Paper Faced Metal Bead and Trim - CGC

Be a d e x ® Paper-Faced Metal Outside Corner Bead,
90 Degree
PAPEr FACED
METAL bEAD AND TrIM
Tape On Bead and Paper Faced Metal Use for 90° outside corners. Suitable for use on any thickness of wallboard.
Trim Outside Corner Outside Corner,Tape On Bead
(B1W, B1XW EL, B1 Super Wide)
Standard lengths: 8', 9', 10'.
Dimensions
Style A B C D
A
B1W 3/4" 13/16" 9/16" 3/4"
D
B1W NB 3/4" 13/16" 9/16" 3/4"
B C
B1XW 5/8" 15/16" 11/16" 5/8"
B1XW EL 5/8" 13/16" 13/16" 5/8"
B1XW NB 5/8" 15/16" 11/16" 5/8"
B1X ELNB 5/8" 13/16" 13/16" 5/8"
B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16"
Note: XW = Extra Wide; EL = Even Leg; NB = No Bead.
Paper Faced Metal Designed for 135° corners. Offset bead is designed to give a true offset corner
Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on
On
Bead
( B1
OS)
any
thickness
of
wallboard.
Standard
lengths:
Dimensions
A
Style A B C D
B
B1 OS 5/8" 3/4" 1/2" 5/8"
D
C
Paper Faced Metal Installs easily to form a smooth rounded outside corner. The 3/4" radius can be
3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. Standard lengths:8', 9', 10'.
Tape On Bead (SLOC)
Dimensions
3/4" Radius
Style A Radius B
SLOC 5/8" 1-3/4" 5/8"
A
C
B
BEADEX Paper Faced Metal Designed for bay window offsets.Use to create a rounded 132° offset outside
Bullnose Offset Outside Corner, corner. Standard lengths: 8', 9', 10'.
Tape On Bead (SLOC OS)
Dimensions
Style A B C
3/4" Radius
SLOC OS 1-1/2" 1-1/2" 3/4"
A
C
B
BEADEX Paper Faced Metal Bead is similar to the SLOC series except for a 1-1/2" radius.Can be used for
1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. Standard lengths: 8', 10'.
Tape On Bead (Danish)
Dimensions
1 Style A B C
DANISH 3/4" 3” 3/4"
BEADEX Paper Faced Metal Reduced bead height results in less use of joint compound. Extra wide flanges
Outside Corner (Micro Bead) for maximum corner coverage. Standard lengths:8', 9', 10'.
Dimensions
Style A B C D
Micro Bead 3/4" 1" 1" 3/4"
15
1 Tape On Bead and Paper Faced Paper MetalFaced
Metal Use for 90° outside corners. Suitable for use on any thickness of wallboard.
Trim Outside Corner Outside Corner,Tape On Bead
(B1W, B1XW EL, B1 Super Wide)
Standard lengths: 8', 9', 10'.
Dimensions
Style A B C D
A
B1W 3/4" 13/16" 9/16" 3/4"
D
B1W NB 3/4" 13/16" 9/16" 3/4"
B C
B1XW 5/8" 15/16" 11/16" 5/8"
B1XW EL 5/8" 13/16" 13/16" 5/8"
B1XW NB 5/8" 15/16" 11/16" 5/8"
B1X ELNB 5/8" 13/16" 13/16" 5/8"
B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16"
Note: XW = Extra Wide; EL = Even Leg; NB = No Bead.
Paper Faced Paper MetalFaced
Metal Designed for 135° corners. Offset bead is designed to give a true offset corner
Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on
On
Bead
( B1
OS)
any
thickness
of
wallboard.
Standard
leng8'
thand
s:
10'.
Dimensions
A
Style A B C D
B
B1 OS 5/8" 3/4" 1/2" 5/8"
D
C
Paper Faced Paper MetalFaced
Metal Installs easily to form a smooth rounded outside corner. The 3/4" radius can be
3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. Standard lengths:8', 9', 10'.
Tape On Bead (SLOC)
Dimensions
3/4" Radius
Style A Radius B
SLOC 5/8" 1-3/4" 5/8"
A
C
B
Paper BEADEX Faced Paper MetalFaced
Metal Designed for bay window offsets.Use to create a rounded 132° offset outside
Bullnose Offset Outside Corner, corner. Standard lengths: 8', 9', 10'.
