PAVING & CONCRETE PAINTS & COLOUR - Pascol Paints
PAVING & CONCRETE PAINTS & COLOUR - Pascol Paints
PAVING & CONCRETE PAINTS & COLOUR - Pascol Paints
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>PAVING</strong> & <strong>CONCRETE</strong> <strong>PAINTS</strong> & <strong>COLOUR</strong><br />
‘ easy for me ’<br />
Making it<br />
GREAT<br />
IDEAS FOR<br />
YOUR<br />
<strong>CONCRETE</strong><br />
SURFACES...
Your paving,<br />
your style...<br />
“it’s your choice”<br />
It’s never been easier to inject some life and personality into your paving and<br />
concrete surfaces. Whether it be a new fresh colour or a decorative finish, <strong>Pascol</strong><br />
has you covered from start to finish.<br />
Transform ordinary concrete into a luxurious floor that resembles marble or<br />
glazed stone with the <strong>Pascol</strong> family of coatings.<br />
Top Tip<br />
Not sure which product to use? Use the<br />
Product Application Guide on the back<br />
page to find out which products and<br />
surfaces are best suited for your project.<br />
Get Inspired: Whether you’re repainting<br />
the old driveway, laying down a new finish<br />
for the garage, spicing up a patio, pool<br />
decks or even decorating an interior slab,<br />
use this brochure to help you decide<br />
what’s best for your project.<br />
Surface preparation is key to the success<br />
of your project and provides extended<br />
coating life. Your surface must be clean,<br />
dry and free of dirt, grease, oil or other<br />
contaminants before applying any coating.<br />
Choose a Finish: Are you going to use<br />
paint, use a clear protective sealer or<br />
perhaps go for a more decorative finish?<br />
Whatever your choice <strong>Pascol</strong> has more<br />
than enough colours, sealers and finishes<br />
to suit your style.<br />
The BOND-LOK ADvANTAge<br />
Selected <strong>Pascol</strong> products contain<br />
technologies that work to maximize<br />
the bond between the floor coating<br />
and the concrete. This bond<br />
extents the life of your finish, giving<br />
you maximum durability. (See side<br />
of pack for details)
Paving <strong>Paints</strong><br />
Makes concrete look new<br />
Make your paving a focal point and enhance the style of your home with <strong>Pascol</strong> paving paint.<br />
Why stop there…transform your garage floors, highlight a pathway, show off your patio, enhance<br />
the pool deck and even breathe life into bare concrete floors.<br />
Heavy-duty ResiN foRmula<br />
availaBle iN 40 colouRs<br />
Heavy-duty uRetHaNe foRmula<br />
availaBle iN 40 colouRs<br />
PASCOL NON-SLIP PAvINg PAINT<br />
For concrete, masonry, steps, patios, paths and<br />
pool decks. Not suitable for drive-on surfaces such<br />
as driveways and garage floors.<br />
• Heavy-duty polymer-fibre matrix<br />
• Maximum slip resistance<br />
• Protects against UV rays & chemicals<br />
• Flat finish, high profile non-slip finish<br />
• Recoat in 2 hours<br />
• Suitable for interior and<br />
exterior use<br />
WateR Based<br />
availaBle iN 2 colouRs<br />
PASCOL 1-PART ePOXY PAvINg PAINT<br />
For concrete or masonry garage floors,<br />
driveways, paths, patio and interior floors.<br />
• Resists hot tyre pick-up<br />
• Protects against UV rays<br />
& chemicals<br />
• 2 hour recoat<br />
• Satin finish<br />
• Water based<br />
• Suitable for interior and<br />
exterior use<br />
PASCOL SOLID <strong>COLOUR</strong> PAvINg PAINT<br />
For concrete, brick, pavers, masonry, pool<br />
decks, driveways, paths and patios.<br />
• Beautifies old concrete<br />
• Protects against UV rays<br />
and chemicals<br />
• Low gloss finish<br />
• Recoat in 24 hours<br />
• Solvent based<br />
• Suitable for exterior use<br />
Top Tip<br />
• For additional slip resistance add <strong>Pascol</strong><br />
Anti-Skid Floor Texture Additive<br />
• Optional topcoat: use <strong>Pascol</strong> Multi-Purpose<br />
Sealer for added protection<br />
Iron Grey<br />
Sandstone<br />
All printed colours have been matched as close to the actual paint colour as the printing process will allow. Slight variation in shades may occur.<br />
<strong>Pascol</strong> 1-Part Epoxy & Solid Colour Paving Paint Colour Range<br />
