Greenlee Catalog - Delco Wire and Cable Limited

Testing & Measurement
USA CANADA INTERNATIONAL
Tel: 800.435.0786 Tel: 800.435.0786 Tel: +1.815.397.7070
Fax: 800.451.2632 Fax: 800.524.2853 Fax: +1.815.397.9247
386
MADE FOR THE TRADE!
SENSORS & SCANNERS
SF-420AC Stud Sensor with AC Detection
SF-530 Multiscanner
• Reliable way to detect the presence of AC voltage and to find wood
or metal studs.
• Finds the edges of wood or metal studs up to 3/4" (19 mm) deep,
through typical drywall construction.
• DeepScan ® mode finds the edges of wood or metal studs up to 1-1/2" (38 mm)
deep for thick construction such as plywood, paneling, or tile over drywall.
• Non-contact detection of AC voltage.
• Senses the changes in subsurface densities to pinpoint studs and joists,
while detecting unshielded AC voltage.
• Dual scanning for more flexibility.
• Accessories included: (1) 9V battery.
• 1 Year Limited Warranty
CAT. NO. UPC NO. DESCRIPTION
SF-420AC 12137 Stud Finder
SPECIFICATIONS
battery Type 9 V alkaline (included)
Position Accuracy Stud Scan Mode: Typically within 1/8" (3 mm) using the dual
scan and mark procedure.
DeepScan Mode: Typically within 3/16" (5 mm) using the dual
scan and mark procedure.
Detection Depth Stud Scan Mode: Typically up to 3/4" (19 mm)
DeepScan Mode: Up to 1-1/2" (38 mm)
AC Position Accuracy Typically 90 V to 250 V at 50 Hz to 60 Hz within 6" (150 mm) of
a hot unshielded wire
AC Sensing Depth In typical drywall with Romex ® wiring, wires can be detected up
to 3" (76 mm) deep.
• Reliable way to detect the presence of AC voltage, find wood or metal studs,
metal pipes and rebar.
• Finds both wood and metal studs.
• AC scanning to trace hot wires.
• Metal scanning for finding pipes.
• Backlit display for easy viewing.
• Accessories included: (1) 9V battery.
• 1 Year Limited Warranty
CAT. NO. UPC NO. DESCRIPTION
SF-530 12138 Multiscanner
SPECIFICATIONS
battery Type 9 V alkaline (included)
Position Accuracy Stud Scan Mode: Typically within 1/8" (3 mm) using the dual
scan and mark procedure.
DeepScan Mode: Typically within 3/16" (5 mm) using the dual
scan and mark procedure.
Metal Scan Mode: Typically within 1/2" (13 mm)
Detection Depth Stud Scan Mode: Typically up to 3/4" (19 mm)
DeepScan Mode: Up to 1-1/2" (38 mm)
Metal Scan Mode: Up to 1-1/2" (38 mm) for copper; up to 3" (76 mm)
for rebar.
AC Position Accuracy Typically 90 V to 250 V at 50 Hz to 60 Hz within 6" (150 mm) of
a hot unshielded wire
AC Sensing Depth Typically 2" (50 mm)