Tape On Bead (SLOC OS)
Dimensions
Style A B C
3/4" Radius
SLOC OS 1-1/2" 1-1/2" 3/4"
A
C
B
Paper BEADEX Faced Paper MetalFaced
Metal Bead is similar to the SLOC series except for a 1-1/2" radius.Can be used for
1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. Standard lengths: 8', 10'.
Tape On Bead (Danish)
Dimensions
/2" Radius1
Style A B C
A
C
DANISH 3/4" 3” 3/4"
B
Paper BEADEX Faced Paper MetalFaced
Metal Reduced bead height results in less use of joint compound. Extra wide flanges
Outside Corner (Micro Bead) for maximum corner coverage. Standard lengths:8', 9', 10'.
Dimensions
A
D
Style A B C D
B C
Micro Bead 3/4" 1" 1" 3/4"
1 Paper Faced Metal
Paper Faced Metal
Be a d e x
8' and 10'.
Paper Faced Metal
Paper Faced Metal
Paper Faced Metal
/2" Radius
A
C
B
Paper Faced Metal
A
D
B C
® Tape On Bead and Paper Faced Metal Use for 90° outside corners. Suitable for use on any thickness of wallboard.
Trim Outside Corner Outside Corner,Tape On Bead Standard lengths: 8', 9', 10'.
(B1W, B1XW EL, B1 Super Wide)
Dimensions
Style A B C D
A
B1W 3/4" 13/16" 9/16" 3/4"
D
B1W NB 3/4" 13/16" 9/16" 3/4"
B C
B1XW 5/8" 15/16" 11/16" 5/8"
B1XW EL 5/8" 13/16" 13/16" 5/8"
B1XW NB 5/8" 15/16" 11/16" 5/8"
B1X ELNB 5/8" 13/16" 13/16" 5/8"
B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16"
Paper-Faced Metal Outside Corner Bead,
Note: XW = Extra Wide; EL = Even Leg; NB = No Bead.
135 Degree, Offset
Paper Faced Metal Designed for 135° corners. Offset bead is designed to give a true offset corner
Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on
On
Bead
( B1
OS)
any
thickness
of
wallboard.
Standard
lengths:
Dimensions
A
Style A B C D
B
B1 OS 5/8" 3/4" 1/2" 5/8"
D
C
Paper Faced Metal Installs easily to form a smooth rounded outside corner. The 3/4" radius can be
3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. Standard lengths:8', 9', 10'.
Tape On Bead (SLOC)
Dimensions
3/4" Radius
Style A Radius B
SLOC 5/8" 1-3/4" 5/8"
A
C
B
BEADEX Paper Faced Metal Designed for bay window offsets.Use to create a rounded 132° offset outside
Bullnose Offset Outside Corner, corner. Standard lengths: 8', 9', 10'.
Tape On Bead (SLOC OS)
Dimensions
Style A B C
3/4" Radius
SLOC OS 1-1/2" 1-1/2" 3/4"
A
C
B
BEADEX Paper Faced Metal Bead is similar to the SLOC series except for a 1-1/2" radius.Can be used for
1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. Standard lengths: 8', 10'.
Tape On Bead (Danish)
Dimensions
1 Style A B C
DANISH 3/4" 3” 3/4"
BEADEX Paper Faced Metal Reduced bead height results in less use of joint compound. Extra wide flanges
Outside Corner (Micro Bead) for maximum corner coverage. Standard lengths:8', 9', 10'.
Dimensions
Style A B C D
Micro Bead 3/4" 1" 1" 3/4"
1 Tape On Bead and Paper Faced Paper Metal Faced Metal Use for 90° outside corners. Suitable for use on any thickness of wallboard.
Trim Outside Corner Outside Corner,Tape On Bead Standard lengths: 8', 9', 10'.
(B1W, B1XW EL, B1 Super Wide)
Dimensions
Style A B C D
A
B1W 3/4" 13/16" 9/16" 3/4"
D
B1W NB 3/4" 13/16" 9/16" 3/4"
B C
B1XW 5/8" 15/16" 11/16" 5/8"
B1XW EL 5/8" 13/16" 13/16" 5/8"
B1XW NB 5/8" 15/16" 11/16" 5/8"
B1X ELNB 5/8" 13/16" 13/16" 5/8"
B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16"
Note: XW = Extra Wide; EL = Even Leg; NB = No Bead.
