Dust Chronicles Issue 4

Alternate Layout
Step 4
Measure the length of your walls a cut out a
floor to fit them. Glue the floors onto the lines
you drew to designate the second story and roof.
See how there is a low wall ‘lip’ for the roof on
the left side of the picture? That provides hard
cover. You don’t want to neglect that.
Once the glue on your walls and floors are dry,
you can see some of the ways you’ll be able to
align your buildings.
Step 5
At this point you can go straight to step 7 and
add paint. However, you can take a few minutes
to add some simple detail.
Using some of your cast off foam core, cut ¼”
window sills the width of your windows and
door frame. Glue on with wood/PVA glue.
how2: make buildings
dust chronicles issue 4
4