INTEGRA DRAWER SYSTEM - Grass
INTEGRA DRAWER SYSTEM - Grass
INTEGRA DRAWER SYSTEM - Grass
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>INTEGRA</strong> <strong>DRAWER</strong> <strong>SYSTEM</strong><br />
The single-wall steel drawer system.
Integra<br />
The single-wall steel drawer system.<br />
The Integra system offers top quality and maximum usability.<br />
The Integra single-wall steel drawer system offers furniture makers<br />
a wide range of design options for modern kitchens and bathrooms.<br />
Everything is possible: standard drawers, interior pull-outs, full extension<br />
Innovative solutions for flexible production<br />
• Sophisticated technology, excellent workmanship<br />
• Load capacity higher than industry standard<br />
• Parallel closing action<br />
• Two different methods for fitting fronts<br />
• Top, efficient solutions at a competitive price<br />
• Easy and efficient fitting<br />
• Eccentric cam adjustment<br />
• Excellent assembly technology<br />
drawers with railings, cooker plinth drawers, pull-outs for suspension files<br />
and other combinations. Excellent quality, perfect function and looks. For the<br />
end customer too, Integra offers maximum user benefit.<br />
3<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Product overview.<br />
4<br />
Load capacity<br />
30 kg<br />
System information<br />
Integra Top<br />
• Side height 53 mm<br />
• Single-extension drawer<br />
• Installation width 15.5 mm<br />
• Bottom panel for screw fitting<br />
30 kg Integra Top<br />
• Side height 85 mm<br />
• Single-extension drawer<br />
• Installation width 15.5 mm<br />
• Bottom panel for screw fitting<br />
8<br />
30 kg<br />
30 kg<br />
30 kg<br />
30 kg<br />
30 kg<br />
Integra Top<br />
• Side height 117 mm<br />
• Single-extension drawer<br />
• Installation width 15.5 mm<br />
• Bottom panel for screw fitting<br />
Integra Top<br />
• Side height 149 mm<br />
• Single-extension drawer<br />
• Installation width 15.5 mm<br />
• Bottom panel for screw fitting<br />
Integra Quick<br />
• Side height 85 mm<br />
• Single extension drawer<br />
• Installation width 15.5 mm<br />
• Bottom panel for push-fit<br />
Integra Quick<br />
• Side height 149 mm<br />
• Single-extension drawer<br />
• Installation width 15.5 mm<br />
• Bottom panel for push-fit<br />
Full-extension drawer components<br />
• For side heights 53, 85, 117<br />
and 149 mm<br />
• Installation width 15.5 mm<br />
Page<br />
2<br />
6<br />
10<br />
12<br />
14<br />
16<br />
18
Inset drawers<br />
• Front panel holder for inset drawers<br />
• For side height 85 mm and 149 mm<br />
Screw-on railing<br />
• For Integra drawers<br />
with back panel in wood<br />
Quick-mounting railing<br />
• For Integra drawers<br />
with back panel in wood or steel<br />
Pull-out railing<br />
• Railing for single or double configuration<br />
• To be used with single-extension<br />
drawer 1700<br />
Railing for suspension files<br />
• Oval aluminium tube<br />
• Good stability and load-bearing capacity<br />
Accessories<br />
• Spacer<br />
• Drawer stop<br />
• Screws<br />
Installation technologies<br />
• Assembly press<br />
• Drilling and marker jigs<br />
• Insertion die<br />
Technical information<br />
Page<br />
20<br />
22<br />
24<br />
26<br />
28<br />
30<br />
32<br />
34<br />
5<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra Top<br />
Single-wall steel drawer, height 53 mm, single-extension, 30 kg,<br />
installation width 15.5 mm, bottom panel for screw fixing.<br />
6<br />
1 Integra drawer sides height 53 mm<br />
2 Front fixing<br />
• 2-D front panel adjustment: for easy adjustment of gaps<br />
• Edge clearance: accurate contact between drawer slide and<br />
bottom panel, without chamfering the bottom panel<br />
• Can be converted into full-extension drawer<br />
• Parallel closing action: reliable closing, minimum gap widths<br />
• Double stop: holds the drawer securely in position when open<br />
Accessories Page 30 Technical information Page 34<br />
Installation technology Page 32<br />
Nominal length in mm Item No. white RAL 9010<br />
350 9003.350.2<br />
400 9003.400.2<br />
450 9003.450.2<br />
500 9003.500.2<br />
550 9003.550.2<br />
PU/packaging unit PU 10<br />
PU 10 = 10 sets, loose in carton<br />
Front fixing Item No. left Item No. right Item No. left Item No. right<br />
For screw fixing 9005.L.VE10 9005.R.VE10 9005.L.VE250 9005.R.VE250<br />
With press-fit dowels 9006.L.VE10 9006.R.VE10<br />
PU/packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton
min. 51 min. 19<br />
Fitting dimensions Cutting dimensions for 16 mm chipboard<br />
15.5 +1<br />
-0.5<br />
10<br />
8<br />
10<br />
front edge of cabinet<br />
32 37<br />
9 12<br />
For Ø 3.5<br />
chipboard screws 198<br />
or Euro screws 191/192<br />
33<br />
back panel front<br />
16<br />
35<br />
bottom width = ICW – 31<br />
inside cabinet width (ICW)<br />
14<br />
35 2<br />
9005 / Ø 3.5 x 15 mm<br />
chipboard screws<br />
9006 / pre-drill with<br />
Ø 10 x 12.5 mm<br />
bottom length = Integra nominal length (NL) – 5 mm<br />
Fixing positions for front of cabinet<br />
Drawer<br />
1<br />
Integra sides height 53 mm<br />
including cabinet slides<br />
2<br />
Front fixing<br />
8.5<br />
15.5<br />
7 32 9<br />
bottom<br />
overlay<br />
side overlay<br />
Extension loss<br />
back panel<br />
ICW – 31<br />
bottom<br />
ICW – 31<br />
front<br />
can be<br />
selected<br />
Fixing positions for cabinet slides<br />
35<br />
nominal length – 5<br />
can be<br />
selected<br />
Length Extension loss 1 Extension loss 2<br />
