re he 11 R 00 rs of ts - Graupner

DZ10092.EN

The Year 2010 at Graupner 

80th Anniversary with Air Show 

It is the year 2010, and Graupner looks back upon a history 

of 80 years. To properly celebrate this occasion, an 

anniversary air show was held on 12 September 2010. 

At the starting line were invited pilots of renown and 

rank, such as F4C World Champion Max Merckenschlager 

with his Stinson A1, Peter Michel with an MD 11 

Lufthansa-Cargo, Robert Otte with a Citation CJ3, along 

with Klaus Lenhart in a synchronous flight of an EXTRA 

330SC with Albert Winter and a model EXTRA 300. The 

scene of the action was the glider airport in Dettingen/ 

Teck. At the 15th Model Flight Day of MFG Dettingen, 

Graupner was able to celebrate its anniversary in flight 

on a great public stage. 

Heli Academy 2010 

Another edition of the Heli Academy was held at the end of September in the seminar rooms at GRAUPNER. The 

speakers Fred Annecke, Norbert Wybranietz, and Raimund Zimmermann provided an interesting and informative 

program on both seminar days and not only provided valuable assistance in building, programming, and flying-in, 

but also conveyed theoretical and practical expert knowledge in the area of model helicopters through attractively 

designed workshops and training flights with the GRAUPNER LOGO 10 Compact ARF. Everyone agreed that the “Heli 

Academy” had provided an important basis for entry into the fascinating world of RC helicopters. More information 

is available at www.heli-akademie.de. 

2 

Model Building Action Days at “Ravensburger Spieleland” 

In August, Graupner hosted the Model Building Action Days. The attractions included breathtaking air shows and 

exciting model car demonstrations, as well as car and boat racing for everyman. 

This was the third time that the Model Building Action Days had been held at the Adventure Playground of “Käpt’n 

Blaubär” and his crew. The model building experts at Graupner showed the best tricks in the air as well as on the 

water. The Spieleland Lake was the province of racing boats, cruisers, and beginners’ boats. The event field was 

transformed into an airport, and the ambitious pilots among the visitors to Spieleland were given a hands-on opportunity 

to try out teacher/pupil remote control systems More information is available at www.spieleland.de. 

Teck Cup 

The Teck Flying Cup is one of the greatest and most traditional 

of all model flying competitions. The simplified flight 

mission, as well as the challenges and attractive landscape 

of the flight field provide this event with its particular flair. 

This was the 48th time that this competition was held under 

the auspices of Graupner. Nearly 200 participants came to 

Teck on the first weekend of September to test their skills 

against the competition. The 49th Cup will be held on 10/11 

September 2011. Info at www.msc-kirchheim.de. 

New 2.4 GHz Transmission 

Technology HoTT 

On the occasion of the trade fair “Faßzination Modellbau” 

in Friedrichshafen, the new 2.4-GHz transmission 

technology HoTT was announced. The appropriate 

press representatives were invited to the press conference. 

The technical features of this technology were 

received with as much enthusiasm as the immediate 

availability of individual HoTT products. HoTT combines 

intelligent and reliable transmission in the 2.4-GHz 

band with extensive integrated telemetry functions. 

Yes, we can fly” – Rookie Flying to 

Recruit New Model Flyers 

“Yes, we can fly” was created so that young people 10 

and older who are interested in model sport flying could 

find some help getting started in the hobby. Together 

with the clubs MSC Kirchheim, MFG Dettingen, Wolf 

Hirth Kirchheim, and MFC Schlierbach, four different 

dates were offered during school vacation. That provided 

them with their first contact to model flying and 

to the club. The young people were able to control an 

electric glider in teacher/pupil mode. ROOKIE-S electric 

models were used; all equipped with teacher/pupil remote 

control systems. For the year 2011, a continuation 

of “Yes, we can fly” is planned. Interested clubs can 

contact info@graupner.de. 

< Andreas and Stefan Böhlen, specialists 

with long experience and members of the Swiss national 

team trust their competitive models the new 2.4 

GHz Transmission Technology HoTT System to. 

Ship Model Cup Bürgerseen, Whitsuntide 2010 

On the two Whitsuntide holidays, the now traditional “GRAUPNER Schiffsmodellcup” started with a new attendance 

record, thanks also to the simply perfect weather. The first event belonged to the racers. About 100 pilots started in 

various racing classes, providing exciting racing action for themselves and the interested spectators as they battled 

for the best places. On Sunday the spectators were treated to the popular show runs. From steamship to racing boat, 

the participants presented the complete range of ship model building at its finest. The employees of Graupner also 

presented and demonstrated new items and other highlights from recent years. 

Show Room with Factory Sales 

The Show Room has been restructured and now includes 

not only a continuous product exhibition in the 

areas of aircraft, boat, and car but also a factory sales 

area. Offered here are odd lots, seconds, and excess 

inventory from our current product range. 

Bargain hunter alert: We regularly provide information 

on the current offerings in our newsletter. The offerings 

can also be ordered online. We have set up a Factory 

Sales OnlineShop just for this purpose. Check it out at 

www.graupner.de. 

BalsaTec 

The Graupner subsidiary has been made independent and now operates as a sister company. BalsaTec is the partner 

for the balsa wood needs of industry. The various products were shown to an expert public at the Composite Europe 

trade fair in Essen. More information is available at www.balsatec.de. 

3 

A Retrospective

RC electric-powered model aircraft 

ROOKIE XS 

Order No. 92200 

Wingspan about 700 mm 


● Finished parts made of SOLIDPOR® 

hard foam 

● Electric motor N20 7.4 V preinstalled 

● Replacement propeller with clip hub 

included 

● All decorative elements are printed 

● Detailed assembly instructions 

included 

● RC receiver unit preinstalled 

● 2.4 GHz transmitter included 

● 4 mignon AA batteries for transmitter 

included 

● LiPo battery 2/250mAh 7.4 V 

included 

● Automatik LiPo charger included 

Specification 

Wingspan approx. 700 mm 

Overall length, approx. 520 mm 

All-up weight, approx. 100 g 

Total surface area, approx. 7,0 dm² 

Tailplane area 1,0 dm² 

Wing area 6,0 dm² 

Wing loading 14 g/dm² 

RC functions 

Rudder 

Elevators 

Engine rpms 

Complete accessories included in delivery 

Replacement parts 

Order No. Description 

92200.12 Replacement propeller for ROOKIE XS 

92200.20 Replacement battery 7.4V 250mAh for ROOKIE XS 

●●Graupner●Junior●Line●RC●electric● glider●model● 

●●Outstanding●glider●characteristics ●●Can●be●assembled●and●ready●to●fly● in●just●minutes 

●●Especially●sturdy●SOLIDPOR®● ready-to-fly●model 

●●Removable●cockpit●with●magnetic● closure● 

●●Separable●airfoil●with●CRP●strut ●●2.4●GHz●transmitter●with●LCD●● display 

●●Packing●carton●designed●as●gift● box 

4 5 

Power Models 

Model aircraft


TRAINER XS 

Order No. 92201 



● Finished parts made 

of SOLIDPOR® hard foam 

● Electric motor N20 

7.4 V preinstalled 

● Replacement propeller with 

clip hub included 

● All decorative elements are printed 


included 


● 2.4 GHz transmitter included 


included 


included 


Specification 



All-up weight, approx. 70 g 





RC functions 

Rudder 


Engine rpms 




92201.12 Replacement propeller for TRAINER XS 

92201.20 Replacement battery 7.4V 180 mAh for TRAINER XS 

●●Graupner●Junior●Line●RC●trainer ●●Outstanding●glider●characteristics ●●Can●be●assembled●and●ready●to●fly● in●just●minutes 


●●Ingenious,●crash-proof●clip-on●● propeller●hub 

●●Airfoil●can●be●unscrewed ●●2.4●GHz●transmitter●with●LCD●● display 

●●Packing●carton●designed●as●gift● box 

6 7 

Power Models 

Model aircraft


EXTRA 300 XS 




● Finished parts made 

of SOLIDPOR® 

hard foam 

● Electric motor N20 

7.4 V preinstalled 

● All decorative elements 

are printed 


included 


● 2.4-GHz transmitter included 


included 


included 


Specification 








RC functions 

Rudder 


Ailerons 

Engin rpms 




92202.12 Replacement propeller for EXTRA 300 XS 

92200.20 Replacement battery 7.4V 250mAh for ROOKIE XS 

●●Graupner●Junior●Line●RC●trainer ●●Outstanding●glider●characteristics ●●Can●be●assembled●and●ready●to●fly● in●just●minutes 


●●Ingenious●clip-on●propeller●hub ●●Removable●airfoil ●●2.4-GHz●transmitter●with●LCD●● display 

●●Suitable●for●ground●start●from● smooth●runways 

8 9 

Power Models 

Model aircraft

RC model glider 

AMIGO IV ARF 


Wingspan about 2000 mm 


● Almost ready to fly model (ARTF) 

● Wing and tail panels in ribbed 

design, full-balsa rudder 

● Fuselage in conventional wood 

design 

● Wings can be separated in the 

middle 

● Tail panel can be removed 

Specification 

Wingspan approx. 2000 mm 

Overall length, approx. 1115 mm 

All-up weight, approx. 1100 g 




Tailplane section Clark y 

Wing section NACA 4409 

Recommendation for the propulsion 

Motor Propeller Speed controller Spinner 

Order No. Order No. Order No. Order No. 

INLINE 470 7,4 V. 

6605 

1360.20.10 7221 1385.383 

Recommended accessories 

Type Order No. No. off 

MX-12 Graupner HoTT Computersystem 2.4 GHz 4754 1 

SERVO C 577 lose 4101.LOSE 1 

Pylon engine mount for electric motor 2910 1 



9546.1 Canopy for AMIGO IV 

9546.2 Fuselage for AMIGO IV 

9546.3 Wing pandels for AMIGO IV 

9546.4 Tailplane and fin for AMIGO IV 

9546.14 Decal sheet for AMIGO IV 

●●Short●building●time ●●Very●good●flight●performance●and● characteristics 

●●Good●thermic●sensitivity ●●2-color,●white/red●foil●already●● applied 

●●Cockpit●as●deep-drawn●part RC functions 

Rudder 


Speed controller 

The illustration shows the fully assembled model 

(if equipped with motor pylon) 

10 11 

Power Models 

Model aircraft


AMIGO IV 




● Kit with laser-cut wood parts 

● Ideal start for RC flight 

● Wing and tail panels in ribbed design 

● Trimmed nose and end moulding 

● Fuselage fully sheeted in 

balsa/plywood design 

Specification 


Overall length, approx. 1115 mm 





Tailplane section Clark y 



RC functions 

Rudder 


Speed controller (if equipped with motor pylon) 

Order no. 9547 ready for construction of the basic airframe. Not pack contents 


Motor Propeller Speed controller Spinner 

Order No. Order No. Order No. Order No. 

INLINE 470 7,4 V. 

6605 

1360.20.10 7221 1385.383 



MX-12 Graupner HoTT Computersystem 2.4 GHz 4754 1 

Servo C 577 Eco 4101 1 

Pylon engine mount for electric motor 2910 1 



9546.1 Canopy for AMIGO IV 

●●Cockpit●as●deep-drawn●part ●●Very●good●thermic●characteristics ●●Very●low●surface●area●loading ●●Can●be●converted●to●an●electric●● glider●with●a●electric●motor●pylon● 

retrofit 

12 13 

Power Models 

Model aircraft


ALPINA 3001 Champ PRO - ARC 





ALPINA 3001 Champ in Carbon- 

Champ design offers proven Alpina feeling 

without any compromises in performance 

or dynamics. The strengths of 

this model lie in its extraordinary thermic 

sensitivity as well as its speed, agility, 

and turning capabilities. Of course, 

it is a lot more mature than its little sister, 

but even aerobatically inclined pilots 

are sure to get their money‘s worth, 

thanks to the built-in „anti-stodgy factor.“ 

Contestline equipment 

● Weight-optimized GRP/CRP fuselage 

● Optimal force transmission via 

rectangular carbon connector in 

balsa-GRP full wing 

● Rudder flaps designed for 

competitive use 

● All rudders use the „elastic flap“ 

design 

● Minimal aileron gap 

● Cambered flaps with perfect sealing 

lip 

● Laser-cut RC wood set 

● High-quality small parts 

● Control levers for pendulum-type tailplane 

and fuselage connection completely 

installed, with resin applied 

● Weight-optimized pendulum-type 

rudder with interated tailplane lock 

● Colour-coordinated GFP cockpit 

canopy. 

Best. Nr. 41910 

● Precovered in two colours 

(white/red) 

● Design is printed directly on covering 

sheet and will not rub off 

Specification 



All-up weight, approx. from 2200 g 


Wing section TA-30-Strak 8,3% 

RC functions 


Rudder 

Ailerons 

Cambered flaps 

Tow coupling 

ALPINA 3001 Champ PRO - ARC Design Klassik 



Fig. shows design model 




41900.1 GRP Canopy for ALPINA 3001 CHAMP 

41900.2 Fuselage for ALPINA 3001 CHAMP PRO 

41900.15 Fuselage decal set for ALPINA 3001 CHAMP PRO 

41900.20 Wing joiner for ALPINA 3001 CHAMP PRO ARC 

41900.50 Wire set for ALPINA 3001 CHAMP PRO ARC 

41900.90 Wooden parts for ALPINA 3001 CHAMP PRO 

41910.3 Wing set for ALPINA 3001 CHAMP PRO ARF Classic Design 

41910.4 Tailplane for ALPINA 3001 CHAMP PRO ARF white/red 

41910.10 Rudder for ALPINA 3001 CHAMP ART, white 





41900.2 Fuselage for ALPINA 3001 CHAMP PRO 

41900.3 Wing set for ALPINA 3001 CHAMP ARC 

41900.4 Tailplane for ALPINA 3001 CHAMP ARC 

41900.10 Rudder for ALPINA 3001 CHAMP ARC 

41900.14 Decal sheet for ALPINA CHAMP PRO 



41900.90 Wooden parts for ALPINA 3001 CHAMP PRO 



Servo DES 448 BB MG 7914 4 

Digital-Servo DES 678 BB, MG 7943 2 

●●4-flap●model ●●Competitive●design ●●Airfoils●and●tailplane●ready●for●● construction●of●the●basic●airframe 

●●Short●construction●time ●●Glider●and●electric●version●available 14 15 

Power Models 

Model aircraft

RC electric model aircraft 

ALPINA 3001 Champ Electro - ARC 





ALPINA 3001 Champ in Carbon- 

Champ design offers proven Alpina 

feeling without any compromises in 

performance or dynamics. The 

strengths of this model lie in its extraordinary 

thermic sensitivity, but its 

speed, agility, and turning capabilities 

also offer lots of fun. Thanks to 

perfectly attuned lever conditions, it 

is also possible to use powerful motors 

with hardly any increase in 

weight compared to the glider version. 

Contestline equipment 

● Weight-optimized GRP/CRP 

fuselage 

● Optimal force transmission via 

rectangular carbon connector in 

balsa-GRP full wing 

● Rudder flaps designed for 

competitive use 

● All rudders use the „elastic flap“ 

design 

● Minimal aileron gap 

● Cambered flaps with perfect 

sealing lip 

● Laser-cut RC wood set 

● High-quality small parts 

● Weight-optimized pendulum-type 

rudder with integrated tailplane 

lock 

● Control levers and horizontal 

stabiliser connections completely 

installed, with resin applied 

● Colour-coordinated GFP cockpit 

canopy 


● Precovered in two colours 

(white/red) 

● Design is printed directly on covering 

sheet and will not rub off 

Specification 



All-up weight, approx. from 2450 g 


Wing section TA-30-Strak 8,3% 


Motor Flight battery Propeller Speed controls Spinner 

Order No. Order No. Order No. Order No. Order No. 

COMPACT 540 12 

V 

7720 

7657.3 1336.40.25 7237 6042.5 

ALPINA 3001 Champ Elektro - ARF Design Klassik 






41900.3 Wing set for ALPINA 3001 CHAMP ARC 

41900.4 Tailplane for ALPINA 3001 CHAMP ARC 

41900.10 Rudder for ALPINA 3001 CHAMP ARC 



41950.2 Fuselage for ALPINA 3001 CHAMP ELEKTRO 

41950.14 Decal sheet for ALPINA 3001 CHAMP ELEKTRO 

41950.90 Wooden parts for ALPINA 3001 CHAMP ELEKTRO 







41950.2 Fuselage for ALPINA 3001 CHAMP ELEKTRO 

41950.15 Decal sheet for ALPINA 3001 CHAMP ELEKTRO for fuselage 

41950.90 Wooden parts for ALPINA 3001 CHAMP ELEKTRO 

41960.3 Wing set for ALPINA 3001 CHAMP ELEKTRO ART white/blue 

41960.4 Tailplane for ALPINA 3001 CHAMP ELEKTRO ARF white/blue 



Servo DES 448 BB MG 7914 4 


●●4-flap●model ●●Competition●design ●●Airfoils●and●tailplane●ready●for●● construction●of●the●basic●airframe 

●●Short●construction●time ●●Glider●and●electric●version●available 16 17 

RC functions 


Rudder 

Ailerons 

Cambered flaps 

Tow coupling 

Motor 


Power Models 

Model aircraft


CHIP 

Order. No. 4564 

Wingspan approx. 1050 mm 

Best. Nr. 4564 

● Kit made of Graupner SOLIDPOR® 

high-density foam 

● Airfoil with CRP 

strut 

● CNC-machined 

cockpit canopy 

● Brushless-Motor 

INLINE 400 11.1 V 

included 

● CAM FOLDING 

PROP 16 x 8 cm 

included 

● Generous decorative decal 

sheet included 

● Detailed instructions with photos 

of the construction stages 

Order No. 4564.100 

● Finished parts of Graupner 

SOLIDPOR® hard foam 

● Airfoil with bonded CRP strut 

● CNC-machined carbon-look canopy 

● Brushless motor INLINE 400 11.1V 

installed 

● CAM FOLDING PROP 16x8 cm 

installed and ready to go 

● High-quality DES 261 BB servos 

installed 

● All decal elements affixed 

Specification 


Overall length approx. 810 mm 





Tailplane section NACA 009 

Wing section RG 14 mod. 