Bleached Stone<br />
Hacienda Bloom<br />
Red Waratah<br />
Toasted Cinnamon<br />
Delightful White<br />
Mellow Suede<br />
Bungles<br />
Tile Red<br />
Weathered Oak<br />
Herbal Grey<br />
Waimea<br />
Copper Mine<br />
Sunwashed Brick<br />
Brush Tail<br />
Almond Green<br />
Smoky Emerald Soulful Green Frith<br />
Lazy River<br />
French Navy<br />
Cool Stone Light Grey New Concrete Weathered<br />
Concrete<br />
English Toffee Sugared Cream<br />
Beach Dawn Copper Clay<br />
Royal Dawn<br />
Caramelise Bear<br />
Tijuana Tan<br />
Balsam Branch Grey Spruce<br />
Blue Grey Sky<br />
Porch Blue Medieval Grey Cactus Garden Grayling<br />
Concrete Grey
Decorative Concrete Finishes<br />
Coloured stone look<br />
Turn ordinary concrete surfaces into an inviting space with <strong>Pascol</strong> Semi-<br />
Transparent Concrete Stain. The natural variations and textures of<br />
concrete, brick and pavers can be highlighted to give the appearance of<br />
natural coloured stone or slate. Alternatively be creative and invent your<br />
own style by mixing two finishes together.<br />
Looks like marble<br />
PASCOL eTChINg STAIN<br />
<strong>Pascol</strong> Etching Stain reacts with the minerals present in<br />
your concrete to provide a permanent decorative finish. It<br />
transforms the colour of your concrete to a contemporary,<br />
multi - toned rich marble appearance. For concrete pool<br />
decks, driveways, paths and patios.<br />
• Permanent multi-toned rich marbled appearance<br />
• Water based<br />
• Seal stain with <strong>Pascol</strong> Etching Stain Sealer<br />
PASCOL SemI-TRANSPAReNT CONCReTe STAIN<br />
Use on concrete, aggregate, brick, pavers, flagstone, pool decks,<br />
driveways, paths and patios. Not suitable for garage floors.<br />
• Durable acrylic-urethane formula<br />
• Protects and beautifies; provides<br />
a multi-coloured appearance<br />
WateR Based<br />
that looks like natural stone<br />
• Highlights natural variations and<br />
loW Gloss fiNisH<br />
texture of surface<br />
availaBle iN 29 colouRs<br />
• Recoat in 4 hours<br />
PASCOL eTChINg SeALeR<br />
Top Tip<br />
Optional topcoat: use <strong>Pascol</strong> Multi-<br />
Purpose Sealer for added protection<br />
For concrete pool decks, driveways, paths & patios.<br />
• Heavy-duty resin formula<br />
• Enhances & seals the colour & design of Etching<br />
Stain<br />
• Solvent based<br />
Coffee Tan<br />
eXteRioR use oNly<br />
availaBle iN 2 colouRs<br />
All printed colours have been matched as close to the actual paint colour as the printing process will allow. Slight variation in shades may occur.<br />
<strong>Pascol</strong> Semi-Transparent Concrete Stain Colour Range<br />
Lintel<br />
Saltillo Tile<br />
Votive<br />
August<br />
Tranquil Pool Blue Alloy<br />
Dark Nebula Aqua Stone<br />
Beach Stone<br />
APPLICATION<br />
<strong>Pascol</strong> Semi-Transparent Concrete Stain allows you to achieve a variety of different looks<br />
depending on the application used. Below is a reference on how the finish may appear<br />
when applying various numbers of coats or colours.<br />
NATURAL<br />
STONe FINISh<br />
1 coat<br />
Autumn Tint<br />
Red Rocks<br />
Urban Stone<br />
Olive Shade<br />
Grey Ash<br />
UNIFORm<br />
<strong>COLOUR</strong> FINISh<br />
For less transparent<br />
look a second coat<br />
can be applied<br />
2 coats<br />
Saffron Stem<br />
Quarry Red<br />
Kemp<br />
Ming Jade<br />
Melbourne Slate<br />
mULTI -<br />
<strong>COLOUR</strong> FINISh<br />
Randomly spray the<br />
second cover over<br />
the first<br />
2 colours<br />
Seville<br />
Outback Rock<br />
Dry River Bed<br />
Green Oxide<br />
Wood Charcoal<br />
Gold Leaf<br />
Gem Stone<br />
Mudbrick Flats<br />
Shaded Forest<br />
Cavern Pool<br />
Top Tip<br />
Try combining 2 or 3<br />
different colours for a truly<br />
unique look. Be creative<br />
and experiment to get<br />
just the look you want.<br />
Beach Stone Beach Stone Beach Stone<br />
& Outback Rock<br />
The final appearance depends on the concrete texture, porosity and how the stain is applied. The final stain colour will draw attention to any<br />
(lighter or darker) patterns in the prepared concrete.
