Greenlee Catalog - Delco Wire and Cable Limited

Plumbing
USA CANADA INTERNATIONAL
Tel: 800.435.0786 Tel: 800.435.0786 Tel: +1.815.397.7070
Fax: 800.451.2632 Fax: 800.524.2853 Fax: +1.815.397.9247
442
POWER DRIVES
MADE FOR THE TRADE!
MINI-COLLINS ® /Pneumatic MINI COLLINS ® Power Drive
Mini-COLLinS ®
Puts power back into power threading — thread up to 2" pipe or
conduit, 1" bolt or rod, in seconds!
00074
• Lightweight and engineered to go anywhere — requires only
1-3/4" clearance for working in trenches, overhead, and in
tight quarters where only hand tools could be used before
• Built-in fill plug eliminates disassembly of gearbox for oiling
• Tightens nuts, drives cable pullers, turns hoists and jacks,
opens and closes valves, or drives up to 6" geared threaders
• Shock-resistant handle and durable construction provide years
of safe, dependable operation
PneUMATiC Mini-COLLinS ®
ROTHENBERGER’s Pneumatic MINI-COLLINS weighs only 27
pounds and is the most portable air-powered threader available!
00078
• For complete safety in hazardous environments such as
petroleum and chemical plants, mines or tunnels
• Reversible, non-sparking air motor develops 500 foot-pounds
of torque in either direction
• Cannot be damaged by overload, even when operated to
point of stall
MiNi-ColliNs ® pNeuMatiC MiNi-ColliNs ®
Threading Range:
• Pipe or conduit 1/8" to 2" 1/8" to 2"
• Bolt or rod
• With adapters &
1/4" to 1" 1/4" to 1"
geared threader 2-1/2" to 6" 2-1/2" to 6"
Motor: 115V, 15 amp or Reversible air motor
230V, 9 amp, develops 500 ft/lbs,
universal AC-DC forward and reverse;
reversible, requires 90-120 PSI
50-60 Hz (at 60-80 CFM) input
pressure
Switches:
• On/Off Deadman Safety lever throttle
(shuts off when released)
• Directional Forward, reverse Forward, reverse
Dimensions:
• Overall length 28” 27”
• Cord length 80” –
Cat. No. DesCriptioN lB
00074 MINI-COLLINS ® Drive, 115V 27.0
00078 Pneumatic MINI-COLLINS ® Drive 29.0
13950 MINI-COLLINS ® Drive, 230V 27.0
00119 Steel carrying case 5.0
00077 Safevise 5.0
13158 Adapter SUPER CUT 3.0
00110 Adapter Ridgid®* 00-R 3.5
00111 Adapter Ridgid®* 111-R 3.0
— Ridgid®* 12-R (No adaptor needed)
00116R Adapter Square shaft 7/8" 3.0
00117
Adapter Square shaft 1"
(for geared threader)
4.5
00118 Adapter Square shaft 1-1/4" 3.0
00077
13158 00117