RC functions 

Rudder 


Engine rpms 

Brushless motor INLINE 400 11.1V and CAM FOLDING PROP 

16x8cm installed and ready to operate under order no. 

4564.100 and included under order no. 4564 


CHIP ARTF 




Pièces détachées 

Réf. N° Description 

6297.1 Canopy for CHIP and TERRY S 

6297.2 Fuselage for CHIP and TERRY S 

6297.3 Wing for CHIP and TERRY S 

6297.4 Tailplane and fin for CHIP 

4564.14 Decal sheet CHIP 

18 19 




MX-12 Graupner HoTT Computersystem 2,4 GHz 4754 1 

LiPo battery V-MAXX30C 3/850 11.1V BEC 7621.3BEC 1 

Servo DES 261 BB 7903 2 

COMPACT FLY 15 BEC 6-16,8V BEC connector 7220 1 



MX-12 Graupner HoTT Computersystem 2,4 GHz 4754 1 

LiPo battery V-MAXX30C 3/850 11.1V BEC 7621.3BEC 1 

COMPACT FLY 15 BEC 6-16,8V BEC connector 7220 1 

●●Graupner●model●„Made●in●● Germany“ 

●●Mini-sized●Hotline●model ●●Very●high●speed●range ●●Removable●airfoil●and●tailplane ●●Carton●can●be●used●as●transport● box 

Power Models 

Model aircraft

RC electric aerobatic model 

LEKI EXTRA 330SC 




● Aerobatic model made of Graupner 

SOLIDPOR® hard foam parts 

● Includes Graupner COMPACT 400Z 

BRUSHLESS motor, including 

precision spinner Ø 50 mm and 

E-PROP 30x15cm 

● Vacuum-molded and milled canopy 

● High-strength ABS parts such as 

motor mount, undercarriage mounts, 

and airfoil mounting elements are 

included in the package 

● One-piece airfoil with CFK strut 

● Decorative decal sheet for 

GRAUPNER version and LEKI 

original version included 

● Detailled assembly instruction with 

photos of the construction stages 

Specification 








Wing section NACA 0015 


RC functions 

Rudder / tail wheel 


Ailerons 

Engine rpms 

The illustration shows the fully assembled model. 

Simple battery change with snap-close cover. 



MX-16 COMPUTERSYSTEM 2,4 GHz 4755 1 

DES 476 BB digital servo 7915 4 

COMPACT CONTROL 45 BEC G3.5 connector 7224 1 

LiPo battery V-MAXX45C 3/2200 11.1V G3.5 9722.3 1 



9545.1 Canopy for LEKI EXTRA 330SC 

9545.14 Decal sheet for LEKI EXTRA 330SC 

9545.2 Fuselage half shellfor LEKI EXTRA 330SC 

9545.3 Wing for LEKI EXTRA 330SC 

9545.4 Tailplane and fin for LEKI EXTRA 330SC 

9545.5 ABS Small pieces for LEKI EXTRA 330SC 

9545.8 Spats for LEKI EXTRA 330SC 

●●Excellent●aerobatic●characteristics ●●Semi-scale●model●with●wheel●● covers 

●●Pack●of●hobby●building●materials● „Made●in●Germany“ 

●●Excellent●motor●performance●for● vertical●climbs 

Includes Graupner COMPACT 400Z 

BRUSHLESS motor, including precision 

spinner Ø 50 mm and E-PROP 30x15cm 

20 21 

Power Models 

Model aircraft


Electric ROOKIE QR 




● Finished parts of Graupner 

SOLIDPOR® hard foam 

● SOLIDPOR® hard foam parts 

ready for installation of the 

ailerons 

● Separable airfoil with CRP strut 

● Removable cockpit of blue 

SOLIDPOR® 

● Brushless motor set COMPACT 300 

included 

● CAM SLOWFLY PROP 16x8cm 

included 

● Generous decorative decal sheet 

included 


● Complete package includes LiPo 

battery and LiPo charger 


● 4 C231 servos built in 

● Brushless Motorset COMPACT 300 

with CAM SLOWFLY PROP 16x8cm 

preinstalled 

Specification 








Wing section HQ 3/12 


RC functions 

Rudder 


Ailerons 

Engine rpms 


Electric ROOKIE QR ARTF 



Order No. 4239.100 LiPo battery 3 / 2500 and Li-Po charger in the pack 

Brushless Motorset COMPACT 300 included in order no. 4239 

Under order no. 4239.100 it is installed and ready to go 





Servo C 231 5109.LOSE 2 

LiPo battery 20C 3/2500 11.1V G3.5 7633.3 1 







4218.1 Canopy 

4239.2 Ready-formed fuselage with fin and rods 

4239.3 Wing set for HI FLY 

4218.4 Elevator 

4218.5 ABS small parts 

4239.14 Decal sheet for ELEKTRO ROOKIE QR 

4218.20 Wing joiner, CFRP 

●●Pack●of●hobby●building●materials● „Made●in●Germany“ 

●●Ideal●beginner‘s●model ●●Especially●sturdy●design ●●Can●be●retrofitted●with●ailerons ●●Carton●can●be●used●as●transport● box 


● Complete package includes LiPo 

battery and LiPo charger 


● 4 C231 servos built in 

● Brushless Motorset COMPACT 300 

with CAM SLOWFLY PROP 16x8cm 

preinstalled 

22 23 

Power Models 

Model aircraft

RC aerobatic electric model 

TAXI SPORT II 




● ARTF model (almost ready to fly) 

● Control of rudder and elevators via 

DSS system 

● Complete balsa/plywood design 

● Ideal for switching to aileron- 

controlled models 

● Fuselage, wings, and tailplane 

pre-covered with multicolored foil 

● Wheels, small parts, and 

accessories for rudder linkage 

● Parts included for electric installation 

Order No. 9586.M 

● With OS MAX G 55 motor, shock 

absorbers, and propeller 

Specification 


Hull length, approx. 1190 mm 





Order No. 9586.M 


RC functions 

Rudder linked to tailwheel 


Ailerons 

Speed controller 



Motor Battery Controller Propeller Silencer 

Order No. Order No. Order No. Order No. Order No. 

GRAUPNER COM- 

PACT 465Z 14,8V 

7772 

9733.3 7224 1318.40.25 

OS MAX 46 LA 

1318.28.15 1885.33 

1888 

1870.72 

OS MAX 46 AX 

1318.28.15 1809.33 

2701 

1871.72 



MX-12 Graupner HoTT Computersystem 2.4GHz 4754 1 

Servo DES 807 BB, MG 7953 4 

Servo C 5077 Eco 4103 1 



9586.1 Cockpit vitrification for TAXI SPORT II 

9586.2 Fuselage for TAXI SPORT II 

9586.3 Wing panels for TAXI SPORT II 

9586.4 Tailplane and fin for TAXI SPORT II 

9586.5 Landing gear for TAXI SPORT II 

9586.7 GRP cowl pour TAXI SPORT II 

9586.8 Wheel spats for TAXI SPORT II 

9586.14 Decal sheet for TAXI SPORT II 

Installation of the electric engine 

●●ARTF(Almost●Ready●to●Fly) ●●DSS-System●(Direct●Steering● System) 

●●Aerobatic●trainer ●●Wings●removable●for●transport Installation of the gas motor 

24 25 

POWER MODELS 

Model aircraft

RC electric model 

CESSNA ® 172 S 




● Almost ready to fly (ARTF) model 

● Conventional wood construction 

● Fuselage, wing parts, and tailplane 

pre-covered 

● Wheels, small parts, and 

accessories for rudder linkage 

RC functions 

Rudder 


Ailerons 

Airbrakes 

Engine throttle 

Specification 


Overall length, approx. 1800 mm 


Total surface area, approx. 46 dm² 







Servo DS 5391 BB, MG, lose 5166.LOSE 1 

Servo C 5077 BB, lose 4103.LOSE 7 

MC-22 HoTT Computersystem 4759 1 



9595.1 Canopy 

9595.2 Fuselage 

9595.3 Wings 

9595.4 Elevator 

9595.5 Train 

9595.7 Motor cowl 

9595.10 Rudder 

9595.14 Decal sheet 

9595.20 Joiner tube 

Cessna® emblems, logos and body designs are trademarks 

of Textron Innovation Inc. and are used under license by 

Graupner GmbH & Co. KG 


Motor Propeller Silencer 

Order No. Order No. Order No. 

OS MAX FS A-56 inclusive 

silencer 

2729 

1318.30.20 

OS MAX 46 AX 

2701 

1318.28.15 2715.33 

Marker lights installed on the wingtips 

The original 

●●Four-seater●sports●aircraft ●●Ideal●training●aircraft The model 

●●GRP●engine●bonnet●and●wheel●● covers 

●●GRP●(glass-fiber-reinforced●plastic) ●●Wings●removable●for●transport 26 27 

Power Models 

Model aircraft

RC electric model 

JODEL ROBIN DR 400/180 




● Almost-ready-to-fly (ARTF) model 

● Conventional wood construction 

● Fuselage, wings halves, and tailplane 

pre-covered with foil 

● Small parts and accessories for 

rudder linkage 

● Wing halves, tailplane halves, and 

vertical stabilisers can be removed 

for transport 

RC functions 

Rudder 


Ailerons 

Airbrakes 

Bow landing gear 

Engine throttle 

F-tow coupling 

Specification 





Wing area 84 dm² 

Tailplane section 18,4 



Motor Drive battery Propeller Series connection 

cable 

Silencer Speed controller 

Order No. Order No. Order No. Order No. Order No. Order No. 

GRAUPNER 

COMPACT 740Z 

37V 

7780 

9752.5 1328.45.25 2970.R 7208 

Petrol engine G 

26 

1903 

1318.45.25 1903.33 

OS MAX 

FS-200S 

2728 

1318.45.25 2728.33 

For installation of the RC components and assembly of the 

wing panels, a generous opening is provided in the fuselage. 



Servo DS 5491 BB, MG 5165 8 

Servo DS 8417 BB, MG 5152 1 

MC-22 HoTT Computersystem 4759 1 



9561.1 Canopy for JODEL 

9561.2 Fuselage for JODEL 

9561.3 Wing for JODEL 

9561.4 Tailplane and fin for JODEL 

9561.5 Landing gear for JODEL 

9561.7 GRP cowl for JODEL 

9561.8 GRP wheel spats forJODEL 

9561.14 Decal sheet for JODEL 

The original 

Four-seater●sports●aircraft 

Ideal●for●F-tow 

The model 

●●ARTF●(almost●ready●to●fly) ●●GRP●(glass-fiber-reinforced●plastic) ●●Engine●bonnet●and●wheel●covers ●●Scale●1:4 28 29 

Power Models 

Model aircraft

RC electric model helicopter 

PICO STAR 1 GYRO RED 


Rotor-Ø 112 mm 



With the built-in gyro, the Pico Star 1 

has great independent flying stability 

and can be controlled perfectly after 

just a short learning phase. Everything 

you need is included in delivery, so the 

Pico Star 1 is ready to fly as soon as 

you have charged the LiPo battery. 

● Free flying indoor helicopter model 

with gyro 

● Pre-assembled and ready to fly 

● Infrared remote control system with 

three functions 

● The model gets its power supply 

from an installed lithium-ion-polymer 

(LiPo) battery 

● Power supply to 

the transmitter via 

six type »mignon AA« dry-cell 

batteries included in delivery 

● Model should be charged via USB 

connection to a PC or, alternatively, 

via the transmitter 

● With LED lighting 

RC functions 

Pitch axis 

Yaw 

Climb/drop 

Specification 

Fuselage width (excl. Rotor) 24 mm 

Length excl. rotor 133 mm 

Height, approx. 65 mm 


Rotor diameter 112 mm 

Drive battery is charged via the transmitter 

PICO STAR 1 GYRO BLACK 


Rotor-Ø 112 mm 

Complete scope of delivery with transmitter and accessories 



3426 Power battery (4 pcs) 

With●integrated●LED●lights 



Energy Set Charger and batteries AA (12pcs.) 90130 1 

Der●Pico●Star●1●the●smallest●helicopter●model●in●our●product●range.● 

Thanks●to●the●built-in●gyro●system,●the● 

ultralight●helicopter●model●has●great● 

independent●flying●stability●and●can● 

be●flown●even●in●very●small●spaces.●2● 

very●bright●LEDs●provide●support●for● 

night●flight●and●also●make●for●a●great● 

show.●The●soft,●short●rotor●blades●are● 

extremely●sturdy●and●durable.●After● 

just●a●short●learning●phase,●the●model● 

can●be●controlled●reliably●via●3●functions.●Flight●time●with●one●battery● 

charge●is●about●3-5●minutes,●and●the● 

integrated●battery●can●then●be●recharged●with●no●problem●via●the●included● 

USB●cable●to●a●PC●or●notebook,●or●via● 

the●transmitter●charger●cable. 

30 31 

Helicopter Models 

Model aircraft


NANO FIGHTER GYRO KHAKI 


Rotor-Ø 185 mm 



Thanks to the built-in gyro system, the 

super-light Nano Fighter has extremely 

good independent flying stability and 

can be controlled perfectly after just a 

short learning phase. The delivery 

includes everything you need, so the 

Nano Fighter is ready to fly as soon as 

the LiPo battery is charged. 

● Free-flying indoor helicopter model 

with gyro 

● Assembled and ready to fly 






● Power supply to the transmitter via 

six type »mignon AA« dry-cell 

batteries included in delivery 

● Model should be charged via the 

USB connection to the PC, or 

alternatively to the transmitter 

● With LED lights 

RC functions 

Roll 

Pitch 

Climb/drop 

Specification 

Fuselage width (excl. Rotor) 100 mm 




Rotor diameter 185 mm 

94200 Nano Fighter in khaki 

The flight battery is charged via USB cable to the PC 




NANO FIGHTER GYRO GREY/SILVER 



Complete scope of delivery with transmitter and 

accessories 

94201 Nano Fighter in grey/silver 




With integrated LED lights 

Thanks●to●the●built-in●gyro●system,●the● 

super-light●Nano●Fighter●has●● 

extremely●good●independent●flying● 

stability●and●can●be●flown●even●in●the● 

tightest●spaces.●The●aggressive●● 

appearance●of●the●military●variant●of● 

the●Nano●Star●series●is●underscored● 

even●further●in●night●flight●by●the●2● 

very●bright●LEDs.●The●soft,●short●rotor● 

blades●are●extremely●sturdy●and●● 

long-lived.●After●just●a●short●learning● 

phase,●the●model●can●be●controlled● 

reliably●via●three●functions.●Flight●time● 

with●a●single●battery●charge●is●about● 

4-6●minutes,●and●recharging●is●● 

possible●with●no●problem●using●the● 

provided●USB●cable●via●PC,●● 

notebook,●or●the●integrated●● 

transmitter●charger●cable. 

32 33 


Model aircraft


NANO STAR 2 GYRO 




● Free-flying indoor helicopter model 

with gyro 

● Assembled and ready to fly 






● Power supply to the transmitter via 

six type »mignon AA« dry-cell batteries 

included in delivery 

● Model should be charged via the 

USB connector to the PC, or alternatively 

to the transmitter 

Specification 






RC functions 

Pitch 

Yaw 

Up/down 

Available in a choice of yellow or red 

R/C systems 

(Included in delivery), infrared, 3 functions 







4409.3 rotor parts for NANO STAR 2 

4409.4 Rotor blades for NANO STAR 2 

With●integrated●LED●lights 

●●The●extremely●light●model●offers● great●stability●for●operation●indoors● 

even●in●small●spaces 

●●The●soft,●short●rotor●blades●are● very●sturdy 

34 35 


●●Outstanding●flight●stability●thanks● to●the●integrated●gyro;●can●be●mastered●after●just●a●short●learning● 

phase 

●●Control●via●three●functions ●●Flight●time●with●one●battery●charge● is●about●4-6●minutes 

●●The●flight●battery●is●charged●via● USB●cable●to●the●PC,●notebook,●or● 

via●the●integrated●transmitter●charger●cable 

The flight battery is charged via USB cable to 

the PC 

Model aircraft


micro ECUREUIL® 460 


Rotor-Ø about 460 mm 


● Realistic, free flying indoor helicopter 

model 

● Assembled, ready to fly, and already 

flown in 

● 2.4-GHz radio remote control with 

four functions included in delivery 

● Built-in lighting: flashing light, land 

spotlight 

● Battery low voltage warning by blinking 

blue light 

● Model power supply via rechargeable 

lithium ion polymer battery (LiPo 

battery), included in delivery 

● LiPo automatic charger for 12-V operation 

and power supply unit for 220 

V power operation also included in 

delivery 

● Transmitter power supply via four mignon 

type AA dry cells, included 

● Transmitter operation with rechargeable 

batteries is possible, a charging 

jack is already installed in the transmitter 

Specification 






RC functions 

Roll 

Pitch axis 

Yaw 

Rotor thrust (rpms) 

2,4 GHz 




4490.09 Mains adaptor 

4484.01 Main chassis and engins 

4484.02 Small parts and bearing 

4484.03 Rotor parts 

4484.04 Rotor blades 

4484.05 Swashplate and linkage 

4484.07 LiPo battery 3/700 

4484.08 LiPo charger 

4484.10 Top rotor head and shaft 

4484.11 Battery warning, 3 cells 

●●Ecureuil ® ●AS●350●is●a●6-seater●multipurpose●helicopter●from●Aerospatiale●(now●Eurocopter) 

●●Adds●a●larger●model●to●the●proven● »micro●47●indoor«●system 

●●Outstanding●flight●stability,●can●be● mastered●after●just●a●short●learning● 

phase 

36 37 

Set includes 


●●Two●coaxially●arranged,●counter-ro tating●rotors,●so●no●rear●rotor●is●required 

The●model●was●created●with●the● 

friendly●permission●and●support●of● 

EUROCOPTER●(an●EADS●Company) 

Model aircraft

RC racing boat 

BAZILLUS 


Hull length about 230 mm 


● Ready-to-Run (RTR) model 

● Completely assembled and ready-torun 

Micro racing boat 

● 2.4 GHz remote control with mit frequency 

hopping system 

● Built-in, water-cooled SPEED 320 

motor with hydro drive 

● Turn fins on both sides for better behaviour 

in curves 

● Double cockpit canopy for a better 

seal 

● Applied decals 

● Model is delivered in three assorted 

colours 

● Delivery includes: instructions in German, 

English, and French, completely 

assembled model, transmitter, 

drive battery, charger, transmitter 

battery, ship stand, small parts 

2,4 GHz FHSS 

Technologie 



Prime battery, block9V 98865 1 

●●RTR●(Ready●To●Run) ●●The●BAZILLUS●is●the●Micro●racing● boat●for●fast●fun●on●the●water 

●●The●handy●size●means●it●can●be●ta ken●anywhere●with●no●problem 

●●After●the●drive●battery●is●charged● and●the●transmitter●battery●is●in● 

place,●the●model●is●ready●to●run 

●●Thanks●to●the●modern●2.4-GHz● technology,●it●is●even●possible●to● 

run●several●models●in●parallel 

●●The●model●is●delivered●to●dealers●in● an●assortment●of●colours:●white,● 

red,●and●yellow 

Specification 

Overall length, approx. 