Clear and waterproof sealers<br />
Protect & beautify<br />
Seal and protect your paving with quality sealers that will<br />
enhance its colour and ensure your efforts are long-lasting.<br />
Choose from our range of water based sealers for the<br />
ultimate finish.<br />
PASCOL mULTI-PURPOSe SeALeR<br />
For concrete, aggregate, masonry, brick, slate,<br />
garage floors, driveways, paths and patios.<br />
• Heavy-duty resin formula<br />
• Resists hot tyre pick-up<br />
• Resists petrol & oil stains<br />
• Recoat in 2 hours<br />
• Suitable for interior and exterior use<br />
Decorative Colour Flakes<br />
Create a designer look<br />
WateR Based<br />
Gloss fiNisH<br />
Top Tip<br />
Can be used over <strong>Pascol</strong><br />
Semi-Transparent Stain or<br />
1-Part Epoxy Paving paint<br />
<strong>Pascol</strong> Decorative Colour Flakes enhance<br />
the appearance of your concrete surface<br />
while masking any slight imperfections and<br />
deliver a polished and eye-catching look.<br />
PASCOL <strong>COLOUR</strong> FLAKeS<br />
• Use in conjunction with <strong>Pascol</strong> 1-Part Epoxy<br />
Paving Paint & Multi-Purpose Sealer<br />
• Over 100 colour combinations<br />
• Suitable for interior and exterior use<br />
Blue Mix Tan Mix Granite Mix<br />
PASCOL WeT LOOK SeALeR<br />
For pebblecrete, aggregate, concrete, brick, pavers, masonry,<br />
slate, flagstone, driveways, paths & patios.<br />
• Heavy-duty resin formula<br />
• Resists water, petrol & oil stains<br />
• Enhances surface appearance<br />
• Recoat in 2 hours<br />
• Suitable for interior and exterior use<br />
PASCOL NATURAL LOOK SeALeR<br />
For pebblecrete, exposed aggregate, concrete, brick, pavers,<br />
masonry, slate, mortar, flagstone, driveways and patios to<br />
enhance their natural beauty.<br />
• Penetrating silicone formula<br />
• Deep penetrating to form a protective barrier against water<br />
• Retains natural matt look of the surface<br />
• Recoat in 10 minutes (wet on wet)<br />
• Suitable for exterior use only<br />
Top Tip<br />
WateR Based<br />
Gloss fiNisH<br />
Avoid using this product on non-porous, sealed surfaces.<br />
To test, place a few drops of water on surface. If water sinks<br />
in, the surface is porous enough to use this finish. If water<br />
remains on the surface, do not use.<br />
WateR Based<br />
cleaR<br />
Top Tip<br />
Using Natural Look Sealer<br />
is the perfect solution to<br />
protect and keep paving<br />
looking clean and new.
Surface Preparation<br />
The key to a successful project<br />
To obtain the best results be sure to use <strong>Pascol</strong> Oil Stain Remover to lift stains without<br />
scrubbing or <strong>Pascol</strong> Bond Lok to clean, etch and degrease your concrete before you begin.<br />
Anti-Skid option<br />
PASCOL OIL STAIN RemOveR<br />
• Absorbs and lifts stains from<br />
concrete without scrubbing<br />
• Pour on and brush off<br />
• Cleans away stains and oil spots<br />
prior to painting or sealing<br />
PASCOL BOND•LOKTm • Cleans, degreases and etches<br />
concrete<br />
• Improves penetration & adhesion<br />
of paints & sealers<br />
• Provides maximum durability of<br />
top coat<br />
The BOND-LOK ADvANTAge<br />
Selected <strong>Pascol</strong> products contain<br />
technologies that work to maximize the<br />
bond between the floor coating and the<br />
concrete. This bond extents the life of your<br />
finish, giving you maximum durability.<br />
PASCOL ANTI-SKID FLOOR TeXTURe<br />
ADDITIve<br />
For steps, pool areas, floors & porches.<br />
Anti-Skid Floor Texture Additive will not<br />
change the colour, properties or performance<br />
of the coating. Particularly valuable in areas<br />
used by children and the elderly, or areas<br />
subject to wet conditions.<br />
• Add <strong>Pascol</strong> Anti-Skid Floor Texture Additive<br />
to increase traction and provide a skid<br />
resistant surface<br />
<strong>Pascol</strong> Products Usage Guide<br />
Concrete Surface Preparation<br />
CONCReTe<br />
hINTS & TIPS<br />
mASONRY<br />
gARAge FLOORS<br />
DRIveWAYS<br />
Surface Preparation: Correctly preparing the surface is the most important step when<br />
using <strong>Pascol</strong> Paving and Concrete <strong>Paints</strong>. This is an integral part of the process that<br />
will allow you to achieve an amazing, long-lasting finish. It is crucial that you adhere to<br />