350 88 72<br />
400 101 85<br />
450 101 85<br />
500 101 85<br />
550 101 85<br />
Extension loss 1: is the extension loss when the drawer is not held by stop.<br />
Extension loss 2: is the extension loss when the drawer is held by stop.<br />
96<br />
64<br />
96<br />
64<br />
front edge of cabinet<br />
128 128 96 128 37<br />
350<br />
400<br />
450<br />
500<br />
550<br />
All dimensions in millimetres.<br />
2<br />
7<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra Top<br />
Single-wall steel drawer, height 85 mm, single-extension, 30 kg,<br />
installation width 15.5 mm, bottom panel for screw fixing.<br />
8<br />
1 Integra drawer sides, height 85 mm 2 Cover caps<br />
3 Front fixing<br />
Click-on =<br />
front panel mounting without tools<br />
Slide-on =<br />
front fixing for screw-fixing<br />
• 2-D front panel adjustment: for easy adjustment of gaps<br />
• Edge clearance: accurate contact between drawer slide and<br />
bottom panel, without chamfering the base<br />
• Can be converted into full-extension drawer<br />
• Parallel closing action: reliable closing, minimum gap widths<br />
• Double stop: holds the drawer securely in position when open<br />
Nominal length in mm Item No. white RAL 9010<br />
275 9103.275.2<br />
350 9103.350.2<br />
400 9103.400.2<br />
450 9103.450.2<br />
500 9103.500.2<br />
550 9103.550.2<br />
PU/Packaging unit PU 10<br />
PU 10 = 10 sets, loose in carton<br />
Click-on Item No. left Item No. right Item No. left Item No. right<br />
For screw-fixing 9305.L.VE10 9305.R.VE10 9305.L.VE250 9305.R.VE250<br />
With press-fit dowels 9306.L.VE10 9306.R.VE10 9306.L.VE250 9306.R.VE250<br />
With expanding dowels 9307.L.VE250 9307.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Item No. white RAL 9010<br />
9112.2.VE20<br />
PU 20<br />
9112.2.VE500<br />
PU 500<br />
Slide-On Item No. left Item No. right Item No. left Item No. right<br />
For screw-fixing 9205.L.VE10 9205.R.VE10 9205.L.VE250 9205.R.VE250<br />
With press-fit dowels 9206.L.VE10 9206.R.VE10 9206.L.VE250 9206.R.VE250<br />
With expanding dowels 9207.L.VE250 9207.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Information about compatible<br />
steel back panels on request.<br />
Imprinted cover caps on request.<br />
Front panel fixing for interior pull-out Page 20 Accessories Page 30 Technical information Page 34<br />
Railing Page 22 Installation technology Page 32
min. 19<br />
min. 83<br />
Fitting dimensions Cutting dimensions for 16 mm chipboard<br />
15.5 +1<br />
-0.5<br />
10<br />
8<br />
10<br />
front edge of cabinet<br />
32 37<br />
9 12<br />
For Ø 3.5<br />
chipboard screws 198<br />
or Euro screws 191/192<br />
32<br />
33<br />
back panel front<br />
16<br />
70<br />
bottom width = ICW – 31<br />
inside cabinet width (ICW)<br />
bottom length = Integra nominal length (NL) – 5 mm<br />
Fixing positions for front of cabinet<br />
Drawer<br />
2<br />
Cover caps<br />
14<br />
35 2<br />
1<br />
9x05<br />
Ø 3.5 x 15 mm<br />
chipboard screws<br />
9x06 / 9x07<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
8.5<br />
Integra sides height 85 mm<br />
including cabinet slides<br />
3<br />
Front fixing<br />
15.5<br />
7 64 9<br />
bottom<br />
overlay<br />
side overlay<br />
Extension loss<br />
back panel<br />
ICW – 31<br />
base<br />
ICW – 31<br />
front<br />
can be<br />
selected<br />
Fixing positions for cabinet slides<br />
70<br />
nominal length – 5<br />
can be<br />
selected<br />
Length Extension loss 1 Extension loss 2<br />
275 88 72<br />
350 88 72<br />
400 101 85<br />
450 101 85<br />
500 101 85<br />
550 101 85<br />
Extension loss 1: is the extension loss when the drawer is not held by stop.<br />
Extension loss 2: is the extension loss when the drawer is held by stop.<br />
96<br />
64<br />
96<br />
64<br />
front edge of cabinet<br />
128 128 96 128 37<br />
275<br />
350<br />
400<br />
450<br />
500<br />
550<br />
All dimensions in millimetres.<br />
2<br />
9<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra Top<br />
Single-wall steel drawer, height 117 mm, single-extension, 30 kg,<br />
installation width 15.5 mm, bottom panel for screw fixing.<br />
3 Front fixing<br />
10<br />
1 Integra drawer sides, height 117 mm<br />
Click-on =<br />
front panel mounting without tools<br />
Slide-on =<br />
front fixing for screw fixing<br />
• 2-D front panel adjustment: for easy adjustment of gaps<br />
• Edge clearance: accurate contact between drawer slide and<br />
bottom panel, without chamfering the bottom panel<br />
• Can be converted into full-extension drawer<br />
• Parallel closing action: reliable closing, minimum gap widths<br />
• Double stop: holds the drawer securely in position when open<br />
Nominal length in mm Item No. white RAL 9010<br />
350 9203.350.2<br />
400 9203.400.2<br />
450 9203.450.2<br />
500 9203.500.2<br />
550 9203.550.2<br />
Packaging unit PU 5<br />
PU 5 = 5 sets, loose in carton<br />
2 Cover caps<br />
Item No. white RAL 9010<br />
9112.2.VE20<br />
PU 20<br />
9112.2.VE500<br />
PU 500<br />
Click-on Item No. left Item No. right Item No. left Item No. right<br />
For screw fixing 9305.L.VE10 9305.R.VE10 9305.L.VE250 9305.R.VE250<br />
With press-fit dowels 9306.L.VE10 9306.R.VE10 9306.L.VE250 9306.R.VE250<br />
With expanding dowels 9307.L.VE250 9307.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Slide-on Item No. left Item No. right Item No. left Item No. right<br />
For screw fixing 9205.L.VE10 9205.R.VE10 9205.L.VE250 9205.R.VE250<br />
With press-fit dowels 9206.L.VE10 9206.R.VE10 9206.L.VE250 9206.R.VE250<br />
