Be a d e x ® <strong>Paper</strong>-<strong>Faced</strong> <strong>Metal</strong> Outside Corner <strong>Bead</strong>, 90 Degree PAPEr FACED METAL bEAD AND TrIM Tape On <strong>Bead</strong> <strong>and</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Use for 90° outside corners. Suitable for use on any thickness of wallboard. <strong>Trim</strong> Outside Corner Outside Corner,Tape On <strong>Bead</strong> (B1W, B1XW EL, B1 Super Wide) St<strong>and</strong>ard lengths: 8', 9', 10'. Dimensions Style A B C D A B1W 3/4" 13/16" 9/16" 3/4" D B1W NB 3/4" 13/16" 9/16" 3/4" B C B1XW 5/8" 15/16" 11/16" 5/8" B1XW EL 5/8" 13/16" 13/16" 5/8" B1XW NB 5/8" 15/16" 11/16" 5/8" B1X ELNB 5/8" 13/16" 13/16" 5/8" B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16" Note: XW = Extra Wide; EL = Even Leg; NB = No <strong>Bead</strong>. <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for 135° corners. Offset bead is designed to give a true offset corner Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on On <strong>Bead</strong> ( B1 OS) any thickness of wallboard. St<strong>and</strong>ard lengths: Dimensions A Style A B C D B B1 OS 5/8" 3/4" 1/2" 5/8" D C <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Installs easily to form a smooth rounded outside corner. The 3/4" radius can be 3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths:8', 9', 10'. Tape On <strong>Bead</strong> (SLOC) Dimensions 3/4" Radius Style A Radius B SLOC 5/8" 1-3/4" 5/8" A C B BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for bay window offsets.Use to create a rounded 132° offset outside Bullnose Offset Outside Corner, corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Tape On <strong>Bead</strong> (SLOC OS) Dimensions Style A B C 3/4" Radius SLOC OS 1-1/2" 1-1/2" 3/4" A C B BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Tape On <strong>Bead</strong> (Danish) Dimensions 1 Style A B C DANISH 3/4" 3” 3/4" BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Reduced bead height results in less use of joint compound. Extra wide flanges Outside Corner (Micro <strong>Bead</strong>) for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. Dimensions Style A B C D Micro <strong>Bead</strong> 3/4" 1" 1" 3/4" 15 1 Tape On <strong>Bead</strong> <strong>and</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong><strong>Faced</strong> <strong>Metal</strong> Use for 90° outside corners. Suitable for use on any thickness of wallboard. <strong>Trim</strong> Outside Corner Outside Corner,Tape On <strong>Bead</strong> (B1W, B1XW EL, B1 Super Wide) St<strong>and</strong>ard lengths: 8', 9', 10'. Dimensions Style A B C D A B1W 3/4" 13/16" 9/16" 3/4" D B1W NB 3/4" 13/16" 9/16" 3/4" B C B1XW 5/8" 15/16" 11/16" 5/8" B1XW EL 5/8" 13/16" 13/16" 5/8" B1XW NB 5/8" 15/16" 11/16" 5/8" B1X ELNB 5/8" 13/16" 13/16" 5/8" B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16" Note: XW = Extra Wide; EL = Even Leg; NB = No <strong>Bead</strong>. <strong>Paper</strong> <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong><strong>Faced</strong> <strong>Metal</strong> Designed for 135° corners. Offset bead is designed to give a true offset corner Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on On <strong>Bead</strong> ( B1 OS) any thickness of wallboard. St<strong>and</strong>ard leng8' th<strong>and</strong> s: 10'. Dimensions A Style A B C D B B1 OS 5/8" 3/4" 1/2" 5/8" D C <strong>Paper</strong> <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong><strong>Faced</strong> <strong>Metal</strong> Installs easily to form a smooth rounded outside corner. The 3/4" radius can be 3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths:8', 9', 10'. Tape On <strong>Bead</strong> (SLOC) Dimensions 3/4" Radius Style A Radius B SLOC 5/8" 1-3/4" 5/8" A C B <strong>Paper</strong> BEADEX <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong><strong>Faced</strong> <strong>Metal</strong> Designed for bay window offsets.Use to create a rounded 132° offset outside Bullnose Offset Outside Corner, corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Tape On <strong>Bead</strong> (SLOC OS) Dimensions Style A B C 3/4" Radius SLOC OS 1-1/2" 1-1/2" 3/4" A C B <strong>Paper</strong> BEADEX <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong><strong>Faced</strong> <strong>Metal</strong> <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Tape On <strong>Bead</strong> (Danish) Dimensions /2" Radius1 Style A B C A C DANISH 3/4" 3” 3/4" B <strong>Paper</strong> BEADEX <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong><strong>Faced</strong> <strong>Metal</strong> Reduced bead height results in less use of joint compound. Extra wide flanges Outside Corner (Micro <strong>Bead</strong>) for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. Dimensions A D Style A B C D B C Micro <strong>Bead</strong> 3/4" 1" 1" 3/4" 1 <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Be a d e x 8' <strong>and</strong> 10'. <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> /2" Radius A C B <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> A D B C ® Tape On <strong>Bead</strong> <strong>and</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Use for 90° outside corners. Suitable for use on any thickness of wallboard. <strong>Trim</strong> Outside Corner Outside Corner,Tape On <strong>Bead</strong> St<strong>and</strong>ard lengths: 8', 9', 10'. (B1W, B1XW EL, B1 Super Wide) Dimensions Style A B C D A B1W 3/4" 13/16" 9/16" 3/4" D B1W NB 3/4" 13/16" 9/16" 3/4" B C B1XW 5/8" 15/16" 11/16" 5/8" B1XW EL 5/8" 13/16" 13/16" 5/8" B1XW NB 5/8" 15/16" 11/16" 5/8" B1X ELNB 5/8" 13/16" 13/16" 5/8" B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16" <strong>Paper</strong>-<strong>Faced</strong> <strong>Metal</strong> Outside Corner <strong>Bead</strong>, Note: XW = Extra Wide; EL = Even Leg; NB = No <strong>Bead</strong>. 135 Degree, Offset <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for 135° corners. Offset bead is designed to give a true offset corner Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on On <strong>Bead</strong> ( B1 OS) any thickness of wallboard. St<strong>and</strong>ard lengths: Dimensions A Style A B C D B B1 OS 5/8" 3/4" 1/2" 5/8" D C <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Installs easily to form a smooth rounded outside corner. The 3/4" radius can be 3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths:8', 9', 10'. Tape On <strong>Bead</strong> (SLOC) Dimensions 3/4" Radius Style A Radius B SLOC 5/8" 1-3/4" 5/8" A C B BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for bay window offsets.Use to create a rounded 132° offset outside Bullnose Offset Outside Corner, corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Tape On <strong>Bead</strong> (SLOC OS) Dimensions Style A B C 3/4" Radius SLOC OS 1-1/2" 1-1/2" 3/4" A C B BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Tape On <strong>Bead</strong> (Danish) Dimensions 1 Style A B C DANISH 3/4" 3” 3/4" BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Reduced bead height results in less use of joint compound. Extra wide flanges Outside Corner (Micro <strong>Bead</strong>) for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. Dimensions Style A B C D Micro <strong>Bead</strong> 3/4" 1" 1" 3/4" 1 Tape On <strong>Bead</strong> <strong>and</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> Use for 90° outside corners. Suitable for use on any thickness of wallboard. <strong>Trim</strong> Outside Corner Outside Corner,Tape On <strong>Bead</strong> St<strong>and</strong>ard lengths: 