all the detailed instructions on the label before you start the project.<br />
New Concrete: New concrete surfaces must be left to cure for at least four to six<br />
weeks before applying <strong>Pascol</strong> Paving and Concrete <strong>Paints</strong>.<br />
Previously Painted Concrete:<br />
• <strong>Pascol</strong> Paving and Concrete <strong>Paints</strong> can be applied to concrete surfaces that have<br />
been previously painted. Following the instructions provided on the label will<br />
guarantee your chosen surface is in a perfect state to be repainted.<br />
• All loose, peeling or flaking material must be removed before application. Sand<br />
gloss or semi-gloss enamel surfaces until gloss is removed.<br />
PAThS<br />
Bond-Lok * * * * * * * * * * * * * *<br />
Paving <strong>Paints</strong><br />
1-Part epoxy Paving Paint * * * * * * *<br />
Solid Colour Paving Paint * * * * * * * *<br />
Non-Slip Paving Paint * * * * * *<br />
Decorative Concrete Finishes<br />
Semi-Transparent<br />
Concrete Stain * * * * * * * * *<br />
etching Stain & Sealer * * * * *<br />
Clear & Waterproof Sealers<br />
multi - Purpose Sealer * * * * * * * * *<br />
Wet Look Sealer * * * * * * * * * *<br />
Natural Look Sealer * * * * * * * * * * *<br />
Application Information:<br />
• When painting the surface it is imperative not to apply too much at once. Adhere to<br />
the coverage level on the label to achieve the best result. Remember two coats of<br />
paint are better than one thick layer.<br />
• When applying paint it is best to work in section of 1 to 2 square metres at a time.<br />
• Depending on whether you are working in cooler or humid climates, allow the paint<br />
to dry for longer periods. In some cases allow for double the allocated drying time.<br />
• To guarantee the correct consistency of paint colour throughout the applying<br />
process, box and combine your required amount of paints that will be needed to<br />
complete the project.<br />
• Avoid painting driveways and paths during the heat of the day, as this may prevent<br />
penetration and adhesion of the paint.<br />
PATIOS<br />
INTeRIOR FLOORS<br />
BRICK<br />
POOL DeCKS<br />
PAveRS<br />
STePS<br />
AggRegATe<br />
FLAgSTONe<br />
SLATe<br />
PeBBLeCReTe<br />
mORTAR
Product Range<br />
PRePARATION<br />
PAvINg <strong>PAINTS</strong> & ADDITIveS<br />
DeCORATIve CONCReTe FINISheS<br />
CLeAR & WATeRPROOF SeALeRS<br />
PASCOL OIL STAIN RemOveR<br />
Absorbs & lifts stains from concrete without scrubbing<br />
PASCOL BOND-LOK<br />
Cleans, degreases and etches<br />
PASCOL 1-PART ePOXY PAvINg PAINT<br />
For concrete or masonry garage floors, driveways, paths,<br />
patio & interior floors<br />
PASCOL SOLID <strong>COLOUR</strong> PAvINg PAINT<br />
For concrete, brick, pavers, masonry, pool decks,<br />
driveways, paths & patios<br />
PASCOL NON-SLIP PAvINg PAINT<br />
For concrete,masonry, steps, patios, paths & pool decks<br />
PASCOL ANTI-SKID ADDITIve<br />
For steps, pool areas, floors & porches<br />
PASCOL <strong>COLOUR</strong> FLAKeS<br />
PASCOL SemI-TRANSPAReNT CONCReTe STAIN<br />
For concrete, aggregate, brick, pavers, flagstone, pool<br />
decks, driveways, paths & patios<br />
PASCOL eTChINg STAIN<br />
For concrete, pool decks, driveways, paths & patios<br />
PASCOL eTChINg STAIN SeALeR<br />
For concrete, pool decks, driveways, paths & patios<br />
PASCOL mULTI-PURPOSe SeALeR<br />
For concrete, aggregate, masontry, brick, slate, garage<br />
floors, driveways, paths and patios<br />
PASCOL WeT LOOK SeALeR<br />
For pebblecrete aggregate, concrete, brick, pavers, masonry,<br />
slate, flagstone, driveways, paths & patios<br />
PASCOL NATURAL LOOK SeALeR<br />
For pebblecrete, exposed aggregate, concrete, brick, pavers,<br />
masonry, slate, mortar, flagstone, driveways & patios<br />
For stockist information, product enquiries and technical advice please visit<br />
our website or call our Customer Service and Technical hotline.<br />
Phone 132 101<br />
www.pascol.com.au<br />
All printed colours have been matched as close to the actual paint colour as the printing<br />
process will allow. Slight variation in shades may occur. Photographic and printed<br />
images may not represent the true colour.<br />
<strong>Pascol</strong> is a registered trademark of Wattyl Australia Pty. Limited. ABN 40 000 035 914<br />
Code: CCPA019/PAS13<br />
09/11