With expanding dowels 9207.L.VE250 9207.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Imprinted cover caps on request.<br />
Front panel fixing for interior pull-out Page 20 Accessories Page 30 Technical information Page 34<br />
Railing Page 22 Installation technology Page 32
min. 19<br />
min. 116<br />
Fitting dimensions Cutting dimensions for 16 mm chipboard<br />
15.5 +1<br />
-0.5<br />
10<br />
10<br />
32<br />
32<br />
33<br />
front edge of cabinet<br />
32 37<br />
9 12<br />
For Ø 3.5<br />
chipboard screws 198<br />
or Euro screws 191/192<br />
back panel front<br />
16<br />
99<br />
8<br />
bottom width = ICW– 31<br />
8.5<br />
inside cabinet width (ICW)<br />
bottom length = Integra nominal length (NL) – 5 mm<br />
Fixing positions for front of cabinet<br />
Drawer<br />
2<br />
Cover caps<br />
14<br />
35 2<br />
1<br />
9x05<br />
Ø 3.5 x 15 mm<br />
chipboard screws<br />
9x06 / 9x07<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
15.5<br />
Integra sides height 117 mm<br />
including cabinet slides<br />
3<br />
Front fixing<br />
39 64 9<br />
bottom<br />
overlay<br />
side overlay<br />
Extension loss<br />
back panel<br />
ICW – 31<br />
bottom<br />
ICW – 31<br />
front<br />
can be<br />
selected<br />
Fixing positions for carcass slides<br />
96<br />
64<br />
99<br />
nominal length – 5<br />
can be<br />
selected<br />
Length Extension loss 1 Extension loss 2<br />
350 105 89<br />
400 118 102<br />
450 118 102<br />
500 118 102<br />
550 118 102<br />
Extension loss 1: is the extension loss when the drawer is not held by stop.<br />
Extension loss 2: is the extension loss when the drawer is held by stop.<br />
96<br />
64<br />
front edge of cabinet<br />
128 128 96 128 37<br />
350<br />
400<br />
450<br />
500<br />
550<br />
All dimensions in millimetres.<br />
2<br />
11<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra Top<br />
Single-wall steel drawer, height 149 mm, single-extension, 30 kg,<br />
installation width 15.5 mm, bottom panel for screw fixing.<br />
12<br />
1 Integra drawer sides height, 149 mm<br />
3 Front fixing<br />
Click-on =<br />
front panel mounting without tools<br />
Slide-on =<br />
front fixing for screw fixing<br />
• 2-D front panel adjustment: for easy adjustment of gaps<br />
• Edge clearance: accurate contact between drawer slide and<br />
bottom panel, without chamfering the bottom panel<br />
• Can be converted into full-extension drawer<br />
• Parallel closing action: reliable closing, minimum gap widths<br />
• Double stop: holds the drawer securely in position when open<br />
Nominal length in mm Item No. white RAL 9010<br />
350 9303.350.2<br />
400 9303.400.2<br />
450 9303.450.2<br />
500 9303.500.2<br />
550 9303.550.2<br />
Packaging unit PU 5<br />
PU 5 = 5 sets, loose in carton<br />
2 Cover caps<br />
Item No. white RAL 9010<br />
9112.2.VE20<br />
PU 20<br />
9112.2.VE500<br />
PU 500<br />
Click-on Item No. left Item No. right Item No. left Item No. right<br />
For screw fixing 9305.L.VE10 9305.R.VE10 9305.L.VE250 9305.R.VE250<br />
With press-fit dowels 9306.L.VE10 9306.R.VE10 9306.L.VE250 9306.R.VE250<br />
With expanding dowels 9307.L.VE250 9307.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Slide-on Item No. left Item No. right Item No. left Item No. right<br />
For screw fixing 9205.L.VE10 9205.R.VE10 9205.L.VE250 9205.R.VE250<br />
With press-fit dowels 9206.L.VE10 9206.R.VE10 9206.L.VE250 9206.R.VE250<br />
With expanding dowels 9207.L.VE250 9207.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Imprinted cover caps on request.<br />
Front panel fixing for interior pull-out Page 20 Accessories Page 30 Technical information Page 34<br />
Railing Page 22 Installation technology Page 32
min. 19<br />
min. 148<br />
Fitting dimensions Cutting dimensions for 16 mm chipboard<br />
15.5 +1<br />
-0.5<br />
10<br />
10<br />
64<br />
32<br />
33<br />
131<br />
8<br />
bottom width = ICW– 31<br />
8.5<br />
inside cabinet width (ICW)<br />
bottom length = Integra nominal length (NL) – 5 mm<br />
front edge of cabinet<br />
32 37<br />
9 12<br />
For Ø 3.5<br />
chipboard screws 198<br />
or Euro screws 191/192<br />
back panel front<br />
16<br />
14<br />
35 2<br />
9x05<br />
Ø 3.5 x 15 mm<br />
chipboard screws<br />
9x06 / 9x07<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
Fixing positions for front of cabinet<br />
Drawer<br />
2<br />
Cover caps<br />
1<br />
15.5<br />
71 64 9<br />
bottom<br />
overlay<br />
side overlay<br />
Integra sides height 149 mm<br />
including cabinet slides<br />
3<br />
Front fixing<br />
Extension loss<br />
back panel<br />
ICW – 31<br />
bottom<br />
ICW – 31<br />
front<br />
can be<br />
selected<br />
Fixing positions for cabinet slides<br />
96<br />
64<br />
131<br />
nominal length – 5<br />
can be<br />
selected<br />
Length Extension loss 1 Extension loss 2<br />
350 105 89<br />
400 118 102<br />
450 118 102<br />
500 118 102<br />
550 118 102<br />
Extension loss 1: is the extension loss when the drawer is not held by stop.<br />
Extension loss 2: is the extension loss when the drawer is held by stop.<br />
96<br />
64<br />
front edge of cabinet<br />
128 128 96 128 37<br />
350<br />
400<br />
450<br />
500<br />
550<br />
All dimensions in millimetres.<br />
2<br />
13<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra Quick<br />
Single-wall steel drawer, height 85 mm, single extension, 30 kg,<br />
installation width 15.5 mm, bottom-panel for push-fitting.<br />
14<br />
1 Integra Quick drawer sides, height 85 mm<br />
3 Front fixing<br />
Click-on =<br />
front panel mounting without tools<br />
