JSC Catalog Vol. 6 - Jones Stephens Corporation

Insulation Tools/Dielectric Union
Jones Stephens Corp. • PlumBest • LTConnections
Poly Pipe Insulation Tees & Elbows
C
108
• 100% closed cell polyethylene
• UPS shippable cartons - CARTON QUANTITIES ONLY
• Complete seal on hot or cold pipe
• Two strips of self-adhesive to seal easily
SPECIFICATIONS:
Density: 1.5 lbs./cubic foot; Mold growth: None;
Temperature Range: -90° to 180°F; Flame/Smoke:
25/50; Water vapor permeability: less than .02
inches; Ozone resistance: Good
PART NO. DESCRIPTION WALL THICKNESS CTN/MSTR
I59050 1/2” Tee 3/8” 1/16
I59075 3/4” Tee 3/8” 1/12
I59100 1” Tee 3/8” 1/12
I59125 1-1/4” Tee 3/8” 1/8
I59150 1/2” Elbow 3/8” 1/32
I59175 3/4” Elbow 3/8” 1/20
I59200 1” Elbow 3/8” 1/16
I59225 1-1/4” Elbow 3/8” 1/12
Insulation Contact Adhesive
• Brush top cans
• For use with rubber insulation only
• CARTON QUANTITIES ONLY
• MOTOR FREIGHT ONLY/FLAMMABLE
PART NO. DESCRIPTION CTN QTY
IA1050 Fast Tack 1/2 pint 48
IA1100 Fast Tack 1 pint 24
IA2050 Slow Tack 1/2 pint 48
IA2100 Slow Tack 1 pint 24
Insulation Protective Coating
PART NO. SIZE CTN QTY
IPC004 1 gallon 4
Insulation Tape
PART NO. DESCRIPTION CTN QTY
INT001 1/8” x 2” x 30’ cork tape 12
INT002 1/8” x 2” x 30’ tape 12
Flanged Dielectric Union
• Temperature range: 180°F at 200 PSI
• Maximum temperature 200°F
PART NO. FIP x COPPER SWEAT CTN/MSTR
D06250 2-1/2” x 2-1/2” 1/5
D06300 3” x 3” 1/5
D06400 4” x 4” 1/5
Thermal Expansion Tanks
• Designed for the protection of potable hot water systems
• Install between the backflow preventer an the water heater
• Specifications:
Factory pre-charge: 40psi
System Connection: 304 Stainless Steel
Diaphragm: Butyl Rubber
Liner Material: Food Grade Polypropylene
Max. Operating Temp.: 200°F
Max. Operating Pressure: 150psi
PART NO. DESCRIPTION CTN. QTY. PALLET QTY.
R15202 2 gallon tank 1 150
R15204 4-1/2 gallon tank 1 80
Dual Port Self Cleaning Thermal
Expansion Tank
• Designed for the protection of potable hot water systems
• Install between the backflow preventer and the water heater
• Specifications:
Factory pre-charge: 15psi
System Connection: 304 Stainless Steel
Diaphragm: Butyl Rubber
Liner Material: Food Grade Polypropylene
Max. Operating Temp.: 200°F
Max. Operating Pressure: 150psi
PART NO. DESCRIPTION CTN. QTY. PALLET QTY.
R15206 2 gallon tank 1 150
Dielectric Union - Lead Free
Female x Sweat
Female x Sweat
Male x Sweat
• Prevents electrolysis or galvanic action
when connecting dissimilar metals
• Residential or commercial use
• Zinc plated forged steel
• Solder ends conform to ANSI B16.19
• EPDM washer, ABS fiber sleeve
• Threads conform to ASNI B2.1
• Pressure rated at 250 PSI at 180°F
PART NO. FIP x COPPER SWEAT OD CTN/MSTR
D06050 1/2” x 1/2” 5/8” 24/144
D06075 3/4” x 3/4” 7/8” 12/144
D06100 1” x 1” 1-1/8” 12/120
D06125 1-1/4” x 1-1/4” 1-3/8” 6/48
D06150 1-1/2” x 1-1/2” 1-5/8” 6/48
D06200
Reducing
2” x 2” 2-1/8” 6/24
PART NO. FIP x COPPER SWEAT OD CTN/MSTR
D06350
Male x Sweat
3/4” x 1/2” 5/8” 24/144
PART NO. MIP x COPPER SWEAT OD CTN/MSTR
D06005 1/2” x 1/2” 7/8” 12/144
D06750
Reducing
3/4” x 3/4” 7/8” 24/96
PART NO. MIP x COPPER SWEAT OD CTN/MSTR
D06755 3/4” x 1/2” 5/8” 24/144
Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com