VERIFIED TECHNOLOGY - VERITEC AG, Anlagen

One system, many options
The thrust bottom feed boxes have been
designed as a complete system of type series.
We supply feed bunkers with discharge systems
for handling a wide variety of bulk materials /
substrates. The thrust bottom feed boxes have
been designed to allow them to be installed as
stand-alone and self-supporting units on even
concrete floors. This minimizes the construction
costs on site. The smaller thrust bottom feed boxes
are supplied as single units. The larger ones are supplied
as modules to be assembled on site.
The capacity of existing production and industrial plants is often
increased years later.
Capacity can be added to our thrust bottom dosing boxes
at low cost. This requires an existing feed system
of the type series V-SB and V-TB.
If allowed by the space conditions, a maximum
net bunker volume of 200m 3 is possible.
Mobile storage & dosing boxes
Another advantage is the combination of different bulk materials and substrates in
a single feed bunker. The type series V-TB with its two separate bunker volumes offers this
possibility. The discharge variants can be combined in many different ways. For example, the
material may be discharged only from bunker A or B in combination with weighing, or it is a
combination of both bunkers with the weighing system, which at the same time results in the
desired mixing of the bulk materials and substrates.
An optional control and weighing concept for operating the thrust bottom dosing box is available
upon request.
Type series:
V-TB100/100
V-TB100/84
V-TB100/67
V-TB100/50
V-TB100/34
V-TB100/17
Type series
V-SB100
V-SB84
V-SB67
V-SB50
V-SB34
V-SB17
(number = net volume m 3 )
V-TB84/84 V-TB67/67
V-TB84/67 V-TB67/50
V-TB84/50 V-TB67/34
V-TB84/34 V-TB67/17
V-TB84/17
V-TB50/50 V-TB34/34
V-TB50/34 V-TB34/17
V-TB50/17
V-TB17/17
(number / number = net volume m 3 + net
volume m 3 )
© copyright by VERITEC AG 14 www.veritec.ch