Slide-on =<br />
front fixing for screw fixing<br />
• Side connected to drawer bottom via push-fit, no screws:<br />
Efficient assembly<br />
• 2-D front panel adjustment: for easy adjustment of gaps<br />
• Edge clearance: accurate contact between drawer slide and<br />
bottom panel, without chamfering the bottom panel<br />
• Can be converted into full-extension drawer<br />
• Parallel closing action: reliable closing, minimum gap widths<br />
• Double stop: holds the drawer securely in position when open<br />
Nominal length in mm Item No. white RAL 9010<br />
350 9113.350.2<br />
400 9113.400.2<br />
450 9113.450.2<br />
500 9113.500.2<br />
550 9113.550.2<br />
PU/Packaging unit PU 10<br />
PU 10 = 10 sets, loose in carton<br />
2 Cover caps<br />
Click-on Item No. left Item No. right Item No. left Item No. right<br />
For screw-fixing 9305.L.VE10 9305.R.VE10 9305.L.VE250 9305.R.VE250<br />
With press-fit dowels 9306.L.VE10 9306.R.VE10 9306.L.VE250 9306.R.VE250<br />
With expanding dowels 9307.L.VE250 9307.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Information about compatible<br />
steel back panels on request.<br />
Item No. white RAL 9010<br />
9112.2.VE20<br />
PU 20<br />
9112.2.VE500<br />
PU 500<br />
Slide-on Item No. left Item No. right Item No. left Item No. right<br />
For screw-fixing 9205.L.VE10 9205.R.VE10 9205.L.VE250 9205.R.VE250<br />
With press-fit dowels 9206.L.VE10 9206.R.VE10 9206.L.VE250 9206.R.VE250<br />
With expanding dowels 9207.L.VE250 9207.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Imprinted cover caps on request.<br />
Front panel fixing for interior pull-out Page 20 Accessories Page 30 Technical information Page 34<br />
Railing Page 22 Installation technologies Page 32
min. 83 min. 19<br />
Fitting dimensions Cutting dimensions for 16 mm chipboard Integra Quick push-fit assembly<br />
15.5 +1<br />
-0.5<br />
9<br />
10<br />
10<br />
32<br />
33<br />
front edge of cabinet<br />
32 37<br />
9 12<br />
For Ø 3.5<br />
chipboard screws 198<br />
or Euro screws 191/192<br />
back panel front<br />
16<br />
70<br />
14<br />
35 2<br />
9x05<br />
Ø 3.5 x 15 mm<br />
chipboard screws<br />
9x06 / 9x07<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
Ø 5<br />
10<br />
bottom width = ICW– 31<br />
8.5<br />
inside cabinet width (ICW)<br />
bottom length = Integra nominal length (NL) – 5 mm<br />
Fixing positions for front of cabinet<br />
Drawer<br />
2<br />
Cover caps<br />
1<br />
15.5<br />
Integra sides height 85 mm<br />
including cabinet slides<br />
3<br />
Front fixing<br />
7 64 9<br />
bottom<br />
overlay<br />
side overlay<br />
69 32<br />
Extension loss<br />
back panel<br />
ICW – 31<br />
bottom<br />
ICW – 31<br />
front<br />
can be<br />
selected<br />
70<br />
nominal length – 5<br />
can be<br />
selected<br />
Fixing positions for carcass slides<br />
96<br />
64<br />
96<br />
64<br />
Fit drawer bottom easily<br />
and quickly without screws.<br />
Length Extension loss 1 Extension loss 2<br />
350 88 72<br />
400 101 85<br />
450 101 85<br />
500 101 85<br />
550 101 85<br />
Extension loss 1: is the extension loss when the drawer is not held by stop.<br />
Extension loss 2: is the extension loss when the drawer is held by stop.<br />
front edge of cabinet<br />
128 128 96 128 37<br />
350<br />
400<br />
450<br />
500<br />
550<br />
All dimensions in millimetres.<br />
2<br />
15<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra Quick<br />
Single-wall steel drawer, height 149 mm, single-extension,<br />
30 kg installation width 15.5 mm, bottom panel for push-fitting.<br />
16<br />
1 Integra Quick drawer sides, height 149 mm<br />
3 Front fixing<br />
Click-on =<br />
front panel mounting without tools<br />
Slide-on =<br />
front fixing for screw fixing<br />
• Side connected to drawer bottom via push-fit, no screws:<br />
Efficient assembly<br />
• 2-D front panel adjustment: for easy adjustment of gaps<br />
• Edge clearance: accurate contact between drawer slide and<br />
bottom panel, without chamfering the bottom panel<br />
• Can be converted into full-extension drawer<br />
• Parallel closing action: reliable closing, minimum gap widths<br />
• Double stop: holds the drawer securely in position when open<br />
Nominal length in mm Item No. white RAL 9010<br />
350 9313.350.2<br />
400 9313.400.2<br />
450 9313.450.2<br />
500 9313.500.2<br />
550 9313.550.2<br />
PU/Packaging unit PU 5<br />
PU 5 = 5 sets, loose in carton<br />
2 Cover caps<br />
Click-on Item No. left Item No. right Item No. left Item No. right<br />
For screw-fixing 9305.L.VE10 9305.R.VE10 9305.L.VE250 9305.R.VE250<br />
With press-fit dowels 9306.L.VE10 9306.R.VE10 9306.L.VE250 9306.R.VE250<br />
With expanding dowels 9307.L.VE250 9307.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Item No. white RAL 9010<br />
9112.2.VE20<br />
PU 20<br />
9112.2.VE500<br />
PU 500<br />
Slide-on Item No. left Item No. right Item No. left Item No. right<br />
For screw-fixing 9205.L.VE10 9205.R.VE10 9205.L.VE250 9205.R.VE250<br />
With press-fit dowels 9206.L.VE10 9206.R.VE10 9206.L.VE250 9206.R.VE250<br />
With expanding dowels 9207.L.VE250 9207.R.VE250<br />
Packaging unit PU 10 PU 10 PU 250 PU 250<br />
PU 10 = 10 pcs. in plastic bag, PU 250 = 250 pcs. in carton<br />
Imprinted cover caps on request.<br />
Front panel fixing for interior pull-out Page 20 Accessories Page 30 Technical information Page 34<br />
Railing Page 22 Installation technology Page 32
min. 19<br />
min. 148<br />
Fitting dimensions Cutting dimensions for 16 mm chipboard Integra Quick push-fit assembly<br />
