Accessories Catalogue - Medray

Kenex In-Screen High Intensity Spotlight
Model 1407 Shutter Viewers
A premium range with moveable blinds and a high light output
• 4 adjustable blinds ensure glare-free viewing by masking any
bright areas (Blinds are in front of the illuminated screen, to
provide sharply defined edges and behind clear glass to help
keep the interior dust free)
• Film retainers hold large and small films securely
• 5 Fluorescent tubes, controlled by an electronic dimmer, provide
bright and even illumination over the whole viewing surface
• Dimming down to 50% (Flicker-Free Dimming to 20%)
• Flicker-free models are easier on the eyes and less likely to
induce fatigue.
Model 1407 Shutter Viewers
(Dimming)
Stepless dimming down to 50%
Model 1407 Shutter Viewers
(Flicker-Free Dimming)
Flicker-free stepless dimming (down to 20%) is recommended for
long working periods
Films Viewing Area W X H Dimensions W X H X D
1. 35 x 43cm 49 x 44cm 753 x 753 x 110mm
2. 35 x 43cm 80 x 44cm 1059 x 753 x 110mm
3. 35 x 43cm 105 x 44cm 1309 x 753 x 110mm
4. 35 x 43cm 140 x 44cm 1671 x 753 x 110mm
Ortho. film 44 x 115cm 753 x 1391 x 110mm
Phone 01 4663 773 Fax 01 4663 800
In-Screen High Intensity Spotlight
A defined spot factory fitted to any viewer
• An internal 12 v 50w bulb casts a defined spotlight onto the
centre of a 35 x 43cm film area
• Push button activated tungsten halogen bulb is normally in
the right hand screen
• Please specify required film area for the spotlight.
In-Screen High Intensity Floodlight
Provides a bright light over a 35 x 43cm film area
• An internal 275 watt photoflood bulb illuminates practically
the whole of a 35 x 43cm film area
• The push button activated bulb is normally in the right hand
screen
• Please specify required film area for the floodlight.
Kenex Shutter Viewer Model 1407
Kenex 2-Tier Model 1407
55
X-RAY FILM VIEWERS