Hull length, approx. 

Beam, approx. 

Total displacement 

270 mm 

230 mm 

70 mm 

172 g 

Set contents (drive battery not shown) 

RC functions 

Rudder 

Forward with proportional control 



8609.5 Rudder system and turn fin 

8609.6 Boat propeller 

38 39 

RTR 

RACING BOATS 

Boat models

RC Rescue boat 

MULTI JET BOAT 




● New kit developed using state-ofthe-art 

design methods on a 3D- 

CAD system 

● Ideal model for model builders with 

little basic knowledge of ship model 

building 

● Hull, deck, and superstructure of vacuum-moulded 

ABS, CNC-machined 

● Many superstructure, deck parts, railings, 

and other parts of laser-cut 

ABS 

● Set of fittings included, consisting of 

injection moulded parts, such as the 

mast, aerials, lights, tyfon, bollard, 

anchor, lifesavers, and lip 

● Extensive set of multilingual decals 

can be used for various designs. 

This enables the model builders to 

select exactly the designs they want. 

● Included in delivery: vacuum-moulded 

ABS parts for hull, decks, superstructure, 

covering, and life raft, laser-cut 

wood parts for interior 

braces, railings, and other small 

parts, complete set of fittings, two jet 

drives, shaft couplings, parts for rudder 

linkage, wires, hook-and-loop 

strip, small parts 

RC functions 

Rudder 

Speed control 

Operation of reversing flap 

Special functions such as lighting and 

sound module as desired 

Specification 

Scale 1:25 


Beam, approx. 225 mm 

Overall height approx. 325 mm 


The illustrations show the prototype model equipped with accessories 



2155.2 Hull, deck and cover 

2155.3 Superstructure 



X-408 COMPUTERSYSTEM 40 MHz 4729 1 

SPEED CONTROLLER PICO 60 7176 1 

SERVO C 577 lose 4101.LOSE 1 

Receiver battery 4NH-2000 RX RTU JR plug 2498.4 1 

SPEED 600 RACE 7,2 V 6370 2 

GM Power Pack 36006N-3600 7,2V G2 2490.6 2 

Condensor, large 3588 1 

Highly flexible copper litzwire 3389 1 

Parallel cable G2 3061 1 

Graupner gold contact 2989 1 

The model 

●●The●MULTI-JET●BOAT●is●based●on● a●Swedish●pilot●boat,●which●is●also● 

used●as●a●sea●rescue●boat.●In●developing●the●model,●however,●the●original●was●used●only●as●a●source●of● 

ideas,●so●that●the●model●builders● 

can●implement●their●own●ideas●in● 

their●models.●As●a●result,●the●model● 

can●be●done●as●many●kinds●of●control●services●(coast●guard,●police,●et● 

cetera).●This●is●also●facilitated●by● 

the●multilingual●decal●sheet. 

●●The●CNC-machined●vacuum-moul ded●ABS●parts●make●it●suitable●even●for●less●practiced●model●builders. 

●●The●railings●are●made●of●2mm●la ser-cut●ABS,●saving●you●the●trouble●of●soldering●them●together●from●wires. 

●●The●windows●come●standard●as● complete●decals,●the●decal●sheet● 

also●includes●some●separate●decals● 

of●only●the●window●frames. 

●●The●dual●jet●drive●provides●impres sive●operating●performance. 

●●The●model●has●adequate●space●for● installation●of●lighting●(order●no.● 

2381)●or●a●sound●module●(order●no.● 

2382.S). 

40 41 41 

Motor Boats 

Boat models

RC sailing yachts 

Racing MICRO MAGIC RTR 




● Almost-Ready-to-Run (ARTR) Model 

● The racing MICRO MAGIC RTR was 

designed to reflect developments on 

the MICRO MAGIC racing scene, 

and in its standard form constitutes a 

version intended for ambitious regatta 

work 

● Hull, deck, hatch cover, and keel 

mast socket are made of vacuummmoulded 

glass-fibre-reinforced plastic 

and are pre-assembled and bonded 

● All RC components are already installed 

in the hull 

● The 40 MHz (FM) hand transmitter 

comes with joysticks optimised for 

sailing 

● The rig is pre-assembled to such a 

degree that it can be set up quickly 

● The sails have to be mounted, because 

they are packed separately to 

avoid crinkling 

● The keel fin and rudder are injectionmoulded 

in glass-fibre reinforced 

plastic for outstanding stiffness 

● The slightly reduced areas and slim 

profile of the fin and rudder result in 

reduced drag 

● Factory-made, pre-sewn sail suit of 

white, water-repellent, lightweight sail 

fabric 

● Lightweight but stable rig is made of 

CFRP tubing. The boat features a 

one-piece mast in order to obtain a 

strong rig without the need for a 

spreader 

● The rig consists of the newly developed 

high-quality plastic fittings that 

are also used in the kit 

● The boat has a pre-installed jib trimming 

servo, so that you can fine-tune 

the sail trim while the boat is running 

● The whole sail adjustment system is 

low in friction thanks to the double 

control arm and dual return pulleys 

● The high degree of pre-assembly 

means you can finish the model 

quickly 

● Pre-painted hull, keel fin, and rudder 

with factory-applied decals 

● Set contents: vacuum-moulded ABS 

hull, deck, hatch, and two-part keel 

mast socket, laser-cut wooden internal 

fittings and boatstand, glass-fibre 

reinforced plastic rudder and keel fin, 

cast keel ballast mounted on the keel 

fin, various injection-moulded plastic 

parts, carbon fibre tubing for mast 

and booms, ready-made sail suit, 

polyester cord, small items, decal 

sheet, instructions in German, English 

and French 

Specification 


Beam, approx. 180 mm 

Overall height approx. 980 mm 

Sail area (cm2) 1450 cm² 


The illustrations show the assembled model. 

www.micromagic.info 

42 43 

RC functions 

Rudder 

Sail control 

Jib sheet trim 



Power battery (4 pcs) 3426 3 



2014.2 Keel fin 

2014.3 Rudder 

2014.4 Keel ballast 

●●ARTR●(Almost●Ready●To●Run) ●●With●the●MICRO●MAGIC●RTR,●the● familiar●racing●MICRO●MAGIC●is● 

also●available●as●a●pre-assembled● 

model 

●●In●spite●of●its●extraordinarilly●small● size,●the●racing●MICRO●MAGIC●is●a● 

high-quality●regatta●model●yacht● 

with●all●the●usual●control●functions 

●●The●RTR●variant●meets●the●techni cal●requirements●of●the●German●regatta●scene 

●●The●racing●MICRO●MAGIC●is●suita ble●for●light●to●moderate●winds 

●●The●compact●size●of●the●racing●MI- CRO●MAGIC●makes●it●easy●to● 

transport●and●the●the●ideal●choice● 

for●use●on●holiday 

●●For●tips,●more●information,●and●re gatta●dates●for●the●racing●MICRO●MAGIC,●please●visit●www.micromagic.info 

RC sailing yaChts 

Boat models

RC electric touring cars 

PORSCHE 911 GT2 

Order No. 92000 

Scale 1:16 





The new Junior Line Scale-Cars on a 

scale of 1:16 are the ideal first RC car. 

The vehicles are easy to master, extremely 

robust, and, thanks to the turbo 

function, reach speed of up to 11 km/h. 

That makes them suitable for indoors 

or out. The true-scale body and illuminated 

headlights and taillights create a 

great look. For operation all you need 

are eight regular or rechargeable AA 

batteries. 

Features: 

● Completely pre-assembled ready- 

to-run model 

● Built-in 40-Mhz remote control 

system 

● Detailed body 

● With headlights and taillights 

● Rear wheel drive with differential 

● 2 speeds with turbo function 

● Independent suspension in front 

● Rear suspension 

● Instructions in German / English / 

French 

Specification 

Scale 1:16 


Width 125 mm 


All-up weight RTR, approx. 420 g 

Wheelbase approx. 160 mm 

Wheel diameter 40 mm 

Ground clearance 10 mm 

MERCEDES-BENZ SLS AMG 


Scale 1:16 

92000 


With illuminated 

headlights and 

taillights 

RC functions 

Forward / turbo speed forward 

Forward right / left 

Stop 

Reverse 

Reverse right/left 

AUDI A4 DTM 


Scale 1:16 

NISSAN GT-R SUPER GT 


Scale 1:16 






All●models●are●manufactured●under● 

license●from●the●respective●auto● 

manufacturers. 

44 45 


RC On-ROad mOdel 

For●operation●you●need●only●8●AA● 

rechargeable●mignon●batteries●or●8● 

regular●batteries.●Then●let●the●fun● 

begin●with●this●very●true-to-detail●and● 

low-priced●model. 

Car models


PORSCHE 911 GT2 


scale 1:28 






The new Junior Line Scale-Cars on a 

scale of 1:28 are the ideal first RC car. 

The vehicles are easy to master, extremely 

robust, and, thanks to the turbo 

function, reach speed of up to 7 km/h. 

That makes them suitable for indoors 

or out. The true-scale body and illuminated 

headlights and taillights create a 

great look. For operation all you need 

are four (92012 six) regular or rechargeable 

AA batteries. 

Features 

● Completely pre-assembled ready- 

to-run model 

● Built-in 27-Mhz remote control 

system 

● Detailed body 

● With headlights and taillights 

● Rear wheel drive with differential 

● Independent suspension in front 

● Swing axle rear suspension 

● Instructions in German / English / 

French 

With illuminated 

headlights and 

taillights 

Specification 

Scale 1:28 

Overall length, approx. 145 - 164 mm 

Width approx. 65 mm 

Height, approx. 52 - 60 mm 

All-up weight RTR, approx. 180 - 200 g 

Wheelbase approx. 88 - 100 mm 



MINI COOPER S 


Scale 1:28 

92010 

92011 

TOYOTA FJ CRUISER 


Scale 1:28 

PEUGEOT 207 


Scale 1:28 

RC functions 

Forward 

Forward right / left 

Stop 

Reverse 

Reverse right/left 

BMW 320si WTCC 


Scale 1:28 





46 47 

92012 

92014 

92013 

All●models●are●manufactured●under●● 

license●from●the●respective●auto●● 

manufacturers. 


For●operation●you●need●only●4●AA●● 

rechargeable●mignon●batteries●or●4● 

regular●batteries.●Then●let●the●fun●● 

begin●with●this●very●true-to-detail●and● 

low-priced●models. 

Car models

RC-Off-Road-Short-Course-Truck 

BAJA SC XXS 4WD 


Electric Off-Road Short Course Truck, scale 1:24 


BAJA SC XXS 4WD RTR 

● Preassembled, ready-to-run 4WD 

chassis with all-wheel drive and 2 

bevel gear differentials 

● GM-Racing XG-2 RC system with 

steering servo and controller / receiver 

unit installed 

● Digital proportional remote control; 

continuously variable control of steering 

and gas 

● Powerful electric drive system with 

RC131 motor 

● 4 shock absorbers 

● 4 cardan drive shafts for power 

transmission to all 4 wheels 

● Painted body (available in 2 different 

colors) 

Additional featuresHigh-Grip offroad 

tyres 

● Central cardan drive shaft 

● Independent suspension with double 

transverse arms on front and rear 

axles 

● Robust plastic chassis, shock absorber 

bridges, and transverse control 

arms 

● 3 different pinions included 

● Many upgrade parts available, such 

as oil-filled shock absorbers, metal 

cardan shafts, or adjustable trackrods 

Remote control 

Included with delivery 

Specification 

Scale 1:24 


Width 121 - 130 mm 




Electric motor RC 131 



Power battery 

(4 pcs) 

3426 3 

Energy Set 

Charger and batteries 

AA (12pcs.) 

90130 1 

RC functions 

Right / left 

Forward / brake / reverse 


Under order number 90120.XX in the 

price list or in the Online-Shop at 

www.graupner.de 

RC Off-Road Monster Truck 

MONSTER FLASH XXS 4WD 


Electric Off-Road Monster Truck, scale 1:24 


MONSTER FLASH XXS 4WD 

RTRPreassembled, ready-to-run 

4WD chassis with all-wheel drive 

and 2 bevel gear differentials 






and gas 


RC131 motor 






RC functions 

Right / left 




price list or in the Online-Shop at www. 

graupner.de 








axles 



arms 





Specification 

Scale 1:24 


Width 121 - 130 mm 







Power battery 

(4 pcs) 

3426 3 

Energy Set 


AA (12pcs.) 

90130 1 

The●GM-Racing●BAJA●Short●Course● 

XXS●4WD●Truck●on●a●scale●of●1:24●guarantees●unlimited●riding●fun●inside● 

and●out.●Built●like●a●full-sized●buggy,● 

with●independent●suspension,●hightraction●knobby●offroad●tyres,●and● 

high●ground●clearance●make●it●perfect● 

for●any●terrain. 

50 51 

Off-ROad mOdels 

With●its●powerful●electric●motor,●the● 

model●reaches●up●to●30●km/h●with●extremely●long●running●times. 

The●model●is●equipped●with●a●highquality,●continuously●variable●GM-Racing●XG-2●remote●control●system.●For●optimal●speed●-●indoors●or●out●-●3●different●gear●reductions●are●included. 

Requires●4●AA●rechargeable●batteries● 

with●matching●charger●for●the●vehicle● 

and●8●AA●batteries●for●the●transmitter. 

Car models

RC Off-Road Buggy 

FLASH XXS 4WD RTR 


Electrick Off-Road Buggy, scale 1:24 


FLASH XXS 4WD RTRPreassembled, 

ready-to-run 4WD chassis 

with all-wheel drive and 2 bevel 

gear differentials 






and gas 


RC131 motor 






Specification 

Scale 1:24 


Width 121 - 130 mm 










axles 



arms 







RC functions 

Right / left 




Power battery 

(4 pcs) 

3426 3 

Energy Set 


AA (12pcs.) 

90130 1 



price list or in the Online-Shop at 


RC Off-Road Truggy 

LEOPARD XXS 4WD RTR 


Electric Off-Road Truggy, scale 1:24 

RC functions 

Right / left 





LEOPARD XXS 4WD RTR 


chassis with all-wheel drive and 2 

bevel gear differentials 






and gas 


RC131 motor 






Specification 

Scale 1:24 


Width 121 - 130 mm 










axles 



arms 







Power battery 

(4 pcs) 

3426 3 

Energy Set 


AA (12pcs.) 

90130 1 



price list or in the Online-Shop at www. 

graupner.de 

The●GM-Racing●FLASH●XXS●4WD● 

Buggy●on●a●scale●of●1:24●guarantees● 

unlimited●riding●fun●inside●and●out.● 

Built●like●a●full-sized●buggy,●with●● 

independent●suspension,●high-● 

traction●knobby●offroad●tyres,●and● 

high●ground●clearance●make●it●perfect● 

for●any●terrain. 

50 51 


With●its●powerful●electric●motor,●the● 

model●reaches●up●to●30●km/h●with●● 

extremely●long●running●times. 

The●model●is●equipped●with●a●highquality,●continuously●variable●GM-Racing●XG-2●remote●control●system.●For●optimal●speed●-●indoors●or●out●-●3●different●gear●reductions●are●included. 

Requires●4●AA●rechargeable●batteries● 

with●matching●charger●for●the●vehicle● 

and●8●AA●batteries●for●the●transmitter. 

Car models

RC car accessories 

Upgrade parts and special accessories XXS modells 

Shock absorber, aluminium, 

(4 pcs.) 


Transverse control arm, aluminium, 

front/rear (2 pcs.) 

Order No. 90120.104 

Differential steel gates (2 pairs) 

Order No. 90120.108 

Tuning motor RC 180 

Order No. 90120.101 

Motor heat sink, aluminium 

Order No. 90120.105 

Metal articulated shaft, front 

(1 pair) 

Order No. 90120.109 

Ball bearing set XXS-S series 

(14 pcs.) 

Order No. 90120.102 

Upper transverse control arm, 

front adjustable (2 pcs.) 

Order No. 90120.106 

Metal articulated shaft, rear (1 pair) 

Order No. 90120.110 

Shock absorber bridge, aluminium, 

front/rear (2 pcs.) 

Order No. 90120.103 

Upper transverse control arm, rear 

adjustable (2 pcs.) 

Order No. 90120.107 

Differential complete 


Suspension, aluminium, front 

(4 pcs.) 


