EMV Cable Transit, Modular System - bst-Brandschutztechnik

More documents

Recommendations

Info

B5.EMV.01 01 Multi Cable Transits EMV/EMC EMV Cable Transit, Modular System Why to install edifi cial screening and EMV cable transits? Buildings, parts thereof and rooms where computers or highly sensitive electronic equipment - like transmitters and control systems, communication technology or medical diagnostic devices - are in operation, are shielded from electromagnetic interfering fi elds by electrical conductive foils or metal grids. These magnetic fi elds result either from sudden electromagnetic impulses (EMP), caused by lightnings (LEMP), nuclear explosions (NEMP), switching operations in overhead lines and transformer stations, etc. Or, electronic devices produce magnetic fi elds by themselves which could infl uence other instruments, if not suffi ciently shielded. Especially through the cable shield such impulses are transmitted. Therefore, even the best edifi cial screening has no eff ect if cable transits into the building or cable penetrations within are not properly shielded. Basic frame SB, Quick Fix TCME (Tolerance Cable Module EMV) and Filler Blocks FBE The modular bst system SB/EMV off ers the perfect protection from unwanted electromagnetic impulses at outdoor-to-indoor transits and cable penetrations. Pre-manufactured bst frames of type SB (see also page 4) are concrete-cast into building apertures, bricked-in or mounted on-wall and then they are electrically conductive connected to the building screen. Upon installation of cables they are sealed by Quick Fix TCME („Tolerance Cable Modules EMV“ adaptable to the cable diameter) made from elastic rubber. Wedge K-120/EMV compresses the bst EMV Modular System so that beside the fi re protection also gas- and watertightness are achieved. Modules carry an insert of copper tips, which provides the conductive connection between cable shield and frame. Cores within the modules or also fi ller blocks FBE fi ll the reserve space for later installations. Filler block FBE bst Basic frame SB Quick Fix TCME Modules with adapters and core bst-firestop.com fi reresistant gastight watertight Building screen Wedge K-120/EMV Cable Anchor plate download info: www.bst-fi restop.com/data/datb5emv01e.pdf pdf
Set each consisting of Set each consisting of FBE 120x5/0 1 Solid Filler Block 120x5x60mm FBE 120x10/0 1 Solid Filler Block 120x10x60mm FBE 20/0 1 Solid Filler Block 20x20x60mm FBE 30/0 1 Solid Filler Block 30x30x60mm FBE 40/0 1 Solid Filler Block 40x40x60mm FBE 60/0 1 Solid Filler Block 60x60x60mm pdf QUICK-FIX TOLERANCE CABLE MODULE bst-firestop.com TCME 20/0+5-12 12 Quick-Adapter 20/S Ø5 - 7 (7,5)mm (black) 12 Quick-Adapter 20/L Ø8 (7,5) - 10 (10,5)mm (grey) 2 Quick-Basic 6x20 Ø11 (10,5)-12 (12,5)mm (red) 6 Quick-Core Ø5mm (red) TCME 30/0+13-23 8 Quick-Adapter 30/S Ø13(12,5)-16(16,5)mm (black) 8 Quick-Adapter 30/L Ø17(16,5)-21(21,5)mm (grey) 2 Quick-Basic 4x30 Ø22(21,5)-23(23,5)mm (red) 4 Quick-Core Ø13mm (red) TCME 40/0+23-33 8 Quick-Adapter 40/S Ø23(22,5)-26(26,5)mm (black) 8 Quick-Adapter 40/L Ø27(26,5)-30(30,5)mm (grey) 2 Quick-Basic 4x40 Ø31(30,5)-33(33,5)mm (red) 4 Quick-Core Ø23mm (red) TCME 60/34-51 and TCME 60/0+34-51 TCME 90/52-78 and TCME 90/0+52-78 TCME 120/79-99 and TCME 120/0+79-99 TCME Technology for EMV Cable Transits Quick Fix TCME (Tolerance Cable Modules EMV) made from elastic, highly fi re-resistant and halogen free elastomeric material (bst-HFE) are supplied in sets with adapters and cores to be adapted to the respective cable diameter. Contact tips and sheets made of copper create a conductive connection between cable shield and frame. 2 Quick-Adapter 60/S Ø34(33,5)-38(38,5)mm (black) 2 Quick-Adapter 60/L Ø39(38,5)-43(43,5)mm (grey) 2 Quick-Adapter 60/XL Ø44(43,5)-48(48,5)mm (red) 2 Quick-Basic 60 Ø49(48,5)-51(51,5)mm (red) 1 Quick-Core Ø34mm (red) 2 Quick-Adapter 90/S Ø52(51,5)-57(57,5)mm (black) 2 Quick-Adapter 90/L Ø58(57,5)-63(63,5)mm (grey) 2 Quick-Adapter 90/XL Ø64(63,5)-69(69,5)mm (red) 2 Quick-Adapter 90/XXL Ø70(69,5)-75(75,5)mm (black) 2 Quick-Basic 90 Ø76(75,5)-78(78,5)mm (red) 1 Quick-Core Ø52mm (red) 2 Quick-Adapter 120/S Ø79(78,5)-84(84,5)mm (black) 2 Quick-Adapter 120/L Ø85(84,5)-90(90,5)mm (grey) 2 Quick-Adapter 120/XL Ø91(90,5)-96(96,5)mm (red) 2 Quick-Basic 120 Ø97(96,5)-99(99,5)mm (red) 1 Quick-Core Ø79mm (red) Filler blocks FBE Can be used optionally instead of Quick Fix TCM/EMV with core. FB/EMV have the advantage of a faster assembly and fi ll the reserve space for later cable installations. download info: www.bst-fi restop.com/data/datb5im01e.pdf fi reresistant gastight watertight B5.IM.01 Multi Cable Transits 02 Insertmodules EMV
Page 1: st-firestop.com EMV Cable Transit,
Page 5 and 6: Design Basic frame of type SB for c
Page 7 and 8: Table B5.RR.021, Dimensions in mm p

EMV Cable Transit, Modular System - bst-Brandschutztechnik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?