15.5 +1<br />
-0.5<br />
9<br />
10<br />
10<br />
64<br />
32<br />
33<br />
131<br />
Ø 5<br />
10<br />
bottom width = ICW– 31<br />
8.5<br />
inside cabinet width (ICW)<br />
bottom length = Integra nominal length (ICW)<br />
front edge of cabinet<br />
32 37<br />
9 12<br />
For Ø 3.5<br />
chipboard screws 198<br />
or Euro screws 191/192<br />
back panel front<br />
16<br />
14<br />
35 2<br />
9x05<br />
Ø 3.5 x 15 mm<br />
chipboard<br />
screws<br />
9x06 / 9x07<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
Fixing positions for front of cabinet<br />
Drawer<br />
2<br />
Cover caps<br />
1<br />
15.5<br />
71 64 9<br />
bottom<br />
overlay<br />
side overlay<br />
Integra Quick sides height 149 mm<br />
including cabinet slides<br />
3<br />
Front fixing<br />
69 32<br />
back panel<br />
ICW – 31<br />
bottom<br />
ICW – 31<br />
front<br />
can be<br />
selected<br />
Loss of extension<br />
131<br />
nominal length – 5<br />
can be<br />
selected<br />
Fixing positions for cabinet slides<br />
Drawer<br />
96<br />
64<br />
96<br />
64<br />
Fit drawer bottom easily and<br />
quickly without screws.<br />
Length Loss of extension 1 Loss of extension 2<br />
350 105 89<br />
400 118 102<br />
450 118 102<br />
500 118 102<br />
550 118 102<br />
Loss of extension 1: is the loss of extension when the drawer is not held latched.<br />
Loss of extension 2: is the loss of extension when the drawer is held latched.<br />
front edge of cabinet<br />
128 128 96 128 37<br />
350<br />
400<br />
450<br />
500<br />
550<br />
All dimensions in millimetres.<br />
2<br />
17<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Full-extension drawer components for Integra single wall steel drawer system,<br />
30 kg, for side heights of 53, 85, 117 and 149 mm, installation width 15.5 mm.<br />
18<br />
1 Integra full-extension drawer components<br />
• Full-extension component for full access<br />
Integra Top drawer sides Page 6 Installation technology Page 32<br />
Integra Quick drawer sides Page 14 Technical information Page 34<br />
• 15 mm over-extension for full accessibility also where front panels are<br />
fitted to the drawer above<br />
• Compatible with the 32 mm system – can be replaced by<br />
single-extension drawer<br />
Complete drawers with full extension, comprising<br />
drawer, central and cabinet slide in industrial packaging, available on request.<br />
Nominal length in mm Item No. white RAL 9010<br />
350 9140.350.2<br />
400 9140.400.2<br />
450 9140.450.2<br />
500 9140.500.2<br />
550 9140.550.2<br />
PU/Packaging unit PU 1/10<br />
PU 1/10 = 1 set shrink-wrapped, 10 sets in carton
min. 51 min. 48<br />
Fitting dimensions System compatible<br />
15.5 +1<br />
-0,5<br />
10<br />
10<br />
32<br />
33<br />
For Ø 3.5<br />
chipboard screws 198<br />
or Euro screws 191/192<br />
back panel front<br />
16<br />
35/70/99/131<br />
front edge of cabinet<br />
32 37<br />
9x05<br />
Ø 3.5 x 15 mm<br />
chipboard screws<br />
9x06 / 9x07<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
8<br />
bottom width = ICW– 31<br />
8.5<br />
inside cabinet width (ICW)<br />
bottom length = Integra nominal length (NL) – 5 mm<br />
Fixing positions for front of cabinet<br />
1<br />
9 6<br />
6<br />
35 2<br />
Integra full-extension drawer components<br />
including cabinet slides<br />
15.5<br />
48<br />
7 64<br />
bottom<br />
overlay<br />
39 for 117 mm high side panel<br />
71 for 149 mm high side panel<br />
side overlay<br />
Over-extension<br />
32 32 32<br />
The over-extension of the fully<br />
fitted drawer is 15 mm.<br />
This gives full and unrestricted<br />
access to the drawer contents<br />
also where the drawer above has<br />
a front panel fitted.<br />
Fixing positions for cabinet slides<br />
Drawer<br />
96<br />
64<br />
full extension drawer<br />
96<br />
64<br />
32 mm<br />
system<br />
(vertical)<br />
The full-extension drawer is compatible with the<br />
single-extension drawer in system 32.<br />
15 mm<br />
front edge of cabinet<br />
128 128 96 128 37<br />
350<br />
400<br />
450<br />
500<br />
550<br />
All dimensions in millimetres.<br />
2<br />
19<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Front panel holder for inset drawers with side heights 85 and 149 mm,<br />
for screw fixing.<br />
9108<br />
Front panel holder for<br />
side height 85 mm<br />
20<br />
1 Integra front panel holder for inset drawer<br />
• Position of the front between the sides<br />
of the sides<br />
• The cabinet slides are fitted in the same position as for<br />
standard drawers<br />
• The front panel of the inset drawers has the same height<br />
as the back panel<br />
• Cutting is uniform and efficient<br />
For side height 85 mm<br />
Item No. white<br />
9108.2.VE10<br />
For side height 149 mm 9308.2.VE10<br />
PU/Packaging unit PU 10<br />
PU 10 = 10 sets, loose in carton<br />
One set comprises:<br />
Front panel holder left and right, clamping parts and fixing screws<br />
Integra Top drawer sides Page 6 Installation technology Page 32<br />
Integra Quick drawer sides Page 14 Technical information Page 34<br />
9308<br />
Front panel holder for side<br />
height 149 mm
1<br />
Fitting dimensions<br />
min. 83 min. 19<br />
+1 15.5 -0.5 back panel<br />
front<br />
8<br />
32<br />
33<br />
16<br />
70<br />
bottom width = ICW– 31<br />
inside cabinet width (ICW)<br />
70<br />
width of front =<br />
width of bottom – 9<br />
or ICW – 40<br />
8<br />
15.5<br />
32<br />
27<br />
min. 184 min. 19<br />
+1<br />
15.5 -0.5<br />
back panel front<br />
8<br />
bottom width = ICW – 31<br />