8', 9', 10'. (B1W, B1XW EL, B1 Super Wide) Dimensions Style A B C D A B1W 3/4" 13/16" 9/16" 3/4" D B1W NB 3/4" 13/16" 9/16" 3/4" B C B1XW 5/8" 15/16" 11/16" 5/8" B1XW EL 5/8" 13/16" 13/16" 5/8" B1XW NB 5/8" 15/16" 11/16" 5/8" B1X ELNB 5/8" 13/16" 13/16" 5/8" B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16" Note: XW = Extra Wide; EL = Even Leg; NB = No <strong>Bead</strong>. <strong>Paper</strong> <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for 135° corners. Offset bead is designed to give a true offset corner Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on On <strong>Bead</strong> ( B1 OS) any thickness of wallboard. St<strong>and</strong>ard lengt8' hs<strong>and</strong> : 10'. Dimensions A Style A B C D B B1 OS 5/8" 3/4" 1/2" 5/8" D C <strong>Paper</strong> <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> Installs easily to form a smooth rounded outside corner. The 3/4" radius can be 3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths:8', 9', 10'. Tape On <strong>Bead</strong> (SLOC) Dimensions 3/4" Radius Style A Radius B SLOC 5/8" 1-3/4" 5/8" A C B <strong>Paper</strong> BEADEX <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for bay window offsets.Use to create a rounded 132° offset outside Bullnose Offset Outside Corner, corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Tape On <strong>Bead</strong> (SLOC OS) Dimensions Style A B C 3/4" Radius SLOC OS 1-1/2" 1-1/2" 3/4" A C B <strong>Paper</strong> BEADEX <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Tape On <strong>Bead</strong> (Danish) Dimensions /2" Radius 1 Style A B C A C DANISH 3/4" 3” 3/4" B <strong>Paper</strong> BEADEX <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> Reduced bead height results in less use of joint compound. Extra wide flanges Outside Corner (Micro <strong>Bead</strong>) for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. A B C D Dimensions Style A B C D Micro <strong>Bead</strong> 3/4" 1" 1" 3/4" 1 <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> 8' <strong>and</strong> 10'. <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Be a d e x <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> /2" Radius A C B <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> A B C D ® Tape On <strong>Bead</strong> <strong>and</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Use for 90° outside corners. Suitable for use on any thickness of wallboard. <strong>Trim</strong> Outside Corner Outside Corner,Tape On <strong>Bead</strong> St<strong>and</strong>ard lengths: 8', 9', 10'. (B1W, B1XW EL, B1 Super Wide) Dimensions Style A B C D A B1W 3/4" 13/16" 9/16" 3/4" D B1W NB 3/4" 13/16" 9/16" 3/4" B C B1XW 5/8" 15/16" 11/16" 5/8" B1XW EL 5/8" 13/16" 13/16" 5/8" B1XW NB 5/8" 15/16" 11/16" 5/8" B1X ELNB 5/8" 13/16" 13/16" 5/8" B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16" Note: XW = Extra Wide; EL = Even Leg; NB = No <strong>Bead</strong>. <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for 135° corners. Offset bead is designed to give a true offset corner Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on On <strong>Bead</strong> ( B1 OS) any thickness of wallboard. St<strong>and</strong>ard lengths: Dimensions A Style A B C D B B1 OS 5/8" 3/4" 1/2" 5/8" D C <strong>Paper</strong>-<strong>Faced</strong> <strong>Metal</strong> Outside Corner <strong>Bead</strong>, Bullnose, 3/4" Radius <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Installs easily to form a smooth rounded outside corner. The 3/4" radius can be 3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths:8', 9', 10'. Tape On <strong>Bead</strong> (SLOC) Dimensions 3/4" Radius Style A Radius B SLOC 5/8" 1-3/4" 5/8" A C B BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for bay window offsets.Use to