Earthwool Acoustic Floor Slab and Earthwool ... - Knauf Insulation

More documents

Recommendations

Info

Regulations In the opinion of the BBA, Earthwool Acoustic Floor Slab and Earthwool Acoustic Floor Slab Plus, if used in accordance with the provisions of this Certificate, will meet or contribute to meeting the relevant requirements of the following Building Regulations: The Building Regulations 2000 (as amended) (England and Wales) Requirement: A1 Loading Comment: The products have adequate strength and stiffness. See section 9.1 of this Certificate. Requirement: C2(c) Resistance to moisture Comment: The products can adequately limit the risk of surface condensation. See sections 7.1 and 7.2 of this Certificate. Requirement: E1 Protection against sound from other parts of the building and adjoining buildings Comment: When installed in suitable floor constructions, the products can contribute to meeting this Requirement. See sections 5.1 to 5.5 of this Certificate. Requirement: L1(a)(i) Conservation of fuel and power Comment: The products can contribute to meeting this Requirement. See sections 6.2 and 6.3 of this Certificate. Requirement: Regulation 7 Materials and workmanship Comment: The products are acceptable material. See section 11 and the Installation part of this Certificate. The Building (Scotland) Regulations 2004 (as amended) Regulation: 8(1) Fitness and durability of materials and workmanship Comment: The use of the products satisfies the requirement of this Regulation. See section 11 and the Installation part of this Certificate. Regulation: 9 Building standards — construction Standard: 1.1(b) Structure Comment: The products have adequate strength and stiffness, with reference to clause 1.1.1 (1) . See section 9.1 of this Certificate. Standard: 3.15 Condensation Comment: The products can adequately limit the risk of surface condensation, , with reference to clauses 3.15.1 (1) ,3.15.4 (1) and 3.15.5 (1) . See sections 7.1 and 7.3 of this Certificate. Standard: 6.1(b) Carbon dioxide emissions Standard: 6.2 Building insulation envelope Comment: The products can contribute to satisfying clauses, or parts of, 6.1.2 (1)(2) , 6.1.3 (1)(2) , 6.1.6 (1) , 6.2.1 (1)(2) , 6.2.3 (1)(2) , 6.2.4 (2) , 6.2.6 (1) , 6.2.7 (1)(2) to 6.2.11 (1)(2) and 6.2.12 (2) of these Standards. See sections 6.2 and 6.3 of this Certificate. Regulation: 12 Building standards — conversions Comment: All comments given for the products under Regulation 9, also apply to this Regulation, with reference to clause 0.12.1 (1) and Schedule 6 (1) . (1) Technical Handbook (Domestic). (2) Technical Handbook (Non-Domestic). The Building Regulations (Northern Ireland) 2000 (as amended) Regulation: B2 Fitness of materials and workmanship Comment: The products are acceptable materials. See section 11 and the Installation part of this Certificate. Regulation: C5 Condensation Comment: The products can adequately limit the risk of surface condensation. See section 7.1 of this Certificate. Regulation: D1 Stability Comment: The products have adequate strength and stiffness. See section 9.1 of this Certificate. Regulation: F2(a)(i) Conservation measures Regulation: F3(2) Target carbon dioxide Emissions Rate Comment: The products can contribute to meeting this Regulation. See sections 6.2 and 6.3 of this Certificate. Regulation: G2(2) Separating walls and separating floors Regulation: G3(2) Existing walls and floors which become separating walls and separating floors Comment: When installed in suitable floor constructions the products can contribute to satisfying these Regulations. See sections 5.1, 5.4 and 5.5 of this Certificate. Construction (Design and Management) Regulations 2007 Construction (Design and Management) Regulations (Northern Ireland) 2007 In the opinion of the BBA, there is no information in this Certificate which relates to the obligations of the client, CDM co-ordinator, designer and contractors under these Regulations. Page 2 of 12
Non-regulatory Information NHBC Standards 2010 NHBC accepts the use of Earthwool Acoustic Floor Slab and Earthwool Acoustic Floor Slab Plus, when installed and used in accordance with this Certificate, in relation to NHBC Standards, Chapters 5.1, Substructure and ground bearing floors, 5.2 Suspended ground floors and 6.4 Timber and concrete upper floors. Technical Specification 1 Description 1.1 Earthwool Acoustic Floor Slab and Earthwool Acoustic Floor Slab Plus are unfaced, plain-edged slabs manufactured from high-density mineral wool (rock) which is resin-bonded with ECOSE (1) Technology binder and is water repellent. (1) ECOSE is a registered trademark of Knauf Insulation Ltd. 1.2 The slabs have the nominal characteristics as shown in Table 1. Table 1 Nominal characteristics Length Width Insulation thickness Declared overall thermal conductivity Minimum compressive strength Nominal density Edge detail Earthwool Acoustic Floor Slab Earthwool Acoustic Floor Slab Plus 900 mm 600 mm 25 mm 0.036 W·m –1 ·K –1 10 KPa 100 kg·m –3 Square Page 3 of 12 900 mm 600 mm 25, 30, 40 and 50 mm 0.036 W·m –1 ·K –1 10 KPa 140 kg·m –3 Square 2 Delivery and site handling 2.1 The slabs are delivered to site in weatherproof Supakube packaging. Each pack carries a label bearing the manufacturer’s name, product description, essential instructions for installation and the BBA identification mark incorporating the number of this Certificate. 2.2 The slabs must be stored under cover until required for use. Assessment and Technical Investigations The following is a summary of the assessment and technical investigations carried out on Earthwool Acoustic Floor Slab and Earthwool Acoustic Floor Slab Plus. Design Considerations 3 General 3.1 Earthwool Acoustic Floor Slab and Earthwool Acoustic Floor Slab Plus are used as a resilient layer for acoustic insulation of intermediate timber-based separating floors and intermediate concrete floors respectively, and are also effective in reducing the thermal transmittance (U value) of new or existing concrete floors, when used as a double layer. 3.2 Earthwool Acoustic Floor Slab is a suitable resilient layer in timber platform floors, Type 3 in new build and Floor Treatment/Type 2 in conversions and Earthwool Acoustic Floor Slab Plus is suitable in FFT4 in E-FC-1 and E-FC-2 Robust Details. 3.3 The slabs must not be used where they may come into contact with moisture from the ground. 3.4 Ground-supported concrete floors incorporating the slabs must include a suitable damp-proof membrane laid in accordance with the relevant clauses of CP 102 : 1973, BS 8102 : 1990 and/or BS 8215 : 1991. 3.5 Suspended concrete ground floors incorporating the boards must include a damp-proof membrane or suitable ventilation of the sub-floor as appropriate. 3.6 The overlay to the slabs should be: a cement-based floor screed, laid in accordance with the relevant clauses of BS 8204-1 : 2003 and/or BS 8204-2 : 2003, and BS 8000-9 : 2003, or wood-based floor, eg tongue-and-groove, flooring grade particle board (Type P5 or P7) to BS EN 312 : 2003 or oriented strand board of type OSB/3 or OSB/4 to BS EN 300 : 2006, 18 mm thick (minimum), installed in accordance with DD CEN/TS 12872:2007, or a concrete slab in accordance with BS 8204-1 : 2003 and BS 8204-2 : 2003.
Page 1: Knauf Insulation Ltd P O Box 10 Sta
Page 5 and 6: Table 4 Typical design U values for
Page 7 and 8: Timber and concrete separating floo
Page 9 and 10: Bibliography BS 1282 : 1999 Wood pr
Page 11 and 12: BLANK PAGE Page 11 of 12

Earthwool Acoustic Floor Slab and Earthwool ... - Knauf Insulation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?