inside cabinet width (ICW)<br />
131<br />
width of front =<br />
width of bottom – 9<br />
or ICW– 40<br />
Assembly with steel drawer side system, heights 85 and 149 mm Cutting dimensions for 16 mm chipboard<br />
Integra front panel holder sets for inset drawers<br />
10<br />
10<br />
64<br />
32<br />
33<br />
16<br />
131<br />
back panel<br />
ICW – 31<br />
bottom<br />
ICW – 31<br />
front<br />
ICW – 40<br />
70/131 nominal length – 21 70/131<br />
8<br />
15.5<br />
32 32<br />
32<br />
27<br />
All dimensions in millimetres.<br />
21<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Screw-fixing railing for Integra pot drawers with wooden back panel.<br />
22<br />
1 Integra railing set for screw fixing<br />
Accessories<br />
3570.1000.2<br />
Round tube for cutting<br />
by customer<br />
3575.2.VE20<br />
Divider railing clip<br />
• Adjustable side railing:<br />
Easy tilt adjustment of panel<br />
• Individual subdivision of storage space with adjustable<br />
divider railings<br />
• Powder-coated aluminium tube: easy to cut to individual<br />
requirements<br />
Nominal length in mm Item No. white RAL 9010<br />
450 3500.450.2<br />
500 3500.500.2<br />
550 3500.550.2<br />
PU/Packaging unit PU 1/20<br />
PU 1/20 = 1 set in plastic bag, 20 sets in carton<br />
One railing set comprises:<br />
2 side railings, 2 front fixings, 2 cover caps, 2 back railing holder<br />
Round tube, length 1000 mm<br />
Item No. white RAL 9010<br />
3570.1000.2<br />
Divider railing clip 3575.2.VE20<br />
PU/Packaging unit PU 20 pcs.<br />
Integra Top drawer sides Page 6 Accessories Page 30 Technical information Page 34<br />
Integra Quick drawer sides Page 14 Installation technology Page 32<br />
149 mm<br />
117 mm<br />
85 mm
min. 83 / 116 / 148<br />
Fitting dimensions<br />
15.5 +1<br />
-0.5<br />
10<br />
8<br />
32<br />
10<br />
33 32 32<br />
back panel front<br />
16<br />
124 (85 mm side panel)<br />
156 (117 mm side panel)<br />
188 (149 mm side panel)<br />
fix with<br />
pan-head screw<br />
Ø 3.5 x 15 mm<br />
Ø 3.5 x 15 mm<br />
chipboard<br />
screws<br />
bottom width = ICW– 31<br />
inside cabinet width (ICW)<br />
8.5<br />
15.5<br />
7 64 9<br />
64<br />
39 (117 mm)<br />
71 (149 mm)<br />
bottom<br />
overlay<br />
side overlay<br />
Assembly with single-wall steel drawer system, heights 85 and 149 mm<br />
Length of divider railing = ICW – 32 mm<br />
1<br />
Integra screw-fix<br />
railing set<br />
Divider railng clip<br />
min. 83 / 116 / 148<br />
Round tube<br />
15.5 +1<br />
-0.5<br />
10<br />
8<br />
10<br />
32<br />
64<br />
32<br />
33<br />
back panel front<br />
16<br />
156 (85 mm side panel)<br />
188 (117 mm side panel)<br />
220 (149 mm side panel)<br />
pan-head screw<br />
Ø 3.5 x 15 mm<br />
Ø 3.5 x 15 mm<br />
chipboard<br />
screws<br />
bottom width = ICW– 31<br />
inside cabinet width (ICW)<br />
8.5<br />
15.5<br />
Cutting dimensions for 16 mm chipboard<br />
back panel<br />
ICW – 31<br />
bottom<br />
16<br />
ICW – 31<br />
nominal length – 5 124 mm<br />
156 mm<br />
188 mm<br />
220 mm<br />
The angle of the panel can be adjusted<br />
by turning the adjustment screw at front<br />
7 64 9<br />
96<br />
39 (117 mm)<br />
71 (149 mm)<br />
bottom<br />
overlay<br />
side overlay<br />
All dimensions in millimetres.<br />
23<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Quick-mounting railing for Integra drawers<br />
with back panel in wood or steel<br />
3570.1000.2<br />
Round tube for cutting<br />
by customer<br />
24<br />
1 Integra quick-mounting railing<br />
3560<br />
Side railing,<br />
pre-assembled<br />
Accessories<br />
3575.2.VE20<br />
Divider railing clip<br />
• Quick fitting to the panel: no tools required<br />
• Side railing is easy to adjust by changing the tilt of the front panel<br />
• Divider railings are adjustable for individual subdivision<br />
of the storage space<br />
• Powder-coated aluminium tube for easy cutting to suit individual<br />
requirements<br />
3565<br />
Railing holder for wooden back panel<br />
Nominal length in mm Item No. white RAL 9010<br />
400 3560.400.2<br />
450 3560.450.2<br />
500 3560.500.2<br />
Back railing holder for wooden back panel, left 3565.L<br />
Back railing holder for wooden back panel, right 3565.R<br />
PU/Packaging unit PU 100<br />
PU 100 = 100 pcs. loose in carton<br />
Round tube, length 1000 mm<br />
Item No. white RAL 9010<br />
3570.1000.2<br />
Divider railing clip 3575.2.VE20<br />
PU/Packaging unit PU 20 pcs.<br />
Integra Top drawer sides Page 6 Accessories Page 30 Technical information Page 34<br />
Integra Quick drawer sides Page 14 Installation technology Page 32<br />
149 mm<br />
117 mm<br />
85 mm
Fitting dimensions<br />
min. 83 / 116 / 148<br />
15.5 +1<br />
-0.5<br />
10<br />
8<br />
32<br />
10<br />
33 32 32<br />
back panel front<br />
16<br />
124 (85 mm side panel)<br />
156 (117 mm side panel)<br />
188 (149 mm side panel)<br />
for quick-fit assembly<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
9x06 / 9x07<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
bottom width = ICW – 31<br />
inside cabinet width (ICW)<br />
8.5<br />
15.5<br />
7 64 9<br />
64<br />
39 (117 mm)<br />
71 (149 mm)<br />
bottom<br />
overlay<br />
side overlay<br />
Assembly with single-wall steel drawer system, heights 85 and 149 mm<br />
Tilt adjustment<br />
By turning the adjustment screw at the rear.<br />
1<br />
min. 83 / 116 / 148<br />
Integra quick-mounting railing<br />
Length of divider railing = ICW – 32 mm<br />
Adjustment screw<br />
Back railing holder<br />
right / left<br />
15.5 +1<br />