Paper Faced Paper Metal Faced Metal Designed for 135° corners. Offset bead is designed to give a true offset corner
Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on
On
Bead
( B1
OS)
any
thickness
of
wallboard.
Standard
lengt8'
hsand
: 10'.
Dimensions
A
Style A B C D
B
B1 OS 5/8" 3/4" 1/2" 5/8"
D
C
Paper Faced Paper Metal Faced Metal Installs easily to form a smooth rounded outside corner. The 3/4" radius can be
3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. Standard lengths:8', 9', 10'.
Tape On Bead (SLOC)
Dimensions
3/4" Radius
Style A Radius B
SLOC 5/8" 1-3/4" 5/8"
A
C
B
Paper BEADEX Faced Paper Metal Faced Metal Designed for bay window offsets.Use to create a rounded 132° offset outside
Bullnose Offset Outside Corner, corner. Standard lengths: 8', 9', 10'.
Tape On Bead (SLOC OS)
Dimensions
Style A B C
3/4" Radius
SLOC OS 1-1/2" 1-1/2" 3/4"
A
C
B
Paper BEADEX Faced Paper Metal Faced Metal Bead is similar to the SLOC series except for a 1-1/2" radius.Can be used for
1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. Standard lengths: 8', 10'.
Tape On Bead (Danish)
Dimensions
/2" Radius 1 Style A B C
A
C
DANISH 3/4" 3” 3/4"
B
Paper BEADEX Faced Paper Metal Faced Metal Reduced bead height results in less use of joint compound. Extra wide flanges
Outside Corner (Micro Bead) for maximum corner coverage. Standard lengths:8', 9', 10'.
A
B C
D
Dimensions
Style A B C D
Micro Bead 3/4" 1" 1" 3/4"
1 Paper Faced Metal
Paper Faced Metal
8' and 10'.
Paper Faced Metal
Be a d e x
Paper Faced Metal
Paper Faced Metal
/2" Radius
A
C
B
Paper Faced Metal
A
B C
D
® Tape On Bead and Paper Faced Metal Use for 90° outside corners. Suitable for use on any thickness of wallboard.
Trim Outside Corner Outside Corner,Tape On Bead Standard lengths: 8', 9', 10'.
(B1W, B1XW EL, B1 Super Wide)
Dimensions
Style A B C D
A
B1W 3/4" 13/16" 9/16" 3/4"
D
B1W NB 3/4" 13/16" 9/16" 3/4"
B C
B1XW 5/8" 15/16" 11/16" 5/8"
B1XW EL 5/8" 13/16" 13/16" 5/8"
B1XW NB 5/8" 15/16" 11/16" 5/8"
B1X ELNB 5/8" 13/16" 13/16" 5/8"
B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16"
Note: XW = Extra Wide; EL = Even Leg; NB = No Bead.
Paper Faced Metal Designed for 135° corners. Offset bead is designed to give a true offset corner
Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on
On
Bead
( B1
OS)
any
thickness
of
wallboard.
Standard
lengths:
Dimensions
A
Style A B C D
B
B1 OS 5/8" 3/4" 1/2" 5/8"
D
C
Paper-Faced Metal Outside Corner Bead,
Bullnose, 3/4" Radius Paper Faced Metal Installs easily to form a smooth rounded outside corner. The 3/4" radius can be
3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. Standard lengths:8', 9', 10'.
Tape On Bead (SLOC)
Dimensions
3/4" Radius
Style A Radius B
SLOC 5/8" 1-3/4" 5/8"
A
C
B
BEADEX Paper Faced Metal Designed for bay window offsets.Use to create a rounded 132° offset outside
Bullnose Offset Outside Corner, corner. Standard lengths: 8', 9', 10'.
Tape On Bead (SLOC OS)
Dimensions
Style A B C
3/4" Radius
SLOC OS 1-1/2" 1-1/2" 3/4"
A
C
B
BEADEX Paper Faced Metal Bead is similar to the SLOC series except for a 1-1/2" radius.Can be used for
1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. Standard lengths: 8', 10'.
