Performance report primergy rx300 s7 - fujitsu global

WHITE PAPER PERFORMANCE REPORT PRIMERGY RX300 S7 VERSION: 1.3 2012-10-09
Measurement with IBM J9 VM
The PRIMERGY RX300 S7 achieved the following result:
SPECpower_ssj2008 = 5,406 overall ssj_ops/watt
The adjoining diagram shows the result
of the configuration described above.
The red horizontal bars show the
performance to power ratio in
ssj_ops/watt (upper x-axis) for each
target load level tagged on the y-axis
of the diagram. The blue line shows
the run of the curve for the average
power consumption (bottom x-axis) at
each target load level marked with a
small rhomb. The black vertical line
shows the benchmark result of 5,406
overall ssj_ops/watt for the
PRIMERGY RX300 S7. This is the
quotient of the sum of the transaction
throughputs for each load level and the
sum of the average power consumed
for each measurement interval.
The following table shows the benchmark results for the throughput in ssj_ops, the power consumption in
watts and the resulting energy efficiency for each load level.
Performance Power Energy Efficiency
Target Load ssj_ops Average Power (W) ssj_ops/watt
100% 1,432,829 245 5,859
90% 1,291,012 216 5,988
80% 1,149,959 183 6,289
70% 1,003,836 153 6,555
60% 863,137 132 6,516
50% 720,232 117 6,173
40% 573,470 106 5,435
30% 431,904 95.2 4,535
20% 287,140 85.4 3,361
10% 143,632 75.3 1,906
Active Idle 0 54.0 0
∑ssj_ops / ∑power = 5,406
The PRIMERGY RX300 S7 achieved a new class record with this result, thus surpassing the
best result of the competition by 0.6% (date: September 19, 2012). Thus, the PRIMERGY
RX300 S7 proves itself to be the most energy-efficient 2-socket rack server in the world. The
current results can be found at http://www.spec.org/power_ssj2008/results.
Page 20 (59) © Fujitsu Technology Solutions 2012