-0.5<br />
10<br />
8<br />
32<br />
10<br />
33 32 64<br />
back panel front<br />
16<br />
156 (85 mm side panel)<br />
188 (117 mm side panel)<br />
220 (149 mm side panel)<br />
for quick-fit assembly<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
9x06 / 9x07<br />
pre-drill with<br />
Ø 10 x 12.5 mm<br />
bottom width = ICW – 31<br />
inside cabinet width (ICW)<br />
Fitting the front panel<br />
8.5<br />
15.5<br />
Cutting dimensions for 16 mm chipboard<br />
10<br />
back panel<br />
ICW – 31<br />
bottom<br />
16<br />
ICW – 31<br />
nominal length – 5 124 mm<br />
156 mm<br />
188 mm<br />
220 mm<br />
7 64 9<br />
96<br />
39 (117 mm)<br />
71 (149 mm)<br />
bottom<br />
overlay<br />
side overlay<br />
Detail<br />
This panel is wedged into place by inserting the side railing<br />
into the 10 mm hole and turning it.<br />
All dimensions in millimetres.<br />
25<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Railing for single or double gallery surrounded pull-out shelves<br />
with single-extension slide 1700.<br />
26<br />
Integra railing for inset pull-out shelves<br />
357.1000.2<br />
Round tube<br />
3576.2.VE20<br />
Corner post, single<br />
• Easy and quick to install via push-fit between round tube<br />
and corner post<br />
• Powder-coated aluminium tube for easy cutting to suit<br />
individual requirements<br />
Single-extension slide 1700 Page 14 Installation technology Page 32<br />
Accessories Page 30 Technical information Page 34<br />
Round tube<br />
Item No. white RAL 9010<br />
3570.1000.2<br />
Corner post, single 3576.2.VE20<br />
Corner post, double 3577.2.VE20<br />
Divider railing clip 3575.2.VE20<br />
PU/Packaging unit PU 20<br />
PU 20 = 20 pcs. loose in carton<br />
3577.2.VE20<br />
Corner post, double<br />
3575.2.VE20<br />
Divider railing clip
Fitting dimensions<br />
min. 15 min. 62<br />
6.5<br />
16<br />
57<br />
+2<br />
12.5 bottom width = ICW – 25<br />
inside cabinet width (ICW)<br />
12.5<br />
Round tube<br />
(cross railing)<br />
Calculating the length of railings<br />
Side railing = nominal length – 25 mm<br />
Cross railing = inside cabinet width – 33 mm<br />
Divider railing = nominal length – 40 mm<br />
Round tube (divider railing)<br />
Divider railing clip<br />
Single side roller slide<br />
11<br />
Round tube<br />
(side railing)<br />
57<br />
min. 15 min. 90<br />
Corner post, double<br />
6.5<br />
16<br />
85<br />
+2<br />
12.5 bottom width = ICW – 25<br />
inside cabinet width (ICW)<br />
12.5<br />
11<br />
85<br />
All dimensions in millimetres.<br />
27<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Railing for suspension file drawer.<br />
28<br />
1 Integra railing for suspension file drawer<br />
• Secure screw connection between front and back panel<br />
for greater strength and load capacity<br />
• Side railing is adjustable for easy tilt adjustment<br />
of front panel<br />
• Oval aluminium tube, natural anodised, ensures good resistance<br />
to deflection and is scratch-proof<br />
Item No. anodised<br />
Suspension file railing set for NL 500 mm 3595.500.22<br />
Suspension file railing set for NL 550 mm 3595.550.22<br />
PU/Packaging unit PU 1/20<br />
PU 1/20 = 1 set in plastic bag, 20 sets in carton<br />
One railing set comprises:<br />
2 side railings, 2 front fixings, 2 back railing clips, 2 cover caps<br />
Integra Top drawer sides Page 6 Accessories Page 30 Technical information Page 34<br />
Integra Quick drawer sides Page 14 Installation technology Page 32<br />
149 mm<br />
117 mm<br />
85 mm
min. 83 min. 215<br />
Fitting dimensions<br />
15.5 +1<br />
-0.5<br />
8<br />
10<br />
32<br />
32<br />
33<br />
back panel front<br />
16<br />
235<br />
330 = A4<br />
Ø 3.5 x 15 mm<br />
chipboard<br />
screws<br />
bottom width = ICW – 31<br />
inside cabinet width (ICW)<br />
Drawing: Integra with 85 mm side height<br />
Assembly<br />
1<br />
Integra railing set for<br />
suspension file drawers<br />
pan-head screw<br />
Ø 3.5 x 15 mm<br />
260<br />
8.5<br />
15.5<br />
7 64 9<br />
189<br />
39 for 117 mm high side panel<br />
71 for 149 mm high side panel<br />
bottom<br />
overlay<br />
side overlay<br />
A4 = 330<br />
Cutting dimensions for 16 mm chipboard<br />
back panel<br />
ICW – 31<br />
bottom<br />
16<br />
ICW – 31<br />
nominal length – 5 235 mm<br />
The angle of the front panel can be adjusted<br />
by turning the adjustment screw<br />
All dimensions in millimetres.<br />
29<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Accessories.<br />
Euro screw, nickel-plated<br />
Item No./Ø 6.3 x 10.5 mm Item No./Ø 6.3 x 14 mm<br />
191 192<br />
PU 1000<br />
PU 1000 = 1000 pieces<br />
PU 1000<br />
30<br />
Spacer, symmetrical Application with symmetrical spacer<br />
For double-sided spacing for<br />
interior pull-outs behind doors.<br />
Item No. natural<br />
Spacer, symmetrical 3800.13.VE100<br />
PU/Packaging unit PU 100<br />
Spacer, asymmetrical<br />
For single-sided spacing for<br />
interior drawers behind doors.<br />
Item No. natural<br />
Spacer, asymmetrical 3802.13.VE100<br />
PU/Packaging unit PU 100<br />
Drawer stop for Integra single-extension pull-outs for front gap 1.5 mm<br />
Drawer stop for holding the<br />
drawer open.<br />
Ø 6.3<br />
length Ø 7.1<br />
32<br />
Chipboard screw, nickel-plated<br />
Item No./Ø 3.5 x 15 mm<br />
198<br />
PU 1000<br />
PU 1000 = 1000 pieces<br />
+2<br />
16<br />
57<br />
25 12.5 bottom width = ICW – 75<br />
inside cabinet width (ICW)<br />
12.5<br />
Application with asymmetrical spacer<br />
32<br />
Can be fitted left and right<br />
