JSC Catalog Vol. 6 - Jones Stephens Corporation

More documents

Recommendations

Info

Poly Insulation C 106 Jones Stephens Corp. • PlumBest • LTConnections PHYSICAL DATA PROPERTIES TEST METHODS Material Closed Cell Polyolefi n – Color Charcoal – Upper Use Limit 180°F (82°C) constant – Lower Use Limit -90°F (-68°C) – Density 1.5 lbs/ft 3 ASTM D 1622 Ozone Resistant Good ASTM D 1171 Thermal Conductivity (K) at 75° F (24°C) Mean Temp ASTM C 177 or C 518 BTU-in/hr-ft 2 - F° (W/m-K) 0.230 (0.033) – Water Absorption 0.02% by Volume ASTM E 96 Flame Speed Less than 25 ASTM E 84; CAN/ULC-S102.2-M88 Smoke Classifi cation Less than 50 ASTM E 84; CAN/ULC-S102.2-M88 THICKNESS RECOMMENDATIONS* - TO CONTROL CONDENSATION PIPE SIZE Normal Conditions (Max 85°F, 29°C - 70% R.H.) LINE TEMP 50° F 10° C LINE TEMP 35° F 2° C LINE TEMP 0° F -18° C LINE TEMP -20° F -29° C 3/8” ID thru 1 3/8” ID 3/8” 10 mm 1/2” 13 mm 3/4” 19 mm 1” 25 mm Over 1 3/8” thru 3” IPS 3/8” 10 mm 1/2” 13 mm 1” 25 mm 1” 25 mm Over 3” IPS thru 4” IPS** 3/8” 10 mm 1/2” 13 mm 1” 25 mm 1” 25 mm Over 4” IPS Mild Conditions (Max 80°F, 26°C - 50% R.H.) 1/2” 13 mm 3/4” 19 mm 1” 25 mm 1 1/4” 32 mm 3/8” ID thru 2 1/8” ID 3/8” 10 mm 3/8” 10 mm 3/8” 10 mm 1/2” 13 mm Over 2 1/8” thru 3” IPS 3/8” 10 mm 3/8” 10 mm 3/8” 10 mm 1/2” 13 mm Over 3” IPS thru 4” IPS** 3/8” 10 mm 3/8” 10 mm 1/2” 13 mm 3/4” 19 mm Over 4” IPS Severe Conditions (Max 90°F, 32°C - 80% R.H.) 3/8” 10 mm 1/2” 13 mm 1/2” 13 mm 3/4” 19 mm 3/8” ID thru 1 1/18” ID 3/4” 19 mm 3/4” 19 mm 1 1/4” 32 mm 1 1/4” 32 mm Over 1 1/8” ID thru 4” IPS 3/4” 19 mm 1” 25 mm 1 1/2” 38 mm 1 1/2” 38 mm Over 4” IPS 3/4” 19 mm 1” 25 mm 1 1/2” 38 mm 2” 50 mm Closed Cell Pipe Insulation in thickness notes within the specifi ed temperature ranges will prevent condensation on indoor piping under design conditions defi ned below. Thickness recommendations above 1” can be sleeved to achieve thickness desired. Normal: Maximum severity of indoor conditions seldom exceed 85° F (29° C) and 70% R.H. in United States. Mild: Typical conditions are most air-conditioned spaces and arid climates. Severe: Generally found in areas which excessive moisture is introduced or in poorly ventilated areas where the temperature may be depressed below the ambient. Under conditions of high humidity, additional thickness of insulation may be required. **Available: Nom. 1⁄2” or Nom. 3⁄4” thickness only CLOSED CELL “R” VALUES PER SQUARE FOOT Pipe OD or Nominal Insulation ID 3/8” 1/2” 5/8” 3/4” 7/8” 1 1/8” 1 3/8” 1 5/8” 1 7/8” 2 1/8” 2 3/8” 2 5/8” 2 7/8” 3 1/8” 3 1/2” 3 5/8” 4” 4 1/8” 4 1/2” 10 mm 13 mm 16 mm 19 mm 22 mm 29 mm 35 mm 41 mm - 54 mm - 67 mm - 79 mm - 92 mm 105 mm - - R Value 3/8” (10 mm) Wall 2.687 2.490 2.357 2.680 2.187 2.082 2.011 1.959 1.920 1.889 1.864 1.844 1.827 1.812 - - - - - R Value 1/2” (13 mm) Wall 3.844 3.582 3.375 3.223 3.107 4.835 2.822 2.737 2.672 2.620 2.578 2.544 2.514 2.490 2.459 2.449 2.425 2.418 2.399 R Value 3/4” (19 mm) Wall - 6.027 5.653 5.374 5.155 4.835 4.610 4.420 4.313 4.209 4.124 4.053 3.993 3.942 3.877 - - - - R Value 1” (25 mm) Wall - - 8.189 7.767 7.435 6.941 6.588 6.323 6.115 5.948 5.810 5.695 5.596 5.512 5.404 5.373 - 5.264 5.196 Note: “R” factors were calculated from using the K factor of .230 (75°F, 24°C mean temp) and nominal wall thickness is each case. Lower operating temperatures will result in improved R values. Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