create a rounded 132° offset outside Bullnose Offset Outside Corner, corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Tape On <strong>Bead</strong> (SLOC OS) Dimensions Style A B C 3/4" Radius SLOC OS 1-1/2" 1-1/2" 3/4" A C B BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Tape On <strong>Bead</strong> (Danish) Dimensions 1 Style A B C DANISH 3/4" 3” 3/4" BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Outside Corner (Micro <strong>Bead</strong>) Reduced bead height results in less use of joint compound. Extra wide flanges for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. 1 Tape On <strong>Bead</strong> <strong>and</strong> <strong>Paper</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Metal</strong> Use for 90° outside corners. Suitable for use on any thickness of wallboard. <strong>Trim</strong> Outside Corner Outside Corner,Tape On <strong>Bead</strong> St<strong>and</strong>ard lengths: 8', 9', 10'. (B1W, B1XW EL, B1 Super Wide) Dimensions Style A B C D A B1W 3/4" 13/16" 9/16" 3/4" D B1W NB 3/4" 13/16" 9/16" 3/4" B C B1XW 5/8" 15/16" 11/16" 5/8" B1XW EL 5/8" 13/16" 13/16" 5/8" B1XW NB 5/8" 15/16" 11/16" 5/8" B1X ELNB 5/8" 13/16" 13/16" 5/8" B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16" Note: XW = Extra Wide; EL = Even Leg; NB = No <strong>Bead</strong>. <strong>Paper</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Metal</strong> Designed for 135° corners. Offset bead is designed to give a true offset corner Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on On <strong>Bead</strong> ( B1 OS) any thickness of wallboard. St<strong>and</strong>ard lengths: 8' <strong>and</strong> 10'. Dimensions A Style A B C D B B1 OS 5/8" 3/4" 1/2" 5/8" D C <strong>Paper</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Metal</strong> Installs easily to form a smooth rounded outside corner. The 3/4" radius can be 3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths:8', 9', 10'. Tape On <strong>Bead</strong> (SLOC) Dimensions 3/4" Radius Style A Radius B SLOC 5/8" 1-3/4" 5/8" A C B BEADEX <strong>Paper</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Metal</strong> Designed for bay window offsets.Use to create a rounded 132° offset outside Bullnose Offset Outside Corner, corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Tape On <strong>Bead</strong> (SLOC OS) Dimensions Style A B C 3/4" Radius SLOC OS 1-1/2" 1-1/2" 3/4" A C B BEADEX <strong>Paper</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Metal</strong> <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Tape On <strong>Bead</strong> (Danish) Dimensions 1 /2" Radius Style A B C A C DANISH 3/4" 3” 3/4" B BEADEX <strong>Paper</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Metal</strong> Outside Corner (Micro <strong>Bead</strong>) Reduced bead height results in less use of joint compound. Extra wide flanges for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. 1 <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> 8' <strong>and</strong> 10'. <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Be a d e x <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> /2" Radius A C B <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> ® Tape On <strong>Bead</strong> <strong>and</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Use for 90° outside corners. Suitable for use on any thickness of wallboard. <strong>Trim</strong> Outside Corner Outside Corner,Tape On <strong>Bead</strong> St<strong>and</strong>ard lengths: 8', 9', 10'. (B1W, B1XW EL, B1 Super Wide) Dimensions Style A B C D A B1W 3/4" 13/16" 9/16" 3/4" D B1W NB 3/4" 13/16" 9/16" 3/4" B C B1XW 5/8" 15/16" 11/16" 5/8" B1XW EL 5/8" 13/16" 13/16" 5/8" B1XW NB 5/8" 15/16" 11/16" 5/8" B1X ELNB 5/8" 13/16" 13/16" 5/8" B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16" Note: XW = Extra Wide; EL = Even Leg; NB = No <strong>Bead</strong>. <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for 135° corners. Offset bead is designed to give a true offset corner Offset Outside Corner,Tape with a smaller bead height requiring less compound to finish. Can be used on On <strong>Bead</strong> ( B1 OS) any thickness of wallboard. St<strong>and</strong>ard lengths: Dimensions A Style A B C D B B1 OS 5/8" 3/4" 1/2" 5/8" D C <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Installs easily to form a smooth rounded outside corner. The 3/4" radius can be 3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths:8', 9', 10'. Tape On <strong>Bead</strong> (SLOC) Dimensions 3/4" Radius Style A Radius B SLOC 5/8" 1-3/4" 5/8" A C B BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for bay window offsets.Use to create a rounded 132° offset outside Bullnose Offset Outside Corner, corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Tape On <strong>Bead</strong> (SLOC OS) Dimensions Style A B C 3/4" Radius SLOC OS 1-1/2" 1-1/2" 3/4" A C B <strong>Paper</strong>-<strong>Faced</strong> <strong>Metal</strong> Outside Corner <strong>Bead</strong>, Bullnose, 1 1/2" Radius, da n i Sh BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Tape On <strong>Bead</strong> (Danish) Dimensions 1 Style A B C DANISH 3/4" 3” 3/4" BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Reduced bead height results in less use of joint compound. Extra wide flanges Outside Corner (Micro <strong>Bead</strong>) for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. Dimensions Style A B C D Micro <strong>Bead</strong> 3/4" 1" 1" 3/4" 1 <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Tape On <strong>Bead</strong> <strong>and</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Use for 90° outside corners. Suitable for use on any thickness of wallboard. <strong>Trim</strong> Outside Corner Outside Corner,Tape On <strong>Bead</strong> St<strong>and</strong>ard lengths: 8', 9', 10'. (B1W, B1XW EL, B1 Super Wide) Dimensions Style A B C D A B1W 3/4" 13/16" 9/16" 3/4" D B1W NB 3/4" 13/16" 9/16" 3/4" B C B1XW 5/8" 15/16" 11/16" 5/8" B1XW EL 5/8" 13/16" 13/16" 5/8" B1XW NB 5/8" 15/16" 11/16" 5/8" B1X ELNB 5/8" 13/16" 13/16" 5/8" B1 Super Wide 11/16" 1-1/16" 1-1/16" 11/16" Note: XW = Extra Wide; EL = Even Leg; NB = No <strong>Bead</strong>. <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for 135° corners. Offset bead is designed to give a true offset corner Offset Outside Corner,Tape with a smaller bead height requiring less compound 8' <strong>and</strong> to 10'. finish. Can be used on On <strong>Bead</strong> ( B1 OS) any thickness of wallboard. St<strong>and</strong>ard lengths: Dimensions A Style A B C D B B1 OS 5/8" 3/4" 1/2" 5/8" D C <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Installs easily to form a smooth rounded outside corner. The 3/4" radius can be 3/4" Bullnose Outside Corner, used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths:8', 9', 10'. Tape On <strong>Bead</strong> (SLOC) Dimensions 3/4" Radius Style A Radius B SLOC 5/8" 1-3/4" 5/8" A C B <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Designed for bay window offsets.Use to create a rounded 132° offset outside Bullnose Offset Outside Corner, corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Tape On <strong>Bead</strong> (SLOC OS) Dimensions Style A B C 3/4" Radius SLOC OS 1-1/2" 1-1/2" 3/4" A C B <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1-1/2" Bullnose Outside Corner, 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Tape On <strong>Bead</strong> (Danish) /2" Radius Dimensions A 1 C Style A B C B DANISH 3/4" 3” 3/4" <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Reduced bead height results in less use of joint compound. Extra wide flanges Outside Corner (Micro <strong>Bead</strong>) for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. A B C D Dimensions Style A B C D Micro <strong>Bead</strong> 3/4" 1" 1" 3/4" 1 <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> 8' <strong>and</strong> 10'. <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> /2" Radius A C B <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> A B C D A A D D Dimensions Style Style A A B B C C D D