with Integra back panel.<br />
+2<br />
16<br />
85<br />
25 12.5 bottom width = ICW – 50<br />
inside cabinet width (ICW)<br />
12.5<br />
Item No.<br />
3810.13.VE100<br />
PU 100<br />
Ø 3.5<br />
15 Ø 7
Integra<br />
Installation technology.<br />
Standard equipment ZMV-tp<br />
ZMV-fix<br />
Integrafit drilling jig<br />
zmv-tp<br />
Manual insertion die for Integra<br />
zmvfix<br />
For pre-drilling or marking the<br />
fixing positions for Integra front<br />
fixings and Integra Quick bottom<br />
panels.<br />
Consisting of:<br />
•Jig body<br />
• Marker ø 5 mm<br />
• Marker ø 10 mm<br />
Manual inserion die for<br />
Integra front fixings with<br />
press-fit dowels.<br />
• Simple and straightforward handling<br />
• Sturdy construction<br />
• For small series manufacture<br />
• Pneumatic control<br />
• High performance<br />
• CE tested<br />
For the rapid assembly of double and single-wall<br />
drawer systems from <strong>Grass</strong>. Suitable<br />
for drawers and pull-outs in the <strong>Grass</strong><br />
series up to a cabinet width of 1200mm.<br />
Product Designation Item No.<br />
ZMV-tp F146109859299<br />
PU/packaging unit 1pcs.<br />
ZMV-fix Item No.<br />
Assembly jig<br />
PU/packing unit 1 pcs.<br />
95601<br />
Item No.<br />
3960<br />
PU 1 piece<br />
Manual insertion die for Integra<br />
Front fixing 9006 3935<br />
Front fixing 9206 3937<br />
Front fixing 9306 3938<br />
Packaging unit PU 1 piece<br />
31<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Integra<br />
Installation technology.<br />
32<br />
Drilling jig for cabinet slide<br />
Item No.<br />
2110<br />
PU 1 piece<br />
Marker jig set<br />
For front fixing 9005<br />
Consisting of:<br />
• Marker jig, left<br />
• Marker jig, right<br />
• 4 marker points<br />
Item No.<br />
3985<br />
PU 100<br />
Handy metal drilling jig for pre-drilling the<br />
cabinet slide position with pilot drill bit.<br />
Use for:<br />
• Integra<br />
• single-extension roller slides<br />
• full-extension roller slides<br />
For front fixing 92059305<br />
Consisting of:<br />
• Marker jig, left<br />
• Marker jig, right<br />
• 4 marker points<br />
Item No.<br />
3986<br />
PU 100<br />
Pilot drill bit Ø 3.5 mm Screwdriver<br />
Pilot drill bit for pre-drilling<br />
countersink chipboard screws,<br />
Ø 3.5 mm.<br />
Spare drill bit<br />
Item No.<br />
35692<br />
PU 1<br />
Item No.<br />
90561<br />
PU 1<br />
PU/Packaging unit 1 = 1 piece<br />
<strong>Grass</strong> cross-head<br />
screwdriver<br />
(Pozidrive no. 2)<br />
Item No.<br />
10256-00<br />
PU 1 piece
32 32 32<br />
Technical information<br />
for Integra.<br />
Small minimum gap<br />
The parallel closing action ensures<br />
that all gaps are kept to a minimum.<br />
Minimum gap for 19 mm panel =<br />
0.5 mm<br />
Notes on assembly<br />
Front fixing with<br />
press-fit dowel<br />
32 mm increments<br />
Front fixing with<br />
expanding dowel<br />
Easy cabinet design based on 32 mm frame height increments.<br />
full extension drawer<br />
32 mm<br />
system<br />
(vertical)<br />
Minimum gap in mm<br />
When using front fixings with press-fit dowels, the dowel holes should be countersunk. Otherwise, the sharp<br />
edges of the holes in hard surface coatings, such as melamine, may strip the fins off the dowels when they<br />
are pushed in. This can lead to a significant reduction of the expanding. Alternatively, it is possible to use front<br />
fixings with expanding dowels, which will guarantee optimum expanding and do not require countersinking.<br />
Height 53<br />
Height 85<br />
Height 117<br />
Height 149<br />
32 mm system<br />
33<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
Technical information<br />
for Integra.<br />
34<br />
Height adjustment with eccentric cam<br />
Integra Click-on and Slide-on<br />
These fittings are supplied from the factory with the height setting at zero. They can therefore be adjusted upwards or downwards.<br />
If assembly makes a correction necessary:<br />
• Release fixing screw<br />
• Turn the eccentric adjustment cam<br />
• Retighten fixing screw<br />
Integra Click-on<br />
Removal space<br />
The removal space required is small<br />
as the drawer is lifted in and out<br />
with the 'rollers above the axis'<br />
Unlock for<br />
removing<br />
Lateral adjustment<br />
Eccentric cam for height adjustment<br />
Fixing screw<br />
Height adjustment<br />
51/83/116/148 19<br />
Integra Slide-on<br />
Fixing screw<br />
Lateral adjustment<br />
Eccentric cam for<br />
height adjustment
Drawer front insertion<br />
Integra Click-on<br />
1 Insert the front<br />
2 Panel will automatically<br />
click into place<br />
Integra Slide-on<br />
1 Insert the front<br />
2 Fix panel with fixing screw<br />
Drawer front removing<br />
Integra Click-on<br />
1 Detach the front by turning in<br />
the direction of the arrow<br />
2 Take panel off<br />
Integra slide-on<br />
1 Release fixing screw<br />
2 Take panel off<br />
Unlock for removing<br />
Release fixing screw<br />
Fixing screw<br />
Click<br />
35<br />
Integra Top System<br />
information<br />
Integra Quick<br />
Full extension<br />
drawer<br />
Interior<br />
pull-out<br />
Railing systems<br />
Accessories<br />
Installation<br />
technology<br />
Technical<br />
notes
<strong>Grass</strong> GmbH<br />
Movement Systems<br />
<strong>Grass</strong> Platz 1<br />
A 6973 Höchst, Österreich<br />
Telefon +43 (0) 5578 701-0<br />
Telefax +43 (0) 5578 701-59<br />
E-Mail info@grass.eu<br />
F147100231000 – 05|2009 – 2.000 (ENG) – GRASS Advertising All errors and omissions excepted