Car body for MONSTER FLASH 

XXS, black/blue 

Order No. 90120.33 

Car body for BAJA SC XXS black/ 

red 

Order No. 90120.37 

Wheel carrier, aluminium, rear 

(1 pair) 



XXS, black/red 

Order No. 90120.34 

Car body for BAJA SC XXS blue/ 

yellow 

Order No. 90120.38 

Car body for LEOPARD XXS silver/ 

blue 

Order No. 90120.31 


XXS black/red 

Order No. 90120.35 

Washers for car body (12 pcs.) 

Order No. 90120.39 

Car body for LEOPARD XXS black/ 


Order No. 90120.32 


black/blue 

Order No. 90120.36 

Energy Set Charger and batteries 

AA (12pcs.) 


52 

53 

Car models


ROADFIGHTER BUGGY 2WD RTR, scale 1:10, 2.4GHz 

Order No. 90168.RTR 

Electric off-road Truggy 2WD scale 1:10 


The newly developed GM Racing 

Roadfighter Buggy is the perfect vehicle 

for beginners in the RC car area. 

Thanks to the powerful motor, the model 

reaches high speed. The low-loss, 

low-service rear drive is optimal for 

drifts and wheelies. With its big wheels 

and high ground clearance, it can take 

on any terrain. The Roadfighter Buggy 

is equipped standard with a high-quality 

GM Racing XG-6i 2.0 Sport-Spec 

2.4 GHz remote control system and is 

99% pre-assembled. All you need are 

an engine battery and rechargeable or 

regular batteries for the remote control. 

Pre-assembled ready-to-run vehicle 

with rear-wheel drive 

● Service-friendly, sturdy construction 

● Bevel gear differential on the rear 

axle 

● GM-Racing XG-6i 2.0 Sport-Spec 

2.4 GHz RC system with control 

servo and receiver installed and connected. 

The control rods are pre-adjusted 

● Powerful No. 540 motor and electronic 

speed controller 

Specification 

Scale 1:10 


Width 245 mm 




Wheel diameter 81-85 mm 


Reduction gear unit 1:8,8 

Electric motor 540 

Adjustable camber and 

toe-in by means of 

right/left screw rods 

Multi-part tub glass-fibre-reinforced-plastic 

chassis 

An●affordable●start●in●the●area●of●RC● 

cars●is●the●newly●developed●GM●Racing●Roadfighter●Buggy.●Nevertheless,●it●offers●everything●that●makes● 

up●a●high-quality●vehicle:●oil-filled● 

shock●absorbers,●ball●bearings,●differential,●and●a●powerful●motor●for●great●driving●fun.●The●high●ground●clearance●means●that●the●Roadfighter● 

2WD●Buggy●can●easily●operate●in●any● 

terrain.●The●high-quality●GM-Racing● 

XG-6i●2.0●Sport-Spec●2.4●GHz●remote● 

control●ensures●that●you●always●have● 

perfect●control. 

Spare parts 


Available under order nos. 90166.XX 

and 90168.XX in the price list or in the 

Online Shop at www.graupner.de 

Type 

Roadfighter Brushless conversion kit /engine/controller 

Power battery (4 pcs) 

Order No. 

97161 

3426 

No. off 

1 

2 

RC functions 

Mignon ECO-Power 1.2V/800 mAh 3621 8 

Right/left 

GM Power Pack 7.2V/3600 mAh JP plug 98900 1 

Remote control system included in delivery 

Forward/brake/reverse 

MINI LADER 3 6424 1 

54 

55 

RTR with RC 

● 4 adjustable aluminium oil-filled 

shock absorbers 

● Steel drive shafts on the rear axle 

● Comes complete with high-quality 

ball bearings 

● Painted Buggy body 

Additional features 


● One-piece tub CFRP chassis. 

● Adjustable camber and toe-in by means 

of right/left screw rods 

● Stable protective frame for the motor 

● Completely encapsulated drive mechanism 

● Adjustable slip coupling 

Front axle struts 

Adjustable oil-filled shock absorbers 

Steering 

servo 

Steel drive shafts 

Completely encapsulated drive 

mechanism 

Large High-Grip offroad tyres 

Large rear spoiler 

Stable protective frame 

for the motor 

Electric motor 

Adjustable slip 

clutch 


Car models

RC Off-Road Truggy 

ROADFIGHTER ST SPORT 2WD STADIUM TRUCK scale 1:10 


Electric off-road Truggy 2WD scale 1:10 



Roadfighter ST is the perfect vehicle for 

beginners in the RC car area. Thanks to 

the powerful motor, the model reaches 

high speed. The low-loss, low-service 

rear drive is optimal for drifts and wheelies. 

With its big wheels and high 

ground clearance, it can take on any 

terrain. The Roadfighter ST is equipped 

standard with a high-quality GM Racing 

XG-6i 2.0 Sport-Spec 2.4 GHz remote 

control system and is 99% pre-assembled. 

All you need are an engine battery 

and rechargeable or regular batteries 

for the remote control. Pre-assembled 

ready-to-run vehicle with rear-wheel 

drive 

Remote control system included in delivery 


axle 


2.4 GHz RC system with control 


The control rods are pre-adjusted 

● Powerful No. 540 motor and electronic 






ball bearings 

● Painted body 

RTR with RC 



● One-piece tub CFRP chassis. 

● Adjustable camber and toe-in by means 

of right/left screw rods 


● Completely encapsulated drive mechanism 

● Adjustable slip coupling 

Specification 

Scale 1:10 


Width 325 mm 






Reduction gear unit 8.8:1 


Adjustable camber and 

toe-in by means of right/left 

screw rods 

Front axle with struts 


Available under order no. 90166.XX in 

the price list or in the Online Shop at 


RC functions 

Right/left 



chassis 



Roadfighter Brushless conversion kit /engine/controller 97161 1 






cars●is●the●newly●developed●GM●● 

Racing●Roadfighter●ST●Stadium●Truck.● 

Nevertheless,●it●offers●everything●that● 

makes●up●a●high-quality●vehicle:●● 

aluminium●oil-filled●shock●absorbers,● 

ball●bearings,●differential,●and●a●● 

powerful●motor●for●great●driving●fun.● 

The●high●ground●clearance●means● 

that●the●Roadfighter●ST●can●easily● 

operate●in●any●terrain.●The●high-quality●GM-Racing●XG-6i●2.0●Sport-Spec● 

2.4●GHz●remote●control●ensures●that● 

you●always●have●perfect●control. 

56 

57 

Large High-Grip 

offroad tyres 

Steering servo 

The figure shows th emodel with brushless tuning drive system 

Adjustable aluminium 

oil-filled shock absorbers 

Completely encapsulated 

drive mechanism 




Adjustable slip clutch 


Off- ROad MOdelle 

Car models


ROADFIGHTER SC 2WD SHORT COURSE RTR, scale 1:10 


Electric Off-Road Short Course 2WD scale 1:10 



Roadfighter SC Short Course Truckis 

the perfect vehicle for beginners in the 

RC car area. Thanks to the powerful 

motor, the model reaches high speed. 

The low-loss, low service rear drive is 

optimal for drifts and wheelies. With its 

big wheels and high ground clearance, 

it can take on any terrain. The Roadfighter 

SC is equipped standard with a 

high-quality GM Racing XG-6i 2.0 

Sport-Spec 2.4 GHz remote control 

system and is 99% preassembled. All 

you need are a drive battery along with 

rechargeable or regular batteries for the 

remote control. Preassembled readyto-run 

vehicle with rear-wheel drive 


axle. 


2.4 GHz RC system with steering 


The steering linkage is preadjusted 

● Powerful No. 540 motor and 

electronic speed 

controller 

● 4 adjustable oil-filled shock absorbers. 



ball bearings 

● Painted body 



● One-piece GRP tub chassis 

● Adjustable camber and toe-in by 

means of right/left screw rods 


● Completely encapsulated drive 

mechanism 

● Adjustable slip clutch 

Specification 

Scale 1:10 


Width 250 mm 


All-up weight RTR, approx. 1600 g 







chassis 

Adjustable camber and toe-in by means of 

right/left screw rods 

Adjustable oil-filled shock absorbers 


Available under order nos. 90166.XX 

and 90167.XX in the price list or in the 


RC functions 

Right/left 


Ram protection front, rear, and sides 



Roadfighter Brushless conversion kit /engine/controller 97161 1 






cars●is●the●newly●developed●GM● 

Racing●Roadfighter●SC●Short●Course● 

Truck.●Nevertheless,●it●offers● 

everything●that●makes●up●a●highquality●vehicle:●aluminium●oil-filled● 

shock●absorbers,●ball●bearings,● 

differential,●and●a●powerful●motor●for● 

great●driving●fun.●The●high●ground● 

clearance● 

means●that●the●Roadfighter●SC●can● 

easily●operate●in●any●terrain.●The●highquality●GM-Racing●XG-6i●2.0●Sport- 

Spec●2.4●GHz●remote●control●ensures● 

that●you●always●have●perfect●control. 

58 

59 



Large High-Grip off-road tyres 


Completely encapsulated 

drive mechanism 





Car models

RC-Punisher-Crawler 

PUNISHER CRAWLER 4WDS RTR scale 1:10 


Electric Crawler 4WDS, scale 1:10 


Rock crawling is an extreme form of 

off-road sport with specially modified 

vehicles. The extraordinarily high 

ground clearance and extreme axle lift 

let you conquer nearly any terrain. 

The PUNISHER is the powerful small 

version of this vehicle. With all-wheel 

drive and two RC390 motors, plus the 

new all-wheel steering and 4 different 

steering modes, it can be moved with 

extreme precision and easily overcome 

obstacles. 

The PUNISHER crawler comes standard 

with a new GM-Racing 3-channel 

crawler FM remote control with four 

steering modes that can be switched at 

the transmitter and is 99% preassembled. 

All you need to get started are the 

appropriated batteries for the remote 

control and a matching charger. The 

drive battery pack is included. Preassembled 

4WDS chassis with all-wheel 

drive via two RC390 motors 

● All-wheel drive with 4 steering modes, 

switchable at the transmitter 

● Rigid axles for the best driving performance 

● GM-Racing 27-MHz RC system with 

steering servos and receiver installed 

and connected 

● Steering linkage is pre-adjusted 

● Powerful RC390 motors on the front 

and rear axles along with the matching 

speed controllers 

● 4 high-quality oil-filled shock absorbers 

● Sturdy aluminium chassis and chassis 

braches, red anodised 

● Painted body with decals 

applied 


● Fully equipped with high-quality ballraces 

● High-Grip crawler tyres with aluminium 

bead lock rings 

● Rigid axle front and rear 

● Adjustable ground clearance 

● Powerful 6-kg steering servos on 

front and rear axles 

Specification 

Scale 1:10 


Width 268 mm 






Remote control unit included in delivery 

RC functions 

Right/left 

Forward/reverse 

All-wheel drive, 4 modes 





90140.RTR with black body 





Battery NiMH 1N-2000 1.2V RTU Mignon AA(4 pcs.) 2498 2 

4WDS steering 

The●Punisher●Crawler●4WDS●has●a● 

unique●and●patented●all-wheel●steering●system.●As●shown●in●the●graphic●below,●the●axles●can●be●controlled●variably●from●the●remote●control●unit●via●2●servos.●This●provides●maximum●manoeuvrability. 

Mode●1:●Steering●f+r●●parallel 

Mode●2:●Steering●rear 

Mode●3:●Steering●front 

Mode●4:●All-wheel●steering 

60 61 


Car models

RC-Off-Road-Monster-Truck 

LOW RIDER MONSTER TRUCK 4WD RTR 


Electric Off-Road Monster Truck, scale 1:10 


The Low Rider Monstertruck is a hightech 

model on a scale of 1:10. Whether 

on or off the road, its large wheels and 

enormous ground clearance make it 

the ideal fun model for any kind of terrain. 

The powerful electric motor and 

all-wheel drive ensure extraordinary driving 

performance. 

It comes standard with a high-quality 

GM-Racing XG-6i 2.0 FHSS Sport- 

Spec 2.4 GHz-remote control system 

and a powerful electric motor and is 

99% preassembled. 


chassis 

● Swing axles with steel bevel-gear differentials 

● Telescoping-type drive shafts for power 


● Side plates and braces of high-quality 

anodised aluminium 

● GM-Racing XG-6i 2.0 FHSS Sport- 

Spec 2.4 GHz RC system with steering 

servo and receiver unit installed 

and connected 

● Powerful 550 motor and electronic 



shock absorbers. 

● 5-spoke monster truck rims with 

semi-pneumatic off-road tyres 

● Completely equipped with ballraces 

● Adjustable toe-in 

● Painted and glued monster truck 

body 

Specification 

Scale 1:10 


Width 325 mm 



Ground clearance 50-100 mm 



Available under order no. 90165.XX and 

90163.XX in the price list or in the 


RC functions 

Right/left 


Electronic speed controller 

Oil-filled shock absorbers 







The●Low●Rider●Monster●Truck●4WD● 

RTR●is●a●combination●of●crawler●and● 

monster●truck.●The●relatively●slow-going●model●is●an●ideal●beginer‘s●model● 

for●playing●in●the●yard,●gravel●pit,●or● 

on●the●nearest●ball●field.●The●permanent●all-wheel●drive●and●very●high● 

ground●clearance●enable●it●to●master● 

nearly●any●terrain.●Running●time●per● 

battery●charge●is●15-30●minutes. 

62 63 


Aluminium steering arms 

Cardan drive shaft 

Battery compartment 


On/off switch 

Optional all-wheel steering kit available 

Rough-tread, 

air-filled tires 

5-spoke rims 


Car models


FLASH 3.0 Brushless RACE Buggy 4WD RTR, scale 1:8 


GM Racing Flash 3.0 Race RTR 


The newly developed Short Course 

Flash 3.0 combines the enormous performance 

of a 1:8 gas model with the 

advantages of an electric model. 

Unique for this price class is the highquality 

equipment, including the red 

anodised 17-mm Big Bore aluminium 

shock absorbers, machined chassis 

braces, or shock absorber bridges, all 

of which make the Short Course Flash 

a real racer. It comes standard with a 

high-quality GM-Racing XG-6i Sport- 

Spec 2.4-GHz remote control system 

and a powerful brushless motor, and it 

is 99% pre-assembled. All you need 

are the drive battery as well as rechargeable 

or regular batteries for the remote 

control system.Factory-assembled 

4-WD chassis with four-wheel 

drive and three bevel gear differentials 

● Centre drive with centre for the best 

Speedtest 7.4V approx. 50km/h 

11.1V approx. 75km/h 

14.8V approx. 100km/h 

The illustrations show the RTR model as prototype 

running characteristics 

● Optimised motor position in comparison 

to the nitro version for the best 

running and jumping behavior 

● GM-Racing XG-6i Sport-Spec 2.4- 

GHz RC system with steering servo 

and receiver installed and connected 

● Steering and throttle linkages already 

adjusted 

● Powerful brushless operation with 

motor (about 2 KW) and matching 

120 A brushless controller 

● Four high-quality, 17-mm, adjustable 

aluminium Big Bore oil-filled shock 

absorbers 

● CVD drive shafts for power transmission 

to the front wheels 

● Painted polycarbonate body shell 

● Sturdy machined aluminium shock 

absorber bridges, chassis braces, 

and front steering lever red anodised 

Additional Features 

● Fully equipped with high-quality ballraces 

● High-grip Rally Game tyres fully bonded 

and pre-installed on the rims 

● Metal main gear wheel, idler gear, 

and engine pinion 



axles 

● Transverse stabiliser bars on front 

and rear axles 

● Sturdy 3-mm aluminium chassis 

● Adjustable castor range of 17° - 24° 

on the front axle 

● Closed RC box for receiver 

LiPo-Brushless 

Powered 

Specification 

Scale 1:8 


Width 300 mm 



Wheelbase adjustable 322-326 mm 



Electric motor Brushless 

Remote control included with delivery 

Colour differs from that delivered 


Available under order no. 90171.XX, 

90170.XX, and 90172.XX in the Online 

Shop at www.graupner.de 

RC functions 

Right / left 




ULTRAMAT 14 plus 6464 1 



LiPo Battery V-MAXX 60C 2S2P/5800 7.4V G4 99013 1 

LiPo Battery V-MAXX 50C 3S2P/6800 11.1V G3.5 99006 1 

The●GM●Racing●Short●Course●is● 

based●on●the●Flash●3.0●Brushless● 

Race●Buggy●and●is●the●perfect●first● 

step●into●the●world●of●1:8-scale●electric●buggies.●The●tremendous●performance●and●off-road●capability●of●1:8●off-road●models●can●now●be●experienced●with●electric●propulsion●as●well.●The●GM-Racing●Short●Course●Brushless●Racer●●offers●high-quality●competition●technology●at●an●affordable● 

price.●Numerous●machined●aluminium● 

parts●provide●the●necessary●stability● 

even●under●the●toughest●conditions.● 

To●get●started●all●you●need●is●a●2-cell● 

rechargeable●battery●pack.●A●3-cell● 

LiPo●battery●is●enough●to●match●the● 

performance●of●a●competition●gas●engine●buggy,●and●without●the●all●the●racket●and●fumes.●If●that●is●still●not● 

enough●power●for●you,●you●can●use●4● 

LiPo●cells●to●ramp●up●the●power●and● 

reach●speeds●of●over●100●km/h●with● 

additional●wear●and●tear,●however. 

64 

65 

CVD drive shafts in 

front 

Transverse stabiliser bars 

on front and rear axles 

Independent suspension with 

double transverse arms on 

front and rear axles 

Linkage with adjustable 

Ackermann 

Big Bore oil-filled shock absorbers 

Right-hand / left-hand 

threaded trackrods 

Aluminium chassis braces 

High-power steering 

servo with metal gears 

Dust-protected 

receiver box 

Brushless motor 

Universal battery box for 

hook-and-loop or clip 

attachment 

Robust machined 

aluminium chassis 

Brushless speed controller 120A 

Mid-mounted differential 

with metal gear wheels 

On / Off switch 


Car models


FLASH 3.0 NITRO RACE BUGGY 4WD RTR, scale 1:8 


GM-Racing Flash 3.0 Race RTR 


The Short Course Flash 3.0 is based on 

the successful Flash 3.0 buggy chassis 

and sets new standards for 1/8 nitro 

ready-to-run models. It comes standard 

with everything you need to compete 

and succeed on the short course. 

