INTEGRA DRAWER SYSTEM - Grass
INTEGRA DRAWER SYSTEM - Grass
INTEGRA DRAWER SYSTEM - Grass
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
min. 51 min. 19<br />
Fitting dimensions Cutting dimensions for 16 mm chipboard<br />
15.5 +1<br />
-0.5<br />
10<br />
8<br />
10<br />
front edge of cabinet<br />
32 37<br />
9 12<br />
For Ø 3.5<br />
chipboard screws 198<br />
or Euro screws 191/192<br />
33<br />
back panel front<br />
16<br />
35<br />
bottom width = ICW – 31<br />
inside cabinet width (ICW)<br />
14<br />
35 2<br />
9005 / Ø 3.5 x 15 mm<br />
chipboard screws<br />
9006 / pre-drill with<br />
Ø 10 x 12.5 mm<br />
bottom length = Integra nominal length (NL) – 5 mm<br />
Fixing positions for front of cabinet<br />
Drawer<br />
1<br />
Integra sides height 53 mm<br />
including cabinet slides<br />
2<br />
Front fixing<br />
8.5<br />
15.5<br />
7 32 9<br />
bottom<br />
overlay<br />
side overlay<br />
Extension loss<br />
back panel<br />
ICW – 31<br />
bottom<br />
ICW – 31<br />
front<br />
can be<br />
selected<br />
Fixing positions for cabinet slides<br />
35<br />
nominal length – 5<br />
can be<br />
selected<br />
Length Extension loss 1 Extension loss 2<br />
350 88 72<br />
400 101 85<br />
450 101 85<br />
500 101 85<br />
550 101 85<br />
Extension loss 1: is the extension loss when the drawer is not held by stop.<br />
Extension loss 2: is the extension loss when the drawer is held by stop.<br />
96<br />
64<br />
96<br />
64<br />
front edge of cabinet<br />
128 128 96 128 37<br />
350<br />
400<br />
450<br />
500<br />
550<br />
All dimensions in millimetres.<br />
2<br />
7<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes