Page 47 and 48:
METRIC STANDOFFS 46 METRIC STANDOFF
Page 49 and 50:
METRIC STANDOFFS 48 PART NUMBER ORD
Page 51 and 52:
METRIC SPACERS 50 METRIC SPACERS SW
Page 53 and 54: METRIC SWAGE STANDOFFS 52 PART NUMB
Page 55 and 56: METRIC MALE-FEMALE STANDOFFS 54 MAL
Page 57 and 58: METRIC MALE-FEMALE STANDOFFS Y=.032
Page 59 and 60: METRIC ANTI-ROTATION STANDOFFS 58 M
Page 61 and 62: METRIC ANTI-ROTATION STANDOFFS 60 M
Page 63 and 64: CAPTIVE PANEL HARDWARE NOTE 1 Any s
Page 65 and 66: CAPTIVE PANEL HARDWARE 64 Index Cap
Page 67 and 68: CAPTIVE PANEL HARDWARE 66 0 No Fini
Page 69 and 70: CAPTIVE PANEL SCREWS 68 CAPTIVE PAN
Page 75 and 76: CAPTIVE PANEL WASHERS 74 PART NUMBE
Page 81 and 82: CAPTIVE PANEL RETAINERS 80 PANEL SC
Page 85 and 86: CAPTIVE PANEL RETAINERS TYPE 2B (Re
Page 87 and 88: CAPTIVE PANEL RETAINERS 86 (INSERT-
Page 93 and 94: CAPTIVE PANEL RETAINERS 92 METHOD O
Page 95 and 96: HANDLES 94 Index Handles This secti
Page 97 and 98: HANDLES 96 Style Diameter or Materi
Page 99 and 100: HANDLES CONTEMPORARY HANDLES 98 Sty
Page 101 and 102: HANDLES PVC COATED GRIP Amatom can
Page 103: HANDLES 102 Part Number Code and Sp
Page 107 and 108: HANDLES 106 HANDLES 3/16" ROUND HAN
Page 111 and 112: HANDLES PART L H NO. ± 1/64 ± 1/3
Page 113 and 114: HANDLES 112 HANDLES 1/2" ROUND HAND
Page 119 and 120: HANDLES 118 HANDLES 7/16" x 9/32" O
Page 121 and 122: HANDLES 120 HANDLES 5/8" x 9/32" OV
Page 123 and 124: HANDLES 122 HANDLES 5/8" x 5/16" HA
Page 125 and 126: HANDLES 124 HANDLES 1/2" x 1/4" REC
Page 127 and 128: HANDLES 126 HANDLES 5/8" x 1/4" REC
Page 135 and 136: HANDLES 134 PART L H NO. ± 1/64 ±
Page 141 and 142: HANDLES PART L H NO. ± 1/64 ± 1/3
Page 149 and 150: HANDLES 148 HANDLES 7/16" x 9/32" O
Page 151 and 152: HANDLES 150 HANDLES 5/8" x 3/8" OVA
Page 155 and 156:
HANDLES 154 HANDLES 1/2" x 3/16" RE
Page 157 and 158:
HANDLES 156 HANDLES 1/4" ROUND HAND
Page 159 and 160:
Page 161 and 162:
HANDLES 160 HANDLES 5/8" x 9/32" OV
Page 163 and 164:
HANDLES 162 HANDLES 5/16" ROUND HAN
Page 165 and 166:
HANDLES 164 HANDLES 17/32" X 9/32"
Page 167 and 168:
HANDLES 166 HANDLES 17/32" X 9/32"
Page 169 and 170:
Page 171 and 172:
FERRULES 170 FERRULES FERRULES 5 Pa
Page 173 and 174:
CONTEMPORARY HANDLES 172 CONTEMPORA
Page 175 and 176:
HIGH-TECH HANDLES 174 HIGH-TECH HAN
Page 177 and 178:
LOCKING HANDLES 176 LOCKING HANDLES
Page 179 and 180:
HANDLES 178 ELECTRONIC HARDWARE HAN
Page 181 and 182:
INSULATING WASHERS 180 Insulating W
Page 183 and 184:
INSULATING WASHERS 182 PLEASE READ
Page 185 and 186:
INSULATING WASHERS 184 INSULATING W
Page 187 and 188:
INSULATING WASHERS 186 FLAT INSULAT
Page 189 and 190:
INSULATING WASHERS 188 Continued fr
Page 191 and 192:
Page 193 and 194:
INSULATING WASHERS Continued from p
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
LIGHT AND MEDIUM DUTY PULL DOWN CAT
Page 241 and 242:
CATCHES (cont.) COMPRESSION SPRING
Page 243 and 244:
SERIES 2000 2010 FINISH PL PLAIN ZN
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
SERIES 2250 2270 2275 FINISH PL PLA
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
SERIES 7000 LIFTING GRIP HEAVY DUTY
Page 265 and 266:
HEAVY DUTY HANDLES SERIES 9000 HEAV
Page 267 and 268:
NAS CROSS REFERENCE CHARTS 268 AMAT
Page 269 and 270:
NAS CROSS REFERENCE CHARTS 270 NAS
Page 271 and 272:
STANDOFF CROSS REFERENCE CHARTS 272
Page 273 and 274:
METRIC CONVERSION TABLE 274 AMATOM
Page 275 and 276:
TERMS & CONDITIONS 276 Realizing th
Page 277:
With Our Past it’s a very bright
show all

standoffs - Amatom

Create successful ePaper yourself

Delete template?

Save as template?