Jones Stephens Corp. • PlumBest • LTConnections Semi-Slit Pipe Insulation Self-Sealing Pipe Insulation • 100% closed cell polyethylene • UPS shippable cartons - CARTON QUANTITIES ONLY • For outdoor use, paint with a high quality exterior acrylic latex paint SPECIFICATIONS: Density: 1.5 lbs./cubic foot; Mold growth: None; Temperature Range: -90° to 180°F; Flame/Smoke: 25/50; Water vapor permeability: less than .02 inches; Ozone resistance: Good 3/8” Wall Thickness PART NO. NOMINAL ID R VALUES CTS IPS FT/BOX I50058 5/8” 2.357 1/2” 3/8” 408’ I50075 3/4” 2.680 5/8” - 360’ I50078 7/8” 2.187 3/4” 1/2” 300’ I50118 1 1/8” 2.082 1” 3/4” 240’ I50138 1 3/8” 2.011 1 1/4” 1” 192’ I50158 1 5/8” 1.959 1 1/2” 1 1/4” 132’ I50178 2” 1.920 - 1 1/2” 108’ I50218 2 1/8” 1.889 2” - 90’ I50238 2 3/8” 1.864 - 2” 90’ I50258 2 5/8” 1.844 2 1/2” - 72’ 1/2” Wall Thickness PART NO. NOMINAL ID R VALUES CTS IPS FT/BOX I51058 5/8” 3.375 1/2” 3/8” 306’ I51078 7/8” 3.107 3/4” 1/2” 240’ I51118 1 1/8” 4.835 1” 3/4” 180’ I51138 1 3/8” 2.822 1 1/4” 1” 150’ I51158 1 5/8” 2.737 1 1/2” 1 1/4” 120’ I51178 2” 2.672 - 1 1/2” 90’ I51218 2 1/8” 2.620 2” - 84’ I51238 2 3/8” 2.578 - 2” 66’ I51258 2 5/8” 2.544 2 1/2” - 60’ 3/4” Wall Thickness PART NO. NOMINAL ID R VALUES CTS IPS FT/BOX I54050 1/2” 6.027 3/8” 1/4” 204’ I54058 5/8” 5.653 1/2” 3/8” 180’ I54075 3/4” 5.374 5/8” 1/2” 168’ I54078 7/8” 5.155 3/4” - 156’ I54118 1 1/8” 4.835 1” - 102’ I54138 1 3/8” 4.610 1 1/4” 1” 90’ I54158 1 5/8” 4.420 1 1/2” 1 1/4” 84’ I54178 2” 4.313 - 1 1/2” 66’ I54218 2 1/8” 4.209 2” - 54’ I54258 2 5/8” 4.053 2 1/2” - 48’ 1” Wall Thickness PART NO. NOMINAL ID R VALUES CTS IPS FT/BOX I55058 5/8” 8.189 1/2” 3/8” 108’ I55075 3/4” 7.767 5/8” 1/2” 102’ I55078 7/8” 7.435 3/4” - 90’ I55118 1 1/8” 6.941 1” - 90’ I55138 1 3/8” 6.588 1 1/4” 1” 72’ I55158 1 5/8” 6.323 1 1/2” 1 1/4” 60’ I55178 2” 6.115 - 1 1/2” 54’ I55218 2 1/8” 5.948 2” - 48’ I55258 2 5/8” 5.695 2 1/2” - 42’ Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com Poly Insulation • 100% closed cell polyethylene • UPS shippable cartons - CARTON QUANTITIES ONLY • Complete seal on hot or cold pipe • Two strips of self-adhesive seal easily at any length SPECIFICATIONS: Density: 1.5 lbs./cubic foot; Mold growth: None; Temperature Range: -90° to 180°F; Flame/Smoke: 25/50; Water vapor permeability: less than .02 inches; Ozone resistance: Good 3/8” Wall Thickness PART NO. NOMINAL ID R VALUES CTS IPS FT/BOX I52058 5/8” 2.357 1/2” 3/8” 408’ I52034 3/4” 2.680 5/8” - 360’ I52078 7/8” 2.187 3/4” 1/2” 300’ I52118 1 1/8” 2.082 1” 3/4” 240’ I52138 1 3/8” 2.011 1 1/4” 1” 192’ I52158 1 5/8” 1.959 1 1/2” 1 1/4” 132’ I52178 2” 1.920 - 1 1/2” 108’ I52218 2 