Unique in this classe, for example, are 

the red anodised 17-mm Big Bore aluminium 

shock absorbers, machined 

aluminium shock absorber bridges, and 

chassis braces, all of which make the 

Flash a real racer. The Flash 3.0 comes 

standard with a high-quality GM-Racing 

XG-6i Sport-Spec 2.4-GHz remote 

control system and a powerful GM Nitro-Bull 

3.5 cc motor that is equipped 

with a pull cord starter and is 99% preassembled. 

All you need are fuel, rechargeable 

or regular batteries for the 

remote control, and a nitro starter set. 

RACE RTR 

● Factory-assembled 4-WD chassis 

with four-wheel drive and three bevel 

gear differentials 

● Centre differential with separately adjustable 

epoxy disc brakes front and 

rear 

● GM-Racing XG-6i Sport-Spec 2.4- 

GHz RC system with steering servo, 

throttle servo, and receiver installed 

and connected 

● Steering and throttle linkages already 

adjusted 

● Powerful, reliable 3.5-cc capacity 

GM-Racing Nitro Bull Motor with 

pull-cord starter. 

● Adjustable castor range of 17° - 24° 

● Four high-quality, adjustable, 17-mm 

Big Bore oil-filled shock absorbers. 

● CVD drive shafts for power transmission 

to the front wheels. 

● Painted and bonded polycarbonate 

body shell. 

Additional Features 

● Aluminium parts and shock absorbers 

red anodised 

● Completely equipped with high-quality 

ballraces 

● Closed, splash-protected RC box for 

battery and receiver 

● High-grip Rally Game tyres fully bonded 

and installed on the rims 

● Metal main gear wheel and steel bell 

with 3-cheek clutch 



axles 

● Transverse stabiliser bars on front 

and rear axles 

● Aluminium Masterfix tuned pipe 

● Tank capacity 125 ccm 

● Sturdy 3-mm aluminium chassis 

Specification 

Scale 1:8 


Width 300 mm 






Motor 3,5 ccm 

Remote control system included in the set 

The illustrations show the RTR model with standard equipment 

Powerful steering servo 

Independent suspension with 

with metal gears 

double transverse arms on front 

and rear axles Robust machined 3-mm 

aluminium chassis 

Transverse stabiliser bars 

on front and rear axles 

Right-hand / left-hand 

threaded trackrods 

Robust machined aluminium 

shock absorber bridges 

Big Bore 17-mm adjustable 



Available under order no. 90171.XX, 

90173.XX, and 90170.XX in the Online 

Shop at www.graupner.de 

66 

67 

RC functions 

Right / left 

Throttle / brake 

CVD-Antriebswellen 

vorne 

125 cc fuel tank 

GM Nitro-Bull 21 motor 

Aluminium Masterfix tuned pipe 

Centre differential with separately adjustable 

disc brakes front and rear 

Enclosed, 

splashproof RC 

box for battery 

and receiver 

Machined aluminium 

chassis braces 



TITAN PRO RS 25, 2.5l 2643.2L 1 

G5 standard glowplug, cold 92642 1 

Nitro Starter Set 90504 1 



IB 3+2-1600 NiMH BEC2/3A receiver battery 8716.5H 1 

The●newly●developed●GM●Racing● 

Flash●3.0●Race●is●the●perfect●first●step● 

into●the●world●of●1:8●scale●nitro●buggies.●The●vehicle●offers●high-quality●competitive●technology●at●a●sensationally●affordable●price.●Numerous●machined●aluminium●parts●provide●the● 

necessary●stability,●even●under●the● 

toughest●conditions,●making●it●ideal● 

for●the●beginner,●but●also●for●the●driver● 

entering●competitions●for●the●first● 

time.●The●large●17-mm●Big●Bore●shock● 

absorbers●combined●with●the●fully●adjustable●chassis●make●for●perfect●ground●contact.●The●powerful●and●reliable●Nitro-Bull●motor●with●pull-cord● 

starter●provides●the●necessary●power● 

for●excellent●driving●performance●in● 

any●terrain. 


Since●its●design●is●nearly●identical●to● 

that●of●its●„twin“,●the●Short●Course● 

Flash●3.0●Brushless●Race●Buggy,●it●is● 

possible●at●any●time●to●convert●to● 

brushless●operation.●The●basic●chassis●is●identical●in●both●models. 

Car models

RC car accessories 

RTR sets with new XG-6i FHSS 2,4 GHz R/C systems 

XG-6i 2.0 FHSS Sport-Spec 

2,4 GHz 


RADICATOR electro 4WD RTR RC, 

scale 1:10 

Order No. 90500.RTR 

WP RADICATOR NITRO TRUGGY 

4WD M. RC, scale 1:10 


Flash 3.0 Race Brushless Buggy 

4WD, scale 1:8 


BAJA ELEKTRO-TRUGGY 4WD, 

scale 1:10 RTR 


WP MINI ST16 BRUSHL. TRUGGY 

4WD RTR, scale 1:16 


Flash 3.0 Nitro Race Buggy 4WD 

RTR, scale 1:8 


MONSTER TRUCK MT6 FUEL 2WD 

RTR, scale 1:6 


WP MINI B16 BRUSHL.BUGGY 4WD 

RTR scale 1:16 


2,4 GHz 

WP MINI ST16 BAJA TRUGGY 4WD 

RTR, scale 1:16 BR 


GM FUN-TRUGGY-LEOPARD 4WD, 

scale 1:8 RTR 


RX XG-6i 2.0 FHSS Receiver, 3 

channels 

Order No. 94002.1 

Tuned pipe silencerand manifold T- 

1060for 1:10 


Buggy tyre Lube 30 and inlays 

Order No. 96066.30 

Brushless Sport 120R 


Tuned pipe silencerand manifold T- 

2080for 1:8 


Wheel assembly, glued, Lube 20 

Order No. 96066.20K 

Roadfighter Brushless conversion 

kit /engine/controller 



Order No. 96066.5 



68 69 

Glow plug RP8 



Order No. 96066.20 



Car models


CARISMA GT14B ARR II 4WD BUGGY 


Electric Off-Road, scale 1:16 


The new Carisma GT14B RTR is a 

completely new development designed 

to crate the best off-road buggy on a 

scale of 1:16. The GT14B, which is 

based on a sturdy GRP chassis with independent 

suspension and large oilfilled 

shock absorbers, easily masters 

nearly any terrain, thanks to its great 

ground clearance. The fully adjustable 

chassis with all-wheel drive and powerful 

370 engine (optional) deliver top performance. 

The ARR II Set is delivered pre-installed 

with bevel gear differential and transparent 

polycarbonate body. The steering 

servo is included, but no remote control, 

speed controller, battery, or motor. 

Completely factory-assembled GRP 

4-WD chassis, scale 1:16 

● All-wheel drive via articulated 

joint, 

metal drive 

shafts to all 

wheels 

● Camber/ 

toe-in 

adjustable 

via 

right/left 

threaded 

rods 

● Two bevel 

gear differentials, 

slip 

coupling suitable for 

370 electric motor 

● Independent suspension with 



ballraces 

● High-traction, air-filled off-road tyres 

with inserts 

● Transparent polycarbonate body 

● Steering servo included 

● Many tuning parts available 

RC functions 

Right/left 


Specification 

Scale 1:16 


Width 205 mm 







Complete with high-quality 

ballraces 

Figure shows the model with accessories, such as motor and speed controller 





The●Carisma●GT14B●chassis●is●just●as● 

technically●sophisticated●as●a●1:10● 

competition●buggy,●but●on●a●smaller● 

scale.● 

That●makes●the●models●lighter●and● 

more●agile,●and●they●can●be●operated● 

without●any●problem●in●a●limited● 

space.●The●use●of●GM-Racing●brushless●systems●and●LiPo●batteries●results●in●unbelievably●great●performance.●The●ARR2●variant●can●be● 

equipped●individually●with●remote● 

control,●drive●battery,●and●propulsion● 

systems,●because●they●are●not●included●in●delivery. 

70 

71 

All-wheel drive via 

articulated joint 

Adjustable oil-filled 


Metal drive shafts to 

all wheels 

Sturdy transverse control 

arms for optimal handling 

Chassis tub for 

perfect protection 


Steering servo with 

servo saver included 

GRP chassis and radio plate 

High-traction knobby offroad tyres 

Sturdy bevel gear 

differential 

Adjustable right/left track rods 


All●models●are●completely●assembled.● 

The●GT14B●can●be●upgraded●with●optional●tuning●parts,●such●as●carbon● 

fibre●chassis,●CVD●articulated●joint,●or● 

stabilisers. 

Car models


CARISMA GT14B RTR 4WD BUGGY 


Eectric Off-Road, scale 1:16 


The new Carisma GT14B RTR is a 

completely new development designed 

to create the best off-road buggy on a 

scale of 1:16. The GT14B, which is 

based on a sturdy GRP chassis with independent 

suspension and large oilfilled 

shock absorbers, easily masters 

nearly any terrain, thanks to its great 

ground clearance. The fully adjustable 

chassis with all-wheel drive and powerful 

370 engine (optional) deliver top performance. 

Thanks to the newly developed 2.4 

GHz FHSS remote control system, now 

all you have to do is switch on and take 

off; no more frequency problems or interference. 

Also new is the separation of receiver 

and speed controller, so that the models 

can easily be converted to brushless 

systems. 

All the equipment you need for operation 

is included, such as drive battery 

and charger. 

● Completely factory-assembled GRP 

4-WD chassis, scale 1:16 

● All-wheel drive via articulated joint 

● Metal drive shafts to all wheels 

● Camber/toe-in adjustable via right/ 

left threaded rods 

● Two bevel gear differentials, slip 

coupling 

● 370 electric motor 

● 2.4 GHz remote control system, 

receiver, and speed controller sold 

separately 

● Independent suspension with 



ballraces 

● High-traction, air-filled off-road tyres 

with inserts 

● Painted polycarbonate body with 

decals 

● 7.2 V NiMH drive battery with 

matching charger already included 

● Many tuning parts available 

RC functions 

Right/left 


Specification 

Scale 1:16 


Width 205 mm 







Complete scope of delivery 





The●Carisma●GT14B●chassis●is●just●as● 

technically●sophisticated●as●a●1:10● 

competition●buggy,●but●on●a●smaller● 

scale.●That●makes●the●models●lighter● 

and●more●agile,●so●they●can●be●operated●without●any●problem●in●a●limited●space.●The●use●of●GM-Racing●brushless●systems●and●LiPo●batteries●provides●unbelievably●great●performance,● 

up●to●80●kmh.● 

72 

73 73 


All●models●are●completely●assembled.● 

The●GT14B●can●be●upgraded●with●optional●tuning●parts,●such●as●carbon● 

fibre●chassis,●CVD●articulated●joint,●or● 

stabilisers. 

Car models

RC Formula 1 

CARISMA F14 EVO ARTO 2WD, scale 1:14 


F14 Electric, scale 1:14 


The newly developed Carisma formula 

chassis is a super-realistic, up-to-date 

formula model on a scale of 1:14. The 

torsion-resistant GRP chassis forms the 

basis of the formula racer; the adjustable 

chassis and true-to-scale body 

are sure to give you that racing feeling. 

It is delivered as an ARTR model, so 

you can choose whichever drive and 

remote control components you want. 

Ready, set, go for the F14 EVO season 

on a scale of 1:14! Completely preassembled 

4WD chassis on a scale of 

1:14 

● Bevel gear differentials on the rear 

axle 

● Independent suspension in front; 

one-piece rear axle with oil pressure 


● T-bar rear axle suspension 

● Adjustable chassis 


ballraces 

● True-to-scale air-filled tyres with inserts 

● True-to-scale polycarbonate body 

with applied parts such as diffusor, 

mirror, airbox camera, etc. 

● Plastic front and rear spoilers 

● Aluminium motor mounts 

● Pre-installed steering servo 

Specification 

Scale 1:14 


Width 128 mm 




RC functions 

Right/left 


Delivery includes transparent body 







XG-6i Race-Spec 2,4GHz 94001 1 

GM-GENIUS Sport 35R 7153 1 

GRAUPNER INLINE 380 7.2 V 6541 1 

NiMH Intellect 6N-1600 2/3A battery, connector „mini“ 98870.6 1 

LiPo battery V-MAXX45C 2/1600 CAR 7.4VG3.5 98976 1 

The●Carisma●F14EVO●ARTR●4WD●is● 

delivered●completely●preassembled● 

as●a●rolling●chassis●with●built-in●steering●servo,●but●otherwise●without●any● 

electronic●system.●That●enables●you● 

to●put●together●your●own●individual● 

formula●Racer●based●on●your●own● 

ideas.●Many●tuning●parts●and●spare● 

parts●are●also●available●individually.● 

The●small●scale●of●1:14●means●that●exciting●races●can●be●held●even●in●the●smallest●of●spaces.●A●transparent●formula●body●is●included●in●the●delivery. 

74 75 


Car models


CARISMA GT14 PRO MK2 ARTR 4WD 


Carisma GT14 series 


The Carisma GT14 PRO MKII is a pure 

competition chassis, as technically advanced 

as any high-class 1:10 competition 

touring car, but combined with the 

advantages of the smaller scale of 1:14. 

The GT 14 PRO MKII can be used with 

brushed or brushless motors. Depending 

on equipment, the brushless variant 

can reach speeds of up to 80 km/ 

hr. The high-traction rubber tyres on 

spoked wheels provide the needed 

traction. The model is delivered without 

body; most of the true-scale body 

shells from the Carisma GT14 range fit. 

Completely preassembled 4WD chassis 

on a scale of 1:14 with articulated 

drive shafts 

● New GRP chasis and radio plate for 

a low centre of gravity 

● New steering geometry for optimal 

running performance 

● Independent suspension with 4 adjustable 

oil pressure shock absorbers 

● 2 bevel gear differentials, adjustable 

slip clutch 

● New transverse control arm with adjustment 

screw for ground clearance 

● New shock absorber bridges for optimal 

shock absorber positioning 

● Aluminium motor ount 

● Completely ballraced 

● 4 deep-tread High-Grip tyres on new 

rims 

● Suitable for 6-cell 1600 mAh NiMH 

drive batteries and for LiPo batteries 

● Right/left rack end threads 

● Various toe-in and castor angles 

possible 

● Variable wheelbase 

RC functions 

Right/left 


Scope of delivery of the completely assembled chassis 

Specification 

Scale 1:14 


Width 132 mm 


Ground clearance 5-7 mm 



Transparent body available as accessory 


Available under order no. 90300.XX in 





Car body for MAZDA 6 GT14, unpainted 90300.119 1 

XG-6i 2.0 FHSS Sport-Spec 2,4 GHz 94002 1 

GM-GENIUS Sport 35R 7153 1 

GRAUPNER INLINE 380 7.2 V 6541 1 

LiPo battery V-MAXX45C 2/1600 CAR 7.4VG3.5 98976 1 

NiMH Intellect 6N-1600 2/3A battery, connector „mini“ 98870.6 1 

The●Carisma●GT14●PRO●MK2●ARTR● 

4WD●is●delivered●completely●preassembled●as●a●rolling●chassis●without● 

any●electronic●system.●That●enables● 

you●to●put●together●your●own●individual●GT14●Racer●based●on●your●own● 

ideas.●Many●tuning●parts●and●spare● 

parts●are●also●available●individually.● 

The●small●scale●of●1:14●means●that●exciting●races●can●be●held●even●in●the● 

smallest●of●spaces.●The●Mazda●6● 

body●has●proven●to●be●aerodynamically●perfect,●especially●for●the●extremely●fast●brushless●variant. 

76 77 


Car models


YOKOMO R12 PAN CAR 


Pan Car, scale 1:12 


World Champion 2010! 

The new Yokomo R12 is a thoroughbred 

competition vehicle for the 1:12 

class. This new development won the 

hotly contested title at its first big test at 

the World Championship 2010 in Burgdorf 

with Naoto Matsukura. With this 

spectacular debut, Team Yokomo once 

again demonstrates its leading role in 

the competition sector. 

A new kind of front axle with dual transverse 

control arms, central oil-filled 

shock absorber and stabilizer as well 

as the new rear axle with the large rim 

offset provide for razor-sharp control 

and undreamt-of traction. 

Innovative design and know-how make 

the new Yokomo R12 the best car in its 

class. New front axle with dual transverse 

control arms, oil-filled shock absorbers, 

and stabilizer 

● New rear axle with large rim-offset 

for the best traction 

● Adjustable aluminium rear axle for 

the best stability 

● 2 oil-filled shock absorbers for the 

rear wheel 

● Carbon fibre chassis 

● Titan track rods and axle pins 

● New, weight-optimised wheel drivers 

● Coated shock absorber housing 

● Many aluminium parts 

RC functions 

Right/left 

Throttle/brake 

Specification 

Scale 1:12 


Width 170 mm 





World Champion 2010 

The illustration shows the model with accessories, such as motor, speed controller, and RC system. 


Available under order no. 90403 in the 

Online Shop at www.graupner.de. 




GM-GENIUS 75 BRUSHLESS 97163 1 

BRUSHLESS GM PRO 10.5T metal 97305 1 

BRUSHLESS GM PRO 4,5T star wound metal 97284.5 1 

Servo DS 3781 BB, MG 5161 1 

LiPo Battery V-MAXX60C 1S2P/5800 3.7V G4 99005 1 

The●class●of●1:12●on-road●models,●the● 

so-called●Pan●Cars,●is●currently●experiencing●great●popularity.●Great●performance●and●a●relatively●low●competition●budget●are●the●advantages● 

compared●to●the●touring●car●racing● 

series.●The●Yokomo●R12●world●championship●model●gives●you●the●best● 

prerequisites●to●stand●up●to●tough● 

competition.●The●Yokomo●R12●should● 

be●your●vehicle●of●choice●in●the●1:12● 

off-road●area. 

