LEGION BRANCH CATALOGUE

GAMES ROOM
DART ACCESSORIES
Legion
Custom Dart Case
**DARTS NOT INCLUDED**
The Supply Department has contracted our
supplier to custom embroider a dart case
with the Legion Badge. This great compact
canvas case will hold a set of darts with the
flights on in a removable plastic holder. This
plastic holder insert keeps the dart flights in
game-ready condition. No more fidgeting
around trying to straighten out your flights
from being in a plain flat case. The durable
exterior is adorned with an embroidered full
colour Legion Badge. Double zipper on three
sides allows the whole front to fold back
for easy access to your darts and accessory
pockets inside. There is another zippered
pocket on the front for more storage. A
handy Velcro secured belt strap on the back
keeps your darts right on your side.
400233 $19.95
Actual Size
Dart and Cribbage Pins
Dart Board
**DARTBOARD
SURROUND NOT
INCLUDED**
A good quality dart board
can make all the difference
in the world to the level of
enjoyment of the game,
for both amateur and
skilled players. The Power
Head II dart board we offer
has two features that will
enhance your dart playing
experience. First is the
horse hair composition,
known for its superior
dart holding ability. You
don’t have to throw a 90 mile-an-hour fastball to make your dart stick. Second is the “nobounce”
dividing wire grid. Inferior boards have an actual wire grid that is superimposed
on the board to separate the sections. The wires are thick, and a dart that hits the wire will
bounce off and end up on the floor. The new technology incorporates a series of thin metal
sheets that are imbedded in the board itself, presenting only a thin edge for the dart to
strike. Your dart is much more likely to deflect and stay stuck in the board.
400207 $58.95
Dartboard Surround with Foam
**DARTBOARD NOT INCLUDED**
For Darts
and Dart Flights
see Pg. 35 and 43
Even the best of darts players miss the board sometimes, especially when trying to double
out on those pesky numbers at the bottom of the board. This is particularly distressing to
those with more expensive darts, when the dart bounces off a hard wall and crashes to the
even harder floor. There is now a product that mitigates the consequences of those near
misses. The Supply Department now carries a Dart Board Surround. This is a nice big dart
surround to protect your walls as well as your darts. It features a solid wood frame with
masonite back that holds the 30 inch square foam. The hardwood frame is finished in black
and holds a regulation size 18” dart board (sold separately). It's pre-drilled for hanging and
includes screws and plugs for mounting to the wall. The centre is even marked for easy
installation of your dart board.
400224 $65.00
Both dart and crib players appreciate recognition for significant events that, for most of us, occur more
rarely than we would prefer; hence the adage, “The older I get, the better I was.” We hope these pins fulfill
your need to recognize these great events. Specifically with the dart pins, we have had a range produced
allowing for variation in the level of players skill. Pins are all supplied with a standard butterfly clutch
backing and have been screen printed with an epoxy dome, a first for us. This method of manufacture was
necessary to achieve the detail required in these pins.
Dart Pins
400300 “100”
400301 “133”
400302 “140”
400303 “171”
400304 “180”
400305 “Big Finish”
Cribbage Pins
400306 “Perfect
Hand”
400307 “Almost
Perfect”
$2.95 each
SHUFFLEBOARD ACCESSORIES
Cribbage Board
Shuffleboard Rocks
High quality Shuffleboard rocks are essential to consistent play.
Shuffleboard rocks are also referred to as shuffleboard pucks or weights.
Sun-Glo Professional Grade (Spangler) pucks have patented thumb
push-offs. Spangler pucks are high-polish solid stainless steel (not
chrome plated). Stainless pucks last much longer than chrome plated
pucks which are more common. However these cheaper pucks use a
chrome plating process that will tend to chip or peel over time. These
are the large tournament size 2 5/16'' diameter. A set of rocks consists
of 4 Red and 4 Green.
400225 $250.00
Shuffleboard Maintenance
Critical to the enjoyment of the game of shuffleboard is the quality
of the playing surface. Good maintenance is the key to a smooth and
flawless surface that results in predictability in your shots. The three
essential steps in providing a good surface to your shuffleboard are
cleaning, polishing and waxing.
Jett Shuffleboard Cleaner has been specially formulated to cut through
waxy residue, leaving your shuffleboard squeaky clean. Use about once
a week. For the best playing conditions, polish the playing surface
with Jett Shuffleboard Silicone Polish after cleaning. Jett Shuffleboard
Cleaner is phosphate-free and biodegradable.
400228 $11.95
Jett Shuffleboard Silicone Polish increases the speed of the shuffleboard
and provides extra protection for the finish. For best results, clean the
playing surface with Jett Shuffleboard Cleaner before using polish.
Spray Shuffleboard Silicone Polish on shuffleboard surface and spread
evenly with a clean, dry cloth. For best results, allow the silicone polish
to stand overnight before buffing, as this allows greater time to cure the
silicone into a tough, protective shell
400229 $11.95
F.G. Bradley Fast Shuffleboard Wax is in flake form. As the rock slides
over the wax and playing surface, the speed is dependent on how
slippery the playing surface is. For best results with this wax, a clean,
slick playing surface is required. Regular use of Shuffleboard Cleaner
and Shuffleboard Silicone Polish is recommended. For use with table
shuffleboards only
400226 $12.95
F.G. Bradley Ultrafast Shuffleboard Wax is in bead form. As a result,
this wax actually rolls between the rock and the playing surface. This
means the playing surface does not need to be slippery, just clean. We
recommend cleaning the surface regularly with Shuffleboard Cleaner.
For use with table shuffleboards only.
400227 $12.95
90 See Page 36 for details on How to Order All products in this catalogue may be purchased through your Legion Branch
BRANCH OPERATIONS
Here is where we separate the real crib
players from the rest. Finding a crib
board without plastic pegs is normally
about as easy as scoring “19”. It is time
to recount that hand because you will
no longer have to heat up paper clips
to melt into the holes in your board to
remove those snapped off plastic pegs.
This board made in the traditional “29”
layout includes metal pegs in brass,
black and silver colouring. Three of each peg are included so
you have one spare in every colour. The board itself is made
from hardwood and is adorned with the Legion Badge.
300481 $14.95
91