Tape On Bead (Danish)
Dimensions
1 Style A B C
DANISH 3/4" 3” 3/4"
BEADEX Paper Faced Metal
Outside Corner (Micro Bead)
Reduced bead height results in less use of joint compound. Extra wide flanges
for maximum corner coverage. Standard lengths:8', 9', 10'.
1 Tape On Bead and Paper Paper Faced Faced Metal Metal Use for 90° outside corners. Suitable for use on any thickness of wallboard.
Trim Outside Corner Outside Corner,Tape On Bead Standard lengths: 8', 9', 10'.
(B1W, B1XW EL, B1 Super Wide)
Dimensions
Style A B C D
A
B1W 3/4" 13/16" 9/16" 3/4"
D
B1W NB 3/4" 13/16" 9/16" 3/4"
B C
B1XW 5/8" 15/16" 11/16" 5/8"
B1XW EL 5/8" 13/16" 13/16" 5/8"
B1XW NB 5/8" 15/16" 11/16" 5/8"
B1X ELNB 5/8" 13/16" 13/16" 5/8"
B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16"
Note: XW = Extra Wide; EL = Even Leg; NB = No Bead.
Paper Paper Faced Faced Metal Metal Designed for 135° corners. Offset bead is designed to give a true offset corner
Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on
On
Bead
( B1
OS)
any
thickness
of
wallboard.
Standard
lengths:
8' and 10'.
Dimensions
A
Style A B C D
B
B1 OS 5/8" 3/4" 1/2" 5/8"
D
C
Paper Paper Faced Faced Metal Metal Installs easily to form a smooth rounded outside corner. The 3/4" radius can be
3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. Standard lengths:8', 9', 10'.
Tape On Bead (SLOC)
Dimensions
3/4" Radius
Style A Radius B
SLOC 5/8" 1-3/4" 5/8"
A
C
B
BEADEX Paper Paper Faced Faced Metal Metal Designed for bay window offsets.Use to create a rounded 132° offset outside
Bullnose Offset Outside Corner, corner. Standard lengths: 8', 9', 10'.
Tape On Bead (SLOC OS)
Dimensions
Style A B C
3/4" Radius
SLOC OS 1-1/2" 1-1/2" 3/4"
A
C
B
BEADEX Paper Paper Faced Faced Metal Metal Bead is similar to the SLOC series except for a 1-1/2" radius.Can be used for
1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. Standard lengths: 8', 10'.
Tape On Bead (Danish)
Dimensions
1 /2" Radius
Style A B C
A
C
DANISH 3/4" 3” 3/4"
B
BEADEX Paper Paper Faced Faced Metal Metal
Outside Corner (Micro Bead)
Reduced bead height results in less use of joint compound. Extra wide flanges
for maximum corner coverage. Standard lengths:8', 9', 10'.
1 Paper Faced Metal
Paper Faced Metal
8' and 10'.
Paper Faced Metal
Paper Faced Metal
Be a d e x
Paper Faced Metal
/2" Radius
A
C
B
Paper Faced Metal
® Tape On Bead and Paper Faced Metal Use for 90° outside corners. Suitable for use on any thickness of wallboard.
Trim Outside Corner Outside Corner,Tape On Bead Standard lengths: 8', 9', 10'.
(B1W, B1XW EL, B1 Super Wide)
Dimensions
Style A B C D
A
B1W 3/4" 13/16" 9/16" 3/4"
D
B1W NB 3/4" 13/16" 9/16" 3/4"
B C
B1XW 5/8" 15/16" 11/16" 5/8"
B1XW EL 5/8" 13/16" 13/16" 5/8"
B1XW NB 5/8" 15/16" 11/16" 5/8"
B1X ELNB 5/8" 13/16" 13/16" 5/8"
B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16"
Note: XW = Extra Wide; EL = Even Leg; NB = No Bead.
Paper Faced Metal Designed for 135° corners. Offset bead is designed to give a true offset corner
Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on
On
Bead
( B1
OS)
any
thickness
of
wallboard.
Standard
lengths:
Dimensions
A
Style A B C D
B
B1 OS 5/8" 3/4" 1/2" 5/8"
D
C
Paper Faced Metal Installs easily to form a smooth rounded outside corner. The 3/4" radius can be
3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. Standard lengths:8', 9', 10'.