78 79 


Car models


YOKOMO MR-4TC BD5 M 1:10 

Order No. 90401.W 

Electric touring car, scale 1:10 

Order No. 90401.W 

All the important details of modern touring 

cars have been incorporated in this 

latest development from Yokomo. With 

this competition model, numerous successes 

were celebrated in 2010. 

Changes in the WORLD SPEC edition 

compared to order no. 90401: 

● Main chassis: LiPo chassis 

● Radio plate for LiPo batteries 

● YBD.008FG light carbon-fibre-reinforced 

transverse control arm in front 

● YBD.008RG light carbon-fibre-reinforced 

transverse control arm in rear 

(40.5mm) 

● YBD.413G light carbon-fibre-reinforced 

transverse control arm in front 

● YBD.415SG light carbon-fibre-reinforced 

steering lever in front 

● YBD.415RG light carbon-fibre-reinforced 

hub in rear 

● YBD.500P Aluminium differential with 

blades 

Specification 

Scale 1:10 


Width 189 mm 




Ground clearance 4-10 mm 

Electric motor BRUSHLESS 

Complete spare parts 

program 

Scale 1:10 

EUROPEAN 

CHAMPION 2010 

Optimised oil-filled shock absorbers 


Available under order no. 90401.W in 

the Online Shop at www.graupner.com 

80 

81 

RC functions 

Right/left 

Forward/brake 

New differential with larger diameter differential discs 

Low-lying belt pullies 

Extremely low-lying motor 

Split engine block 

Chassis for LiPo and LiFe batteries 

CVD articulated joint with 2-mm pins 

Rigid axle 

New C hubs, rear hubs 



BRUSHLESS GM PRO 4,5T star wound metal 97284.5 1 

GM-GENIUS 120 BRUSHLESS 97168 1 


Servo DS 8421 BB, MG 5183 1 

Servo Saver medium size and strong clip 90558 1 

LiPo Battery V-MAXX60C 2S2P/5800 7.4V G4 99013 1 

Description: 

All the important details of modern 

touring cars have been incorporated 

into this development. This competitive 

model already achieved numerous 

successes in 2009. 

For example: Ronald Völker was the 

2009 Japanese champion. 


Features: 

● Motor lies as low as possible. 

● Extremely low belt pullies 

● Extremely simple adjustment of 

belt tension 

● Split engine block for better flex of 

the rear part of the chassis for more 

rear axle traction 

● New differential with larger diameter 

differential discs; making the 

differential smoother and keeping it 

from slipping so easily 

● New, improved CVD articulated 

joint with 2-mm pins 

● New C hubs, rear hubs 

● Improved shock absorbers 

● Extremely free and smooth new 

stabiliser mounts 

● Rigid front axle comes standard 

● Optimally suited for LiPo and LiFe 

batteries 

Car models

RC motorcycle 

MRX5 STREET BIKE ELECTRIC MOTORCYCLE RTR 


Street Bike, scale 1:5 


MRX5 Street Bike RTR 

The innovative GM-Racing motorcycle 

MRX5 Street Bike is a high-tech fun 

model on a scale of 1:5. It is delivered 

as a preassembled and 99% ready-torun 

model and is thus ready to go in 

just a short time. The true-scale model 

is just fun to operate in a parking lot or 

race course. The powerful electric motor 

accelerates the motorcycle quickly 

to top speed, and the deep center of 

gravity ensures great performance. The 

patented stabilization gyro in the rear 

wheel makes the motorcycle easy to 

master even for beginners, so they can 

be having fun after just a little practice. 

The Street Bike comes standard with a 

high-quality GM-Racing XG-6i Sport- 

Spec 2.4 GHz remote control system 

and a high-performance electronic 

speed controller. All you need to get 

started are batteries for the remote 

control and a 7.2 V NiMH or LiPo drive 

battery. 

The ultimate true-scale motorcycle on 

a scale of 1:5! Preassembled, 

true-scale frame chassis with 

separate panel parts. 

● GM-Racing XG-6i 2.0 FHSS Sport- 

Spec 2.4 GHz RC system with steering 

servo, speed controller, and receiver 

installed and connected 

● Front-wheel drive via absorber steering 

(oil-filled shock absorbers) 

● Castor angle on the front axle is 

adjustable for extremely fast 

reaction 

● Powerful electric propulsion 

system with 540 motor and 

electronic speed controller 

● Front wheel fork with long 

suspension travel for the 

best riding characteristics 

● Removable and adjustable 

roll bars for beginners 

and advanced riders 

● Adjustable, pre-filled oilfilled 

shock absorbers on 

the real axle 

● Power transmission to rear wheel via 

stable metal chain 

● High-traction knobby off-road tyres 


ball bearings 

● Panels and available in five different 


RC functions 

Right/left 

Forward/brake 

Specification 

Scale 1:5 


Width 110 mm 







Available under order no. 90191.XX und 






LiPo battery 20C 2/4000 7.4V Stick P.JST/G2 98999 1 




Riding with the MRX5 Street Bike 

adds a new dimension to the area of 

RC motorcycles. Never before was a 

remote controlled motorcycle so easy 

to master. This is made possible by 

the patented gyro system in the rear 

wheel. Ideal for any beginner in the 

area of motorcycles. 

82 83 


Car models

RC motorcycle 

MRX5 STREET BIKE, ELECTRIC MOTORCYCLE ARTR 

Order No. 90191.ARTR 

Street bike, scale 1:5 

Order No. 90191.ARTR 

MRX5 Street Bike ARTR 


MRX5 Street Bike is a high-tech fun 

model on a scale of 1:5. It is delivered 

as a preassembled and almost-readyto-run 

model and is thus ready to go in 

just a short time. The true-scale model 

is just fun to operate in a parking lot or 

race course. 

For ambitious model builders, the 

ARTR variant with brushless motor, as 

well as remote control and speed controller, 

is the ideal start in the world of 

RC motorcycles. The enormous torque 

of the brushless motor and the high top 

speed guarantee maximum operating 

fun. The patented stabilization gyro in 

the rear wheel and the low centre of 

gravity make the motorcycle easy to 

master even for beginners, so they can 

be having fun after just a little practice. 

The ultimate true-scale motorcycle on a 

scale of 1:5! Preassembled, true-scale 

frame chassis with separate panel 

parts 



● Castor angle on the front axle is adjustable 

for extremely fast reaction 

● Brushless motor for maximum performance 

● Front wheel fork with long suspension 

travel for the best riding characteristics 

● Removable and adjustable roll 

bars for beginners and advanced 

riders 

● Adjustable, pre-filled oil-filled 

shock absorbers on the real 

axle 

● Power transmission to rear 

wheel via stable metal chain 

● High-traction knobby offroad 


● Completely equipped with 

high-quality ball bearings 

● Panels and available in 5 different 


RC functions 

Right/left 

Forward/brake 

Specification 

Scale 1:5 









Available under order no. 90191.XX and 


Online Shop at www.graupner.de. 



XG-6i 2.0 FHSS Race-Spec 2,4 GHz 94004 1 


Digital-Servo DES 804 BB 7950 1 

GM-GENIUS 90 BRUSHLESS + BRUSHED 97164 1 





With the MRX5 Street Bike electric 

motorcycle in the ARTR variant with 

brushless motor, you can equip the 

model individually just as you like. 

Just install your own RC system and 

the brushless speed controller. Add 

your own battery and off you go. 

Plenty of pure riding fun with the standard 

built-in gyro in the real axle. 

84 85 


Car models

RC motorcycle 

MRX5 STREET BIKE RACE VERSION 


Street Bike, scale 1:5 



MRX5 Street Bike „Race Version“ is a 

high-tech model on a scale of 1:5. It is 

delivered as a preassembled and is 

thus ready to go in just a short time. 

For ambitious model builders or for 

competition, the RACE variant is the 

ideal RC motorcycle. The model is delivered 

without motor, speed controller, 

or remote control. The RACE version is 

already equipped with a number of tuning 

parts, such as the aluminium front 

wheel fork or slipper. The light spoked 

wheel rims without stabilization gyro in 

the rear wheel and the low centre of 

gravity ensure great handling and super 

performance. 

The ultimate true-scale motorcycle on a 

scale of 1:5! Preassembled, true-scale 

frame chassis with separate panel 

parts 



● Castor angle on the front axle is adjustable 

for extremely fast reaction 

● Aluminium front wheel fork with long 

suspension travel for the best riding 

characteristics 

● Removable and adjustable roll bars 

for beginners and advanced riders 

● Adjustable, pre-filled oil-filled shock 

absorbers on the real axle 

● Power transmission to rear wheel via 

stable metal chain 

● Light spoked wheel rims without stabilization 

gyro 

● Adjustable slip clutch 


ball bearings 

● Panels and available in five different 


Specification 

Scale 1:5 






RC functions 

Right/left 

Forward/brake 







XG-6i 2.0 FHSS Race-Spec 2,4 GHz 94004 1 

BRUSHLESS GM PRO 5.5T star wound metal 97285.5 1 



Digital-Servo DES 804 BB 7950 1 

GM-GENIUS 90 BRUSHLESS + BRUSHED 97164 1 




The MRX5 Street Bike Race Version 

ist the variant for the motorcycle pro. 

Without electronic system, without 

gyro system, but equipped with a 

number of important tuning parts for 

use in tough competition. Without the 

gyro system, it is substantially more 

difficult to steer but also offers more 

agile handling. The weight of the Race 

Version is reduced by the weight of 

the gyro system. However, for more 

difficult racing conditions, it can be 

retrofitted at any time. 

The frame of the Race Version 

86 87 


Car models

Radio control system 

XG-6i 2.0 FHSS SPEC radio control system 2.4 GHz 


3-channel radio control system 2.4 GHz 


XG-6i 2.0 FHSS SPORT SPEC 2.4 

GHz 3-channel remote control 

system 

The new XG-6i 2.0 FHSS SPORT 

SPEC 3-channel remote control from 

GM-Racing offers reliable 2.4-GHz 

technology at an unbeatable price/ 

performance ratio. 

The Sport version is very easy to 

operate and still has all the settings 

needed by hobby racers. The FHSS 

hopping technology has made it 

possible to further improve transmission 

reliability and range. The new 

3-channel micro receiver can fit in 

every model without any problem. 

All the important controls are placed 

optimally on the ergonomically designed 

transmitter housing, so that settings 

can be changed even during 

operation. 

● 2.4-GHz FHSS system no longer 

requires quartz or channel settings 

● Impervious to interference from 

electric motors or electric charges 

(metal noise) 

● Extremely short transmitter aerial 

● Ultra-fast transmission rate 

Functions: 

● Digital trimming for gas and steering 

with LED display 

● 2 proportional channels and one 

switching channel (AUX) 

● Programmable failsafe function 

● Servo reverse for gas and steering 

● Servo end point (EPA) from 0 - 100% 

● Servo travel setting adjustable from 

20 - 120 % 

● Transmitter low-voltage warning with 

alarm signal 

● Transmitter charging jack 

● Soft rubber steering wheel for 

precise control 

Receiver RX XG-6i 2.0 FHSS 

2,4 GHz 

The sets included 

Sender, receiver 2.4 GHz 

The remote control system is delivered 

without any other accessories, such as 

servos or switching cables, so that you 

can put together your desired components 

depending on the intended purpose 

(electric or gas model). 

Special accessory, aluminium case, 

order no. 94004.1 

Specification 

Operating voltage 8,7 - 12 V 

Frequency 2400 MHz 

Modulation FHSS 

Control function 3, incl. 1 switched 

Charging rate ca. 150 mA 

Temperature range 0 -70 °C 

Aerial length 


55 mm 


94002.1 RX XG-6i 2.0 FHSS Receiver, 3 channels 



Aluminium case for XG radio systems 94004.1 1 



Charge lead for Futaba R/C transmitter 3022.65 1 


Combustion models 



IB 5N-1600 NiMH JR 2/3A receiver battery 8716.5 1 

Power supply cable with charger connection 3934.3 1 



Electric models 



88 89 

R/C systems and accessories


XG-4i 2.0 FHSS RACE SPEC computer system 2.4 GHz 


2-channel radio control system 


The new XG-4i 2.0 FHSS RACE SPEC 

2-channel remote control from GM-Racing 

offers reliable 2.4-GHz technology 

at an unbeatable price/performance ratio. 

The easy-to-read LCD display and 

many practical setting options make it 

ideal for the ambitious racer. The FHSS 

hopping technology has made it possible 

to further improve transmission reliability 

and range. The new 3-channel 

micro receiver can fit in every model 

without any problem. 




can be changed even during operation. 

● 2.4-GHz FHSS system no longer requires 

quartz or channel settings 

● Impervious to interference from electric 

motors or electric charges (metal 

noise) 

● Short foldable transmitter aerial 


Functions 

● Large, easy-to-use LCD data monitor 

● 16 model memories (with model names 

and copy function) 

● 2 proportional channels 

● 4-key terminal for programming all 

parameters 

● Programmable failsafe function 

● Servo reverse 

● Servo end point (EPA) for all channels 

● Servo travel setting (dual rate) for the 

steering servo 0 - 120 % 

● Subtrim and expo setting for gas 

and steering servo 

● Brake mixing function for large models 

● Anti-blocking system (ABS) for the 

gas servo 

● Adjustable speed for the gas and 

steering servo 

● Auto-start function (ATS) 

● Throttle hold for the gas servo 

● Integrated up or down timer 

● Transmitter low-voltage 

warning with alarm signal 


● Soft rubber steering 

wheel for precise control 

The set contains 

Sender, receiver 2.4 GHz 

The remote control system is delivered 

without any other accessories, such as 

servos or switching cables, so that you 

can put together your desired components 

depending on the intended purpose 

(electric or gas model). 

16 model memories 

2,4 GHz 

Special accessory, aluminium 

case, order no. 94004.1 

Receivers RX XG-6i 2.0 FHSS 

Large, clearly arranged LCD data monitor 

Servo end-point adjustment (EPA) for all channels 

Servo travel adjustment (Dual Rate) for the 


Sub-trim and Expo settings for throttle and steering servos 

Sixteen model memories (with model name and copy function) 

Variable transit speed for throttle and steering servos 

Throttle hold for the throttle servo 

Brake mixer function for large-scale models 

Integral count-up or count-down timer 

Specification 




Control function 2 


Temperature range 0 - 70 °C 

Aerial length 110 mm 










Servo HBS 790 BB, MG low profile 7987 1 




Servo HBS 870 BB, MG 7991 1 






94000.6 Transmitter aerial 2.4GHz for XG-6i 


90 91 



XG-6i 2.0 FHSS RACE SPEC computer system 2.4 GHz 


3-channel radio control system 


The new XG-6i 2.0 FHSS RACE SPEC 

3-channel remote control from GM-Racing 

offers reliable 2.4-GHz technology 

at an unbeatable price/performance ratio. 

The easy-to-read LCD display and 

many practical setting options make it 

ideal for the ambitious racer. The FHSS 

hopping technology has made it possible 

to further improve transmission reliability 

and range. The new 3-channel 

micro receiver can fit in every model without 

any problem. 




can be changed even during operation. 

● 2.4-GHz FHSS system no longer 

requires quartz or channel settings 

● Impervious to interference from 

electric motors or electric charges 

(metal noise) 

● Short foldable and removable 

transmitter aerial 


Functions 

● Large, easy-to-use LCD data monitor 

● 16 model memories (with model 

names and copy function) 

● 2 proportional channels and one 

switching channel (AUX) 

● 4-key terminal for programming all 


● Programmable failsafe 

● Servo reverse 

● Servo end point (EPA) for all 

channels 

● Servo travel setting (dual rate) for the 

steering servo 0 - 120 % 

● Subtrim and expo setting for gas and 


● Brake mixing function for large 

models 

● Anti-blocking system (ABS) for the 

gas servo 

● Adjustable speed for the gas and 


● Auto-start function (ATS) 

● Throttle hold for the gas servo 

● Integrated up or down timer 

● Transmitter low-voltage 

warning with alarm signal 


● Soft rubber steering wheel 

for precise control 

The set contains: 

Transmitter, receiver, 2.4 GHz 

The radio control system is supplied 

without additional accessories such as 

servos or switch harness, so that you 

can select components appropriate to 

your particular application 

(electric or glow-powered model). 


2,4 GHz 

Special accessory, aluminium 

case, order no. 94004.1 

Receivers RX XG-6i 2.0 FHSS 

Large, clearly arranged LCD data monitor 

Servo end-point adjustment (EPA) for all 

channels 

Throttle hold for the throttle servo 

Specification 




Control function 3, davon 1 Schaltkanal 


Temperature range 0 - 70 °C 




94000.6 Transmitter aerial 2.4GHz for XG-6i 


Servo travel adjustment (Dual Rate) for the 


Sub-trim and Expo settings for throttle and steering servos 

Sixteen model memories (with model name and copy function) 

Brake mixer function for large-scale models 










Servo HBS 790 BB, MG low profile 7987 1 




Servo HBS 870 BB, MG 7991 1 




92 93 



MX-12 Graupner HoTT Computer system 2.4 GHz 



With 6 control functions, the mx-12 

HoTT lets the advanced RC model builder 

to control numerous models. The 

use of Graupner HoTT 2.4-GHz transmission 

technology ensures great functional 

reliability through bidirectional 

communication between transmitter 

and receiver, with integrated telemetry 

and ultrafast response times. 

The transmitter has 10 model memories. 

Programming by keys. A contrastrich, 

8-line, blue-lit graphic display ensures 

perfect display of all setting 

parameters and telemetry data. Telemetry 

data and additional model memories 

can be stored on a micro-SD 

memory card. 

The channel signal is resolved at 12 bits 

in 4096 steps, thus providing extremely 

sensitive control. 

3-pole serial connection for USB adapter 

#7168.6 for reading out and storing 

model memories and for firmware upgrades. 

Voice output via headphone output is 

available as an option. 