1/8” 1.889 2” - 90’ I52238 2 3/8” 1.864 - 2” 90’ I52258 2 5/8” 1.844 2 1/2” - 72’ I52318 3 1/8” 1.812 3” - 54’ I52358 3 5/8” - 42’ 1/2” Wall Thickness PART NO. NOMINAL ID R VALUES CTS IPS FT/BOX I53038 3/8” 3.844 I53050 1/2” 3.582 I53058 5/8” 3.375 1/2” 3/8” 306’ I53075 3/4” 3.223 3/4” 1/2” 270’ I53078 7/8” 3.107 3/4” 1/2” 240’ I53118 1 1/8” 4.835 1” 3/4” 180’ I53138 1 3/8” 2.822 1 1/4” 1” 150’ I53158 1 5/8” 2.737 1 1/2” 1 1/4” 120’ I53178 2” 2.672 - 1 1/2” 90’ I53218 2 1/8” 2.620 2” - 84’ I53238 2 3/8” 2.578 - 2” 66’ I53258 2 5/8” 2.544 2 1/2” - 60’ I53318 3 1/8” 2.490 3” - 48’ I53312 3 1/2” 2.459 - 3” 42’ I53358 3 5/8” 2.449 3 1/2” - 42’ I53418 4 1/8” 2.418 4” - 30’ I53412 4 1/2” 2.399 - 4” 30’ 3/4” Wall Thickness PART NO. NOMINAL ID R VALUES CTS IPS FT/BOX I56058 5/8” 5.653 1/2” 3/8” 180’ I56075 3/4” 5.374 5/8” 1/2” 168’ I56078 7/8” 5.155 3/4” 1/2” 156’ I56118 1 1/8” 4.835 1” 3/4” 102’ I56138 1 3/8” 4.610 1 1/4” 1” 90’ I56158 1 5/8” 4.420 1 1/2” 1 1/4” 84’ I56218 2 1/8” 4.209 2” - 54’ 1” Wall Thickness PART NO. NOMINAL ID R VALUES CTS IPS FT/BOX I57058 5/8” 8.189 1/2” 3/8” 108’ I57078 7/8” 7.435 3/4” 1/2” 90’ I57115 3/4” 7.767 5/8” - 102’ I57118 1 1/8” 6.941 1” - 90’ I57138 1 3/8” 6.588 1 1/4” 1” 72’ I57158 1 5/8” 6.323 1 1/2” 1 1/4” 60’ I57178 2” 6.115 - 1 1/2” 54’ I57218 2 1/8” 5.948 2” - 56’ I57238 2 3/8” 5.810 - 2” 42’ I57258 2 5/8” 5.695 2 1/2” - 36’ C 107
Page 1:
Welcome to our newest catalog. Back
Page 5:
Jones Stephens Corp. • PlumBest
Page 8 and 9:
Decorative Kitchen A 4 Dispenser Fa
Page 10 and 11:
Decorative Bath A 6 Pop-up Vessel D
Page 12 and 13:
Decorative Bath A Jones Stephens Co
Page 14 and 15:
Decorative Bath Jones Stephens Corp
Page 16 and 17:
Decorative Bath A 12 Jones Stephens
Page 18 and 19:
Page 20 and 21:
Decorative Bath A 16 Lift And Turn
Page 22 and 23:
Decorative Bath A 18 Standard Two-H
Page 24 and 25:
Decorative Bath A 20 2” Metal Spu
Page 26 and 27:
Decorative Bath A 22 4-1/4” Round
Page 28 and 29:
Decorative Bath A 24 Brass Nipples
Page 30 and 31:
Page 32 and 33:
Decorative Bath A 28 Decorative Tan
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60: Jones Stephens Corp. • PlumBest
Page 75 and 76: Toll Free Phone 1-800-35-JONES (355
Page 93: Jones Stephens Corp. • PlumBest
Page 96 and 97: Repair Jones Stephens Corp. • Plu
Page 98 and 99: Test Caps and Plugs C 94 Knockout T
Page 100 and 101: Dishwasher/Washing Machine Parts Jo
Page 102 and 103: Dryer Vents Jones Stephens Corp.
Page 104 and 105: Pipe Sleeving/Sand Cloth C 100 Stre
Page 106 and 107: Rubber Insulation C 102 PHYSICAL PR
Page 108 and 109: Rubber Insulation Jones Stephens Co
Page 112 and 113: Insulation Tools/Dielectric Union J
Page 114 and 115: Water Heater Supplies C 110 Braided
Page 116 and 117: Pressure Gauges C 112 Sillcock/Wate
Page 118 and 119: Stud Guards C 114 Soft Aluminum Tub
Page 120 and 121: Stud Guards C 116 Holdrite Bracket
Page 122 and 123: Pipe Strap/Clamps Jones Stephens Co
Page 124 and 125: Lead Supplies/Roofing Repair C 120
Page 126 and 127: Bolts & Screws C 122 Instant Sealan