Tape On Bead (SLOC)
Dimensions
3/4" Radius
Style A Radius B
SLOC 5/8" 1-3/4" 5/8"
A
C
B
BEADEX Paper Faced Metal Designed for bay window offsets.Use to create a rounded 132° offset outside
Bullnose Offset Outside Corner, corner. Standard lengths: 8', 9', 10'.
Tape On Bead (SLOC OS)
Dimensions
Style A B C
3/4" Radius
SLOC OS 1-1/2" 1-1/2" 3/4"
A
C
B Paper-Faced Metal Outside Corner Bead,
Bullnose, 1 1/2" Radius, da n i Sh
BEADEX Paper Faced Metal Bead is similar to the SLOC series except for a 1-1/2" radius.Can be used for
1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. Standard lengths: 8', 10'.
Tape On Bead (Danish)
Dimensions
1 Style A B C
DANISH 3/4" 3” 3/4"
BEADEX Paper Faced Metal Reduced bead height results in less use of joint compound. Extra wide flanges
Outside Corner (Micro Bead) for maximum corner coverage. Standard lengths:8', 9', 10'.
Dimensions
Style A B C D
Micro Bead 3/4" 1" 1" 3/4"
1 Paper Faced Metal
Tape On Bead and Paper Faced Metal Use for 90° outside corners. Suitable for use on any thickness of wallboard.
Trim Outside Corner Outside Corner,Tape On Bead Standard lengths: 8', 9', 10'.
(B1W, B1XW EL, B1 Super Wide)
Dimensions
Style A B C D
A
B1W 3/4" 13/16" 9/16" 3/4"
D
B1W NB 3/4" 13/16" 9/16" 3/4"
B C
B1XW 5/8" 15/16" 11/16" 5/8"
B1XW EL 5/8" 13/16" 13/16" 5/8"
B1XW NB 5/8" 15/16" 11/16" 5/8"
B1X ELNB 5/8" 13/16" 13/16" 5/8"
B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16"
Note: XW = Extra Wide; EL = Even Leg; NB = No Bead.
Paper Faced Metal
Paper Faced Metal Designed for 135° corners. Offset bead is designed to give a true offset corner
Offset Outside Corner,Tape with a smaller bead height requiring less compound 8' and to 10'. finish. Can be used on
On
Bead
( B1
OS)
any
thickness
of
wallboard.
Standard
lengths:
Dimensions
A
Style A B C D
B
B1 OS 5/8" 3/4" 1/2" 5/8"
D
C
Paper Faced Metal
Paper Faced Metal Installs easily to form a smooth rounded outside corner. The 3/4" radius can be
3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. Standard lengths:8', 9', 10'.
Tape On Bead (SLOC)
Dimensions
3/4" Radius
Style A Radius B
SLOC 5/8" 1-3/4" 5/8"
A
C
B
Paper Faced Metal
BEADEX Paper Faced Metal Designed for bay window offsets.Use to create a rounded 132° offset outside
Bullnose Offset Outside Corner, corner. Standard lengths: 8', 9', 10'.
Tape On Bead (SLOC OS)
Dimensions
Style A B C
3/4" Radius
SLOC OS 1-1/2" 1-1/2" 3/4"
A
C
B
Paper Faced Metal
BEADEX Paper Faced Metal Bead is similar to the SLOC series except for a 1-1/2" radius.Can be used for
1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. Standard lengths: 8', 10'.
Tape On Bead (Danish)
/2" Radius
Dimensions
A 1 C
Style A B C
B
DANISH 3/4" 3” 3/4"
Paper Faced Metal
BEADEX Paper Faced Metal Reduced bead height results in less use of joint compound. Extra wide flanges
Outside Corner (Micro Bead) for maximum corner coverage. Standard lengths:8', 9', 10'.
A
B C
D
Dimensions
Style A B C D
Micro Bead 3/4" 1" 1" 3/4"
1 Paper Faced Metal
Paper Faced Metal
8' and 10'.
Paper Faced Metal
Paper Faced Metal
Paper Faced Metal
/2" Radius
A
C
B
Paper Faced Metal
A
B C
D
A A D D
Dimensions
Style Style A A B B C C D D