● Microcomputer remote control 

system with state-of-the-art 2.4 

GHz Graupner HoTT technology 

● Bidirectional communication between 

transmitter and receiver 

● 5 different languages (German, 

English, later French, Italian, and 

Spanish) possible via software update. 

For availability of the respective 

language, see Download area. 

● Servo cycle times of 10ms can 

be selected for digital servos 

● Ultrafast response times through 

direct transmission of the data 

from the main processor to the 

2.4-GHz transceiver with reliable 

transmission. No additional delays 

through detours via a module processor 

● Short aerial, foldable 

● Operation and programming 

based on the proven concepts of 

mc-19 to mc-24 

● A contrast-rich, 4-line, blue-lit 

graphic display ensures perfect 

control of settings and parameters 

such as model type, model memory, 

clocks, and operating voltage 

● 6 control functions 

● Free assignment of all switches 

● 10 model memories 

● 4 switches/keys, including 2 

3-stage-switches, 1 2-stage switch, 

1 key 

● Modes 1 to 4 are freely selectable 

● Key lock function to prevent unintentional 

operation 

● Display change from main menu 

to telemetry main menu using 

the ESC key 

● Numerous telemetry display, 

programming, and analysis 

functions directly in the 

transmitter display 

● 3 flight phases can be programmed 

● Extensive programmes for 

fixed-wing and helicopter 

models 

● Swashplate limiter 

● Servo travel adjustment: 

can be set separately for all 

servo channels and for 

each final value 

● Sub-trim to set the neutral 

position of all servos 

● 2-stage expo/dual-rate 

system, individually adjustable, 

can be switched 

during flight 

● Mixer functions Programmable 

failsafe function 

»Hold« or »Advance to 

pre-set positions« adjustable 

separately for each 

individual servo channel 

● Stop watches / countdown 

timers with alarm 

function 

● Model copy function for 

model memories 

The set includes: 

Graupner HoTT mc-12 microcomputer 

telemetry transmitter with built-in NiMH 

1500 mAh transmitter battery, Graupner 

HoTT GR-12 receiver, and 100mA 

transmitter charger 


6 control functions 

Internal telemetry 

General HoTT features: 

● Simple, extremely fast binding 

● Range test and warning function 

● Low-voltage warning 

● Extremely broad receiver operating 

voltage range from 3.6 V to 8.4 V 

(functional to 2.5V) 

● Failsafe, free channel allocation 

(channel mapping); mixer functions 

and all servo settings can be programmed 

simply with the HoTT- 

Smartbox 

● Binding of any number of receivers 

for channel expansion (max. of 32 

channels) 

● Up to 4 servos can be controlled simultaneously 

as a block with a signal 

repetition time of 10 ms (only digital 

servos!) 

● Maximum immunity to interference 

through optimised frequency hopping 

and broad channel spread 

● Intelligent data transmission with correction 

function 

● Extremely fast rebinding, even at 

max. distance 

● Telemetry analysis in real time 

● Over 200 systems can be used simultaneously 

● Future-proof through update capability 

via USB interface 

Specification 

Dimensions (LxWxH) 190 x 175 x 115 mm 

Operating voltage 3,4 ... 6.0 V 

Frequency 2400 ... 2484,5 MHz 


Range approx. 4000 m 

Charging rate 150 mA 

Temperature range -15 ... 55 °C 

Aerial length 120 mm 



2498.4FBEC 4NH-2000 RX RTU flat format 



Transmitter batteryflat LiPo 1S2P/60003.7V TX 33000.1 1 

Proportional rotarymodule for mx-12 #33112 33001.13 1 

Teacher/Pupil connector for mx-12 HoTT 33001.70 1 

Speech output module for mx-12 HoTT 33001.71 1 

Receiver GR-12 Graupner HoTT 33506 1 

Receiver GR-12S Graupner HoTT 33505 1 



SMART-BOX Graupner HoTT 33700 1 

GPS/Vario Module Graupner HoTT 33600 1 

Vario Module Graupner HoTT 33601 1 

General Engine Module Graupner HoTT 33610 1 

General Air Module Graupner HoTT Vario 33611 1 

Temperature 120°C, Voltage Sensor Graupner HoTT 33612 1 

Temperature 200 °C, voltage sensor Graupner HoTT 33613 1 

Fuel Sensor GRAUPNER HoTT 33614 1 

RPM Optic Sensor GRAUPNER HoTT 33615 1 

RPM Magnet sensorGraupner HoTT 33616 1 

Electric Air Module Graupner HoTT 33620 1 

Safety switch, single-pole 33001.1 1 

Switch triple-pole,short 33001.10 1 

Proportional rotarymodule 33001.11 1 

Proportional sliding controller 33001.12 1 

Safety switch, double-pole 33001.2 1 

Switch, single-pole, long 33001.20 1 

Switch, single-pole, short 33001.21 1 

Switch, two-pole, long 33001.22 1 

Switch, two-pole, short 33001.23 1 

Switch, triple-pole, short 33001.24 1 

Switch, single-pole, 3 functions, long 33001.25 1 

Switch, single-pole, 3 functions, short 33001.26 1 

Switch, two-pole, 3functions, short 33001.27 1 

Safety switch, triple-pole 33001.3 1 

Moment button long,single-pole, self-neutral. 33001.31 1 

Switch moment button, long, single-pole, self-neutralised 33001.33 1 

Security switch, single pole 33001.4 1 

Switch moment button for 2 channels, long, self-neutralised 33001.44 1 

Security switch, two-pole 33001.5 1 

94 

95 



MX-16 Graupner HoTT Computer System 2.4 GHz 




enables the advanced RC model builder 

to control nearly any model. The 





and receiver, with integrated telemetry, 

voice output via headphone output, 



Programming through simplified 

programming technology with touch 

switches. A contrast-rich, 8-line, blue-lit 

graphic display ensures perfect display 

of all settings, parameters, and telemetry 

data. Telemetry data and additional 

model memories can be stored on a 

micro-SD memory card. 




USB connector to read out and store 

model memories and for firmware upgrades. 























● A contrast-rich, blue-lit graphic 

display ensures perfect control of 

settings and parameters such as 

model type, model memory, clocks, 

and operating voltage 





3-stage-switches, 3 2-stage switches, 

2 keys, 3 analogue switches 

already installed 


● CAP-TOUCH key with key lock 

function to prevent unintentional 

operation 

● CAP-TOUCH display change 

from main menu to telemetry 

main menu using the ESC key 



functions directly in the transmitter 

display 



fixed-wing and helicopter models 



can be set separately for all 

servo channels and for each 

final value 





can be switched during 

flight 



»Hold« or »Advance to preset 

positions« adjustable separately 

for each individual 

servo channel 

● Stop watches / countdown 

timers with alarm 

function 

● Model copy function for 

model memories 

20-model memories 

The set includes 



2000 mAh transmitter battery, Graupner 



Voice output 














Smartbox 



channels) 




servos!) 





function 


max. distance 





Specification 


Operating voltage 3,4 ... 6,0V V 





Temperature range - 15 ... 55 °C 










































96 

97 



MX-20 Graupner HoTT Computer System 2.4GHz 




HoTT lets the advanced RC model builder 

to control nearly any model. The 





and receiver, with integrated telemetry, 

voice output via headphone output, 



Simplified programming using 

touch keys. A contrast-rich, 8-line, 

blue-lit graphic display ensures perfect 

display of all setting parameters and telemetry 

data. Telemetry data and additional 

model memories can be stored 

on a micro-SD memory card. 




USB connection for reading out and 

storing model memories and for firmware 

upgrades. 























● A contrast-rich, blue-lit graphic 

display ensures perfect control of 

settings and parameters such as 

model type, model memory, clocks, 

and operating voltage 





3-stage-switches, 3 2-stage switches, 

2 keys, 3 analogue switches 

already installed 


● CAP-TOUCH key with key lock 

function to prevent unintentional 

operation 

● CAP-TOUCH display change 

from main menu to telemetry 

main menu using the ESC key 



functions directly in the transmitter 

display 

● Voice output can be called up 

via freely programmable 

switches 



fixed-wing and helicopter models 


● Voith-Schneider limiter, 

similar to a swashplate limiter 

● Door Sequencer e.g. to 

automatically extend landing 

gear or operate flap 

drives with process control 


can be set separately for 

all servo channels and 

for each final value 





can be switched during 

flight 



»Hold« or »Advance to preset 

positions« adjustable separately 

for each individual servo channel 

● Stop watches / countdown timers 

with alarm function 

● Model copy function for model 

memories 




Voice output 




2000 mAh transmitter battery, Graupner 



Specification 


Operating voltage 3,4 ... 6.0 V 





Temperature range -15 ... 55 °C 
















Smartbox 



channels) 




servos!) 





function 


max. distance 










































98 

99 



Display mx-12, mx-16, mx-20 

Telemetry receiver 

Graphical display of signal strength, signal quality, 

receiver temperature, receiver voltage. 

Servo display 

Simultaneous graphical and numeric display of servo 

positions in real time permits immediate visual check 

of your programming. 

Fixed-wing mixer 

Depending on the model type selected and the servo 

configuration that is set, the possible pre-mixed 

programmes are activated automatically and can be 

set individually. 

Basic system display for fixed-wing model 

Normal display that appears after the HF-ON/OFF 

process. Battery voltage / charging state, model type, 

model memory, and model name are displayed. 

Basic setting for model (fixed-wing model) 

Model name, steering arrangement mode 1 - 4, motor 

on K1, tailplane type, airfoil type. 

Swashplate mixer 

Precise setting options for pitch, roll, and pitch axis 

mixers. 

Function selection menu 

All setting options are arranged clearly depending on 

the model type selected. 

Model memory selection menu 

Clearly organized management of model memories is 

possible by name and symbol. 

Dual-rate & exponential (fixed-wing model) 

Dual-rate and exponential setting programmes with 

separate setting optons for ailerons, elevators, rudder. 

Flight phase trim 

For each active flight phase it is possible to adjust the 

trim precisely. 

Transmitter settings menu 

The control elements available but not needed in the 

basic transmitter, such as switches and proportional 

transmitter, can be programmed simply as transmitter 

elements. 

Programmable pitch curve 

3 adjustable curve base points meke it possible to 

adjust nearly every control characteristic. 

Free mixer 

The universally programmable mixers make it possible 

to program various special functions. 

Basic settings for model (surface model) 

- Part 3 - 

Clock, phase 2 - 4, teacher pupil. 

Basic settings for model (helicopter model) 

- Part 1 - 

Model name, arrangement of controls modes 1 - 4, 

swashplate settings. 

Helicopter mixer 

Flight-phase-dependent setting of gas, pitch, and rear 

rotor, as well as gyro sensitivity. 

Servo settings menu 

All servo settings for the servos, such as servo travel 

direction, center position, and servo travels, can be 

set in just one menu. 

Basic settings for model (helicopter model) 

- Part 2 - 

Programming of the switches for the flight phases. 

100 101 



mx-24 Graupner HoTT Computersystem 2.4GHz 


Professional micro-computer radio control system exploiting Graupner 2.4 GHz HoTT technology 

(Hopping Telemetry Transmission), 12 control functions 


Telemetrie with SMART-BOX 

The mx-24 is a professional microcomputer 

remote control system with stateof-the-art 

2.4-GHz Graupner HoTT 

(hopping telemetry transmission) technology 

and integrated telemetry. The 

transmitter has 40 model memories. 

The use of Graupner HoTT 2.4-GHz 

transmission technology ensures hohe 

functional reliability through bidirectional 


and receiver with the ability to connect 

a telemetry box to the transmitter. It is 

no problem to operate up to 200 transmitters 

without interference. Interference 

from electric motors, servos, and 

accumulation of electric charges (metal 

noise) are now practically impossible. 

The telemetry data can be displayed on 

the SMART-BOX. 

Functions: 

● 4-language dialog menu (German, 

English, French, Italian) 

● Ultra-fast HoTT PPM10 transmission 

for receivers in indoor models, 

fun-flyers, small helicopters, and RC 

cars, among others, which are controlled 

via a maximum of 5 servos. 

The reduced cycle time provides for 

an extremely short reaction time. 

● Swashplate limitation: This function 

limits the angle of inclination of 

the swashplate and prevents it from 

striking other mechanical parts during 

simultaneous full roll and pitchaxis 

maneuvers in 3D helicopter operations. 

● Digital trim can be set either for a 

specific flight phase or globally for 

each separate function. 

● Auto-trim function. When trimming 

fixed-wing or helicopter models, the 

current stick positions are stored in 

the trim memory at the push of a 

button. (Hit the switch, get the model 

on the »straight and level«, and release 

the stick. The correction is then 

displayed »smoothly« when the stick 

is pulled back.) 

● CH.-1-switchover for braking / 

electric motor: This expansion of 

flight phase programming makes the 

switchover child‘s play. The pilot decides 

at which stick position (forward/back) 

the motor is switched off 

or the airbrakes are retracted. 

● Automatic transmitter control 

assignment by pressing the control 

elements 

● Key lockout prevents accidental 

changes 

● 12 Control functions. Simplified 

assignment of control elements, 

such as stick, external switch, proportional 

control, and trim lever as 

control functions. As multifunctional 

aircraft, ship, or car transmitter without 

additional retrofitting of external 

switches or switching modules. 

● Future-proof thanks to updatable 

operating system 

● Backlit MULTI-DATA-GRAPHIC 

LCD monitor with significantly improved 

readability in difficult lighting 

conditions. High resolution and the 

use of grey shades ensure perfect 

monitoring and exact graphical representation 

of all kinds of curves. 

● New type switch »monitor« to 

control all switches and control switches 

● CONVENIENT MODE SELECTOR 

for simple switchover of operating 

modes 1 - 4 (e.g. throttle left/throttle 

right) 

● 3D-Cylinder rotary control in connection 

with 4 programming keys 

permit precise settings and great 

programming convenience 

● 12 mixers, freely programmable for 

fixed-wing models and helicopters 

with freely selectable input and output 

functions, including 4 curve mixers 

with the new 8-point-curve 

technology in 0.5-% steps; curve values 

are simple to set and adjust for 

a maximum of 8 points for throttle, 

pitch, tail rotor, or other nonlinear 

setting paths. The processor in the 

CPU uses a sophisticated polynomial 

approximation method to calculate 

an ideal, correctly rounded MPC 

PROFI programs and 

display backlighting 


(multi-point curve) mixer curve. 

● Shifting of the curve mixer points is 

possible in both axes with the 

control 

● 8 flight phase programs can be 

adjusted individually for each model 

and assigned names; the switching 

time can be set separately 

● SUPER SERVO menu with a perfect 

overview of all servo setting data 

and simple correction of parameters 

for 4 levels (turning direction, center 

position, bilaterally separate servo 

paths, and bilateral 

● separate travel limit for 12 servos 

with a total of 72 setting options) 

● SUPER-DUAL-RATE, EXPO, and 

EXPO/DUAL-RATE menu with 36 

possible setting variants, for 3 servo 

functions and 6 flight phases. 

● Practical, optimized multi-function 

menus for fixed-wing and helicopter 

models. Entering the number 

of aileron and cambered flap servos 

automatically programs all the required 

mixer functions in the multifunction 

fixed-wing menu. 

● Differential aileron mixer, butterfly mixer, 

dual-flap mixer, automatic gyro 

set function and additional special 

functions 

● Helicopter swashplate mixer For 

1, 2, 3, or 4-point linkage. 

● Failsafe monitor For 8 servo functions 

● PPM 10 Fast PPM modulation for 

mini-receiver in slow flyers, small helicopters, 

and RC cars 

● PPM 18 Expanded PPM modulation 

(FM and FMsss) for a maximum of 9 

servos 

● PPM 24 PPM 24 modulation for operation 

of a maximum of 12 servos 

● Help key with valuable tips for 

programming in each menu selected. 

● Convenient timer menu. 8-stopwatch 

system, alarm timer, countdown 

timer, lap counter, et cetera. 2 

times and 1 lap time can be displayed 

simultaneously in large characters. 

● Stopwatch with history: In addition 

to the lap counter, there is a 

Time 1, which records the power-on 

times and a Time 2, which records 

the switched-on and switched-off 

times separately. 

● Transmitter operating time timer 

is automatically set to zero by the 

transmitter battery charging process. 

● Switch assignment of the flight 

phase switches: Now 6 switches, 

including 2 with priority function 

The name of each switch combination 

can be selected freely. The number 

of flight phases does not depend 

on the number of flight phase switches 

● UNDO function in the copy/delete 

menu: Programming steps can 

be undone. 

● Linearization of swashplate servos: 

Electronic compensation for the 

nonlinear travel of swashplate rotary 

servos. 

● Tailplane type normal, V-tail, 

Delta/flying wing., 2 elevator servos 

3+8 (as a result 2 linkable elevator 

servos are immediately available 

without wasting free mixers/dual-mixers) 

● Number of flaps 2 ailerons/4 

cambered flaps: Full support for 6 

surface servos, now without wasting 

free mixers. 

● Switch-off capability for flight 

phase transition delay: For individual 

channels, the delay time can be 

switched on a flight phase basis (e.g. 

for motor-off for electric models or 

for head lock activation/deactivation 

for helicopters). 

● 10 Additional user-defined phase 

names: In addition to the preset 

flight phase names, users can freely 

assign 10 phase names of their own 

● Expanded transmitter control 

menu: Possible to assign input-side 

center offset for the CH.-1 control + 

trim as control. 2 switches can be 

assigned to one input for true 

3-stage function. 

● Fixed-wing mixer: Newly designed 

multi-flap menu for ultra-simple, 

easy-to-understand setup of up to 6 

wing-mounted servos on a flightphase-specific 

basis - without the 

use of free mixers 

● Sub-item »Info« in the basic model 

menu: Here it is possible to enter 

additional information for each 

model (with a maximum of 15 letters 

or characters). This additional information 

then appears in the newly designed 

model selection 

● »Logical switches«: This function 

makes it possible to link 2 switches 

logically with »and« or »or«. The result 

can then be used as a virtual switch. 