Be a d e x ® <strong>Paper</strong>-<strong>Faced</strong> <strong>Metal</strong> Outside Corner <strong>Bead</strong>, Bullnose, 3/4" <strong>Paper</strong> Radius, <strong>Faced</strong> <strong>Metal</strong> Offset Be a d e x ® B1 <strong>Bead</strong>ed Flex, Flexible <strong>Metal</strong> Outside Corner <strong>Bead</strong> Be a d e x ® Flexible <strong>Metal</strong> Tape 16 A A A A 3/4" Radius 3/4" Radius 3 /4" Radius 3 /4" Radius B B B B 11 1 /2" Radius A 1 /2" Radius Bullnose, 1/2" Radius A C A A B C B B B C C D C C Tape On <strong>Bead</strong> (SLOC) Tape On <strong>Bead</strong> (SLOC) C <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Dimensions Style A Dimensions Radius B SLOC Style 5/8" A 1-3/4" Radius 5/8" B SLOC 5/8" 1-3/4" 5/8" 8' <strong>and</strong> 10'. 8' <strong>and</strong> 10'. PAPEr FACED METAL bEAD AND TrIM BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Metal</strong> Bullnose BEADEX <strong>Paper</strong> Offset <strong>Faced</strong> <strong>Paper</strong> Outside <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> Corner, Tape Bullnose On <strong>Bead</strong> Offset (SLOC Outside OS) Corner, Tape On <strong>Bead</strong> (SLOC OS) Designed for bay window offsets.Use to create a rounded 132° offset outside corner. Designed St<strong>and</strong>ard for bay lengths: window 8', 9', offsets.Use 10'. to create a rounded 132° offset outside corner. St<strong>and</strong>ard lengths: 8', 9', 10'. Dimensions Style A Dimensions B C SLOC Style OS 1-1/2" A 1-1/2" B 3/4" C SLOC OS 1-1/2" 1-1/2" 3/4" BEADEX <strong>Paper</strong> <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> 1-1/2" BEADEX <strong>Paper</strong> Bullnose <strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> Outside <strong>Faced</strong> <strong>Metal</strong> Corner, Tape 1-1/2" On <strong>Bead</strong> Bullnose (Danish) Outside Corner, Tape On <strong>Bead</strong> (Danish) <strong>Bead</strong> is similar to the SLOC series except for a 1-1/2" radius.Can be used for 1/2" <strong>Bead</strong> or 5/8" is similar drywall. to the St<strong>and</strong>ard SLOC lengths: series except 8', 10'. for a 1-1/2" radius.Can be used for 1/2" or 5/8" drywall. St<strong>and</strong>ard lengths: 8', 10'. Dimensions Style A Dimensions B C C DANISH Style DANISH 3/4" A 3/4" 3” B 3” 3/4" C 3/4" Be a d e x ® <strong>Paper</strong>-<strong>Faced</strong> <strong>Metal</strong> Outside Corner <strong>Bead</strong>, 1/2" Radius A C B outside inside <strong>Paper</strong> BEADEX<strong>Faced</strong> <strong>Paper</strong> <strong>Metal</strong> <strong>Faced</strong> <strong>Metal</strong> Reduced bead height results in less use of joint compound. Extra wide flanges Outside <strong>Paper</strong> BEADEX Corner <strong>Faced</strong> <strong>Paper</strong> (Micro <strong>Metal</strong> <strong>Faced</strong> <strong>Bead</strong>) <strong>Metal</strong> for Reduced maximum bead corner height coverage. results St<strong>and</strong>ard in less use lengths:8', of joint compound. 9', 10'. Extra wide flanges Outside Corner (Micro <strong>Bead</strong>) for maximum corner coverage. St<strong>and</strong>ard lengths:8', 9', 10'. D Dimensions Style A Dimensions B C D Micro Style <strong>Bead</strong> 3/4" A 1" B 1" C 3/4" D Micro <strong>Bead</strong> 3/4" 1" 1" 3/4"