Douglas in full lengths - Dinesen
Douglas in full lengths - Dinesen
Douglas in full lengths - Dinesen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9. Glue the plugs care<strong>full</strong>y with moisture repellent PVAC adhesive as for example Casco 3337. Make<br />
sure the ve<strong>in</strong>s of the plugs follow the ve<strong>in</strong>s of the planks. Make sure to distribute the adhesive well.<br />
Excess plug is sanded off us<strong>in</strong>g a small belt sander.<br />
10. Alternatively, planks up to 300 mm width can be screwed secretly. Use a 4.2 x 65 mm D<strong>in</strong>esen Floor<br />
screw, which is screwed <strong>in</strong>to the upper-side of the tongue at an angle of 45˚. Also fasten the first and<br />
last plank from above.<br />
Figure 7: Cross section, screwed from above, joists<br />
Figure 8: Cross section, secretly screwed, joists<br />
Page 12 I Fixed tongue<br />
Plug<br />
Floor plank<br />
Joist<br />
Screw<br />
Wedge<br />
Vapour barrier<br />
Concrete<br />
Floor plank<br />
Screw<br />
Joist<br />
Wedge<br />
Vapour barrier<br />
Concrete