Page 128 and 129: Conduit Hanger Jones Stephens Corp.
Page 130 and 131: Meter Boxes C 126 Drop-In Concrete
Page 132 and 133: Boxes C 128 Shipping Boxes • 32 E
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Closet Flanges & Accessories Jones
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Floor Sinks & Accessories Jones Ste
Page 251:
Page 254 and 255:
Closet Flanges & Accessories F 250
Page 256 and 257:
Drain Bodies F 252 Shower Drain Bod
Page 258 and 259:
Spuds & Strainers F 254 Plastic Spu
Page 260 and 261:
Assembled Cast Iron Drains Jones St
Page 262 and 263:
Assembled Cast Iron Drains F 258 2
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Cleanout Bodies & Spuds F 264 Plast
Page 270 and 271:
Cleanout Plugs F 266 Code Pattern P
Page 272 and 273:
Assembled Cleanouts F 268 Push-On C
Page 274 and 275:
Assembled Cleanouts F 270 Adjustabl
Page 276 and 277:
General Purpose Drains F 272 Area D
Page 278 and 279:
Bell Traps F 274 Inside Caulk Bell
Page 280 and 281:
Service Sinks & Accessories Jones S
Page 282 and 283:
Vent Boxes/Caps/Backwater Valves F
Page 284 and 285:
Gas Burners/Log Lighter Valves/Acce
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Page 305 and 306:
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Page 315 and 316:
Page 317 and 318:
Page 319 and 320:
SECTION T - TUBULAR Chrome Plated .
Page 321 and 322:
Page 323 and 324:
Page 325 and 326:
Page 327 and 328:
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
PVC DWV FITTINGS ..................
Page 343 and 344:
Page 345 and 346:
Page 347 and 348:
Page 349 and 350:
Page 351:
Page 354 and 355:
Black & Galvanized Malleable Fittin
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Black & Galvanized Pipe Nipples BLA
Page 362 and 363:
Black & Galvanized Readycut Pipe Bl
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385:
Page 388 and 389:
Pegboard Merchandising M 384 PlumBe
Page 390 and 391:
Pegboard Merchandising M 386 Cam St
Page 392 and 393:
Tilt Bin Merchandising M 388 Comple
Page 394 and 395:
Tilt Bin Merchandising M 390 Brass
Page 396 and 397:
Tilt Bin Merchandising M 392 Mini C
Page 398 and 399:
Tilt Bin Merchandising M 394 Yellow
Page 400 and 401:
Gondola Merchandising M 396 Drain &
Page 402 and 403:
Gondola Merchandising M 398 PVC Pla
Page 404 and 405:
Drain Merchandising M 400 Recommend
Page 406 and 407:
Chemical Merchandising M 402 Flowea
Page 408 and 409:
Part Number Index 404 PART NO. PG #
Page 410 and 411:
Page 412 and 413:
Part Part Number Number Index Index
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Product Index 452 Shallow Cup Duo .
Page 458 and 459:
Product Index 454 4-N-1 Tube Fittin
Page 460 and 461:
Product Index 456 Floor Sinks .....
Page 462 and 463:
Product Index 458 Marvel Rings ....
Page 464 and 465:
Product Index 460 Red Rubber Sheet
Page 466 and 467:
Product Index 462 Adjustable, Strai
Page 468 and 469:
Product Index 464 Twine ...........
show all

JSC Catalog Vol. 6 - Jones Stephens Corporation

Create successful ePaper yourself

Delete template?

Save as template?