Construction of Transfer Plate - Personal Cityu Edu Hk

More documents

Recommendations

Info

However, the construction of the transfer plate is usually quite difficult. Below are some of the reasons. 1. It usually located at a high altitude on top of the podium structure. In some design it can be over-hung from the building line. 2. The podium structure may not able to provide the working space or support ground for the construction of the transfer plate due to differences in floor layout. 3. The transfer plate is usually very large and heavy in weight. The thickness of the plate averaged around 2.5m to 3.5m and with size from 600m2 to 1500m2. It weighs more than 3000 tons. 4. To provide the working space and falsework to support the construction of the transfer plate is difficult and costly with reasons as explained above.
To overcome these difficulties, the following methods or provisions are often employed. 1. A very heavy duty falsework system is erected as support and work platform to carry out the works (including formwork erection, steel fixing, concreting and sometimes tensioning works). 2. Using the completed lower floors as support to erect the the transfer plate during construction, with additional propping erected, say, spreading through the below 3 to 4 floors in order to take up the loading of the transfer plate during concreting.
Page 1 and 2: Construction of Transfer Plate - fr
Page 3: To achieve this result, the layout
Page 7 and 8: In order to give a more direct illu
Page 9 and 10: Construction of the columns on the
Page 11 and 12: Aerial view of the temporary platfo
Page 13 and 14: Sectional view of a tower block bef
Page 15 and 16: Closer look at the formwork setup o
Page 17 and 18: Commencement of the superstructure
Page 19 and 20: Approx. location of transfer plate
Page 21 and 22: Project Case : The Belcher’s Gard
Page 23 and 24: Closer look at the transfer plates
Page 25 and 26: View of the transfer plate located
Page 27 and 28: Overview of the tower blocks seated
Page 29: The tower structure and the podium
Page 32 and 33: The 4m thick transfer plate support
Page 34 and 35: Construction of the upper structure
Page 41 and 42: Project Case : Residential Developm
Page 45 and 46: Transfer Plate
Page 47 and 48: Falsework supporting the formwork o
Page 49 and 50: Residential building in Jordan (Pre
Page 51 and 52: Residential redevelopment for KMB p
Page 53 and 54: Residential buildings in West Kowlo
Page 55 and 56:
Other residential projects with eye
show all

Construction of Transfer Plate - Personal Cityu Edu Hk

Create successful ePaper yourself

Delete template?

Save as template?