Typical example of use: Certain function 

are to be activated only depending 

on others (e.g. wheel brake can 

be activated only if the landing gear 

have been lowered). Multiple functions 

that are normally switched independently 

of one another are to be 

returned to the basic setting using an 

»emergency switch«. The automatic 

program can be activated by multiple 

switches, which then simultaneously 

select the program. 

● Display of modulation type in the 

LCD monitor 

● Expanded servo center adjustment 

range Setting range expanded 

to ±125 %. 

● Number of flight phases: (fixed 

wing: 8, helicopter: 7 + AR) 

● Warning threshold »Throttle too 

high« can be set in the helicopter 

menu, programmable power-on warning 

● Changed timer clear function: 

Even when individual timers are still 

running, the others are reset. 

● Slot time can be stopped simultaneously 

by RUN + STOP and thus 

deleted, too 

● Phase trim is now possible for 

fixed-wing models for all axes. 

● Hotkey for servo display: Pressing 

briefly on the rotary control leads display 

to the servo from nearly all the 

menus. 

● Servo assignment swap at the re- 

ceiver output 

● Rotary control enter function: A 

short pressing of the rotary control is 

interpreted as enter. In the menus 

Model Select and Function Selec 

The set contains: 

Graupner HoTT mx-24S microcomputer 

transmitter with telemetry (SMART- 

BOX), built-in NiMH RTU 2000mAh 

transmitter battery, Graupner HoTT 2.4- 

GHz FHSS module with micro SD card 

slot for storage of telemetry data, and 

earphone connection, Graupner HoTT 

GR-24 12-channel receiver. 

102 

103 



mx-24 Graupner HoTT Computersystem 2.4GHz 


Professional micro-computer radio control system exploiting Graupner 2.4 GHz HoTT technology 

(Hopping Telemetry Transmission), 12 control functions 



Interface divider for HoTT mc-19/22 andmx-22/mx-24 33305 1 

PCB telemetry 14-poles-12 pole for mx-22/24 33306 1 

Interface divider cable 175 mm, 14-poles 33309 1 
















Basic information screen 

Model name, model number, operating time, pilot‘s name, transmitter battery voltage, 

transmitter operating time since last charge, flight phase, stopwatch / alarm timer, lap 

counter. 

Switch monitor 

Overview of all external switches and control switches with socket number and display of 

switch position / switch direction and switch function at a glance. 

Specification 

Dimensions (LxWxH) 235 x 215 x 75 mm 

Operating voltage 9,6 ... 12 V 

Frequency 2400 - 2483,5 MHz 






Temperature range -15 ... + 55 °C 


Aerial foldable 



33800 Transmitter antenna HoTT for mx-12,mx-16 

Dual-Rate / Expo set-up menu 

The multi-point Dual-Rate / Exponential characteristic curve menu is used to set up 

progressive / regressive control characteristics for the aileron, elevator and rudder functions. 

Model type 

The appropriate set-up and mixer functions, plus Ch 1 Offset, are made available in the 

programming menu simply by determining the model configuration, such as tail type, number 

of ailerons and flaps. 

Flight phase set-up menu 

Each of the eight flight phases can be assigned its own name, and the timer type selected. 

The variable transition time prevents the servos moving abruptly from one position to 

another, ensuring a smooth transition between flight phases. 

Function select menu 

All the set-up menus are listed in a logical order according to the selected model type 

(fixed-wing model or helicopter), and can be called up once selected. 

Logical switches 

This function can be used to link two external switches and / or control switches using 

„AND“ or „OR“ logic. The change-over switch is selected simply by operating it. 

Stick set-up menu 

In this menu you have the opportunity to select global or phase-specific trim effect. Trim 

increments and times are individually adjustable to match the requirements of the model. 

PROFI programs and display backlighting 

Non-delayed channels 

In this menu a channel-specific suppression of the transition delay time can be programmed 

separately for each flight phase, e.g. motor off with electric models, or activate / disable 

heading-lock for helicopter gyros, etc. 

Receiver output 

In the Receiver Output set-up menu all servos 1 - 12 can be re-directed to any receiver 

outputs you wish; a practical facility for using the transmitter with different makes of receivers 

and mini-receivers generally. 

Servo set-up menu 

All servo settings, such as direction of rotation, centre offset and travel limits, are easily 

displayed and adjusted in the Servo Set-up menu. 

Servo display 

Simultaneous graphical and numerical display of all servo positions (travel, direction, centre) 

in real time, providing an accurate visual check of all twelve servo functions. 

104 105 



mc-19 HoTT Computersystem 


Micro-computer radio control system exploiting Graupner 2.4 GHz HoTT technology (Hopping Telemetry Transmission) 


Integrated Telemetry: 

The mc-19 is a profesional microcomputer 

remote control system in using 

state-of-the-art 2.4-GHz Graupner 

HoTT (hopping telemetry transmission) 

technology. The transmitter has 20 model 

memories. The use of the Graupner 

HoTT 2.4-GHz transmission technology 

ensures the highest in functional reliability 

thanks to the bidirectional communication 

between taansmitter and receiver 

with the option to connect a 

telemetry box to the transmitter. Up to 

200 transmitters can be operated simultaneously 

without interference. Interference 

from electric motors, servos, 

and electric charges (metal noise) is no 

longer possible. 

Similar to the SMART-BOX, the telemetry 

data can be displayed directly in the 

transmitter. 

● Short antenna, foldable 


English, French, Italian). 

● 20 model memories. Selectable 

modulation types: PPM 18, PPM 24. 


assignment of controls without additional 

retrofitting of external switches 

or switching modules. 

● Future-proof thanks to updatable 

operating system. 

● 3D rotary encoder in connection 

with 4 programming keys 

permit precise settings and great 

programming convenience. 

● MULTI-DATA-GRAPHIC LCD 

monitor with high resolution ensures 

perfect monitoring and exact 

graphical representation of all kinds 

of curves. 

● Real time processing (RTP), Settings 

and changes virtually in real 

time. 

● ADT (Advanced Digital Trim System). 

● CONVENIENT MODE SELECTOR 

for simple switchover of operating 


right) 

● 3 Freely programmable mixers in 

RC, aircraft, helicopter, ship, and car/ 

truck models. 

● 3 and 5-point mixer for throttle, 

pitch, tail rotor, as well as a gyro-offset 

setting available. These settings 

can be made separately for each 

flight phase. 

● Fixed-wing/helicopter: Dual Rate/ 

Expo for Ch.2-Ch.4 (switchable 

jointly for each channel. 

● Phase trim cambered flaps, ailerons, 

elevator, depending on model 

type. 

● Helicopter swashplate mixer for 

1, 2, 3, und 4-point linkage. 

● Extensive fixed-wing menu with 

12 setting programs for 2 ailerons 

and 2 cambered flaps (number of 

servos). 

● Servo travel setting for 12 servos, 

servo-reverse, servo-center, servotravel 

adjustable separately for each 

side, graphical display for all servos. 

● 2 Switch-operated timers, stopwatch 

and flight/travel time. 


● HELP KEY with tips on the programming 

menu selected at the moment. 

● Teacher/pupil system with total 

transfer; all settings are made using 

the teacher transmitter. 

● Nautical control functions for 

control of the nautical expert module. 

● Model copy function for all model 

memories 



transmitter with built-in LiPo 2800 mAh 

transmitter battery, Graupner HoTT 2.4- 

GHz FHSS module with micro SD card 

slot for storage of telemetry data, and 

earphone connection, Graupner HoTT 

GR-16 8-channel receiver. 

Specification 


Operating voltage 9,6 ... 12,6 V 


All-up weight, approx. ca. 1400 g 





Temperature range -15 ... +55 °C 
















Fuel SensorGraupner HoTT 33614 1 

RPM Optic Sensor Graupner HoTT 33615 1 





33300 Transmitter module M-G1 Graupner HoTT for mc-19/mc-22 

33801 Transmitter antennaHoTT for mc-32 

23049 Holder set aerial 2.4 GHz on transmitter tray 

106 

107 



mc-19 HoTT Computersystem 



Telemetry display: 

Transmitter module HoTT 

Telemetry display receiver: 

Signal quality, signals strength, temperature, receiver voltage 

Power-on menu 

For the model selected in the memory, with display of memory number, model name, 

operating voltage and function menu. 

Basic model settings 

Model name, stick MODE 1 - 4, modulation, swashplate type, 1 - 4 servos. 

Telemetry display receiver: 

Failsafe setting and channel mapping 

Telemetriedisplay General Sensor #33611: 

Spannungssensor 1 

Model memory select menu: 

Up to twenty models can be managed according to memory number; names can be 

assigned to model memories. 

Function menu select process 

For simple programming of remote-controlled fixed-wing model aircraft, helicopters, boats, 

cars and trucks. 

Modulation select 

Programming the Ch1 function, tail type (normal / V-tail), number of aileron and flap servos. 

Automatic switch assignment 

Through single operation of desired switch. 

Modulation select 

Programming the Ch1 function, tail type (normal / V-tail), number of aileron and flap servos. 

Super-servo menu for twelve servos: 

Servo direction, centre position and servo travels, symmetrical or asymmetrical, ultra-simple 

programming in a single menu. 

Fixed-wing mixer settings: 

Twelve linking and adjustment options for aileron / rudder, aileron / flap, brake / elevator, 

brake / flap. 

Nautic facility: 

New type of select system provides many switching facilities. 

Fixed-wing mixer settings: 

Brake / flap, brake / aileron, elevator / flap. 

HELP menu 

Important hints and tips regarding programming and use for every program setting; 

dedicated Help menu can be called up. 

108 109 



MC-22 Graupner HoTT Computersystem 2,4GHz 




Integrated telemetry: 

The mc-22 is a professional microcomputer 

remote control system using 

state-of-the-art 2.4-GHz Graupner 

HoTT (hopping telemetry transmission) 

technology.The use of Graupner HoTT 

2.4-GHz transmission technology ensures 

great functional reliability through 

bidirectional communication between 

transmitter and receiver with the ability 

to connect a telemetry box to the transmitter. 

The transmitter has 30 model 

memories. It is no problem to operate 

up to 200 transmitters without interference. 

Interference from electric motors, 

servos, and accumulation of electric 

charges (metal noise) is now 

practically impossible. 

The telemetry data can be displayed directly 

in the transmitter, similar to the 

SMART-BOX. 


English, French, Italian) 

● 30 model memories. Selectable 

modulation types: PPM 18, PPM 

24 


assignment of controls 

such as joystick, external 

switches, 

proportional control, 

and trim lever 

as control 

functions 

● Futureproof 

thanks to 

updatable 

operating 

system 

● 3D rotary 

encoder in 

connection with 

4 programming keys 

permit precise settings and 

great programming convenience 

● MULTI-DATA-GRAPHIC LCD monitor 

with high resolution ensures 

perfect monitoring and exact graphical 

representation of multipoint curves 

for gas, pitch, tail rotor, EXPO/ 

DUAL rate, and mixer 

● 6 Freely programmable mixers 

● Real time processing (RTP), Set- for gliders and powered aircraft, 3 in 

tings and changes virtually in real the helicopter progrm, including 2 

time 

curve mixers each with 5-point 

● ADT (Advanced Digital Trim System) curve mixer adjustable in 1% steps 

for all 4 joystick trim functions with ● 3 and 5-point mixer for throttle, 

quick adjustment of gas/idle trim pitch, tail rotor, as well as a gyro- 

● CONVENIENT MODE SELECTOR offset setting available. These 

for simple switchover of operating settings can be made separately 


right) 

for each flight phase 

● The throttle and pitch curves available 

in the Helicopter-Menu are 

equipped with a Multi-Point-Curve- 

System (MPC). A sophisticated polynomial 

approximation method is 

used to create an ideally rounded 

curve form from the mixer base 

points. 

● 2-level Expo/Dual Rate system, adjustable 

individually, can be switched 

during flight, can be adjusted separately 

for each model 

● Phase trim cambered flaps, ailerons, 

elevator, depending on model 

type 

● Helicopter swashplate mixer for 

1, 2, 3, and 4-point linkage 

● Extensive fixed-wing menu with 

12 setting programs for 2 ailerons 

and 2 cambered flaps (number of 

servos) 

● Servo travel setting for 12 servos, 

servo-reverse, servo-center, servotravel 

adjustable separately for each 

side, graphical display for all servos 

● 2 Stopwach/countdown timer 

with alarm function 

● Operating time, available for each 

model separately 

● HELP KEY with tips on the programming 

menu selected at the moment 

● Teacher/pupil system with total 

transfer; all settings are made using 

the teacher transmitter 

● Model copy function for all model 

memories 



transmitter with built-in LiPo 2800 mAh 

transmitter battery, Graupner HoTT 

2.4GHz FHSS module with micro SD 

card slot for storage of telemetry data 

and earphone connection, Graupner 

HoTT GR-24 12-channel receiver. 














Fuel SensorGraupner HoTT 33614 1 

RPM Optic Sensor Graupner HoTT 33615 1 



Specification 




All-up weight, approx. ca. 1400 g 




Temperature range -15 ... +55 °C 





33300 Transmitter module M-G1 Graupner HoTT for mc-19/mc-22 

33801 Transmitter antennaHoTT for mc-32 

23049 Holder set aerial 2.4 GHz on transmitter tray 

110 



HoTT Sender 

MC-22 Graupner HoTT Computersystem 2,4GHz 



Start display for receiver voltage 

Telemetry display with general sensor #33611: 

Individual cell voltages 

Basic model settings 

Basic model pre-sets such as model name, stick mode, modulation, digital trim increment 

size. 

Entering the model name or the owner‘s name 

All the characters shown here are available for selection as part of the model name or the 

owner‘s name. This provides a clear overview of your models, and makes it easy to arrange 

and manage a selection of models. 

Telemetry display with Vario #33611 

Telemetry display with general sensor #33611: 

Adjustment of warning threshold for minimal cell voltage 

Model type 

Simply by establishing the basic model configuration, such as tail type and number of wing 

flaps, the programming menu automatically includes all the appropriate functions. 

Transmitter control set-up menu 

Any control elements present on the basic transmitter which are not required for a specific 

model - such as switches and proportional controls - can easily be 

programmed as transmitter controls. 

Switch overview 

The function of all external switches and control surfaces is displayed in real time. This 

overview provides an easy means of tracking down errors such as duplicated assignments 

or programming errors. 

Basic general settings 

Owner‘s name, default stick mode, pre-set modula-tion, expert mode. 

Servo display 

A simultaneous graphic and numerical display of all servo positions in real time provides an 

immediate visual check. 

Multi-Point Dual-Rate / Exponential characteristic curves 

Separately adjustable for the aileron, elevator and rudder functions, with progressive or regressive 

control characteristics. If a switch is assigned, set-up values can also be switched 

separately in flight. 

Menu suppression 

The selection of functions within the program can be made more comprehensible by 

suppressing programming menus which are not required for a specific model. 

Fixed-wing mixer menu 

The available ready-made mixer programs are activated according to the selected model 

type and the set servo configuration, and can then be selected and set up individually. 

Receiver output 

In this menu you can digitally assign any servo to a different receiver output. 

Timer menu 

Comprehensive timer program with versatile adjustment facilities such as stopwatch, countdown 

timer with user-variable alarm warning system, plus model timer and flight timer. 

112 113 


R/C accessories 

HoTT Modules 

Transmitter module M-G1 Graupner HoTT for mc-19/mc-22 


● Transmitter module for mc-19 and mc-22 

● Connection for SMART-Box #33700 

● Earphone connection for vario beeps 

● Micro-SD card slot for recording telemetry data 

● Installation of the HF module beneath the 35-MHz or iFS module, so that both 

the HoTT module and another module can be installed in the transmitter and 

switched with the aid of HF switch #33303. 

TX module for mx-12 and mx-16 


● Transmitter module for mx-12 and mx-16 


Specification 

Type Transmitter module M-G1 Graupner TX module for mx-12 and mx-16 Transmitter module M-G2 Graupner HF switch 35MHz/iFS/Weatronic-HoTT 

HoTT for mc-19/mc-22 

HoTT for mx-22, mx-24, mc-24 

Order No. 33300 33301 33302 33303 

Dimensions (LxWxH) mm 64 x 60 x 21 45 x 89 x 11 (21) 48,5 x 63,5 x 25 38 x 23 x 50 

Operating voltage V 7,0...12,6 7 ... 12,6 7,0 ... 12,6 

Frequency MHz 2400 ... 2483,5 2400 ... 2483,5 2400 ... 2483.5 

All-up weight, approx. g 35 15 41 14 

Modulation 2.4GHz FHSS FHSS FHSS 

Range approx. m 4000 4000 4000 

Charging rate mA 100 100 100 

Temperature range °C -15 ... +70 -15 ... +70 - 15 ... +70 

Aerial length mm 110 ca. 125 100 

Transmitter module M-G2 Graupner HoTT for mx-22, mx-24, mc-24 


● Transmitter module for mx-22, mx-24, and mc-24 


● Earphone connection for vario beeps 

● Micro-SD card slot for recording telemetry data 



Interface cable fortelemetry 14 poles/JR/mc19/22, mx-22/24 33304 1 

Interface divider for HoTT mc-19/22 andmx-22/mx-24 33305 1 

PCB telemetry 14-poles-12 pole for mx-22/24 33306 1 

Telemetry cable for#33305 mini-JSTfor mc-19/mc-22 33307 1 

Interface divider cable 175 mm, 14-poles 33309 1 

HF switch 27-41MHz / iFS / Weatronic-HoTT 


HF module with safety switch with green and yellow LED to display the active module. 

Both the operating voltage and the PPM signal are switched with the safety 

switch, so that only one module is transmitting and consuming electrical power. 

The followiong combinations are possible: 

HoTT - Weatronic 

HoTT - iFS 

HoTT - 27/35/40/41 MHz 

iFS - Weatronic 

iFS - 27/35/40/41 MHz 

Weatronic - 27/35/40/41 MHz 




HoTT Receiver 

Receiver GR-12S Graupner HoTT 


The GR-12S receiver can control up 

to 6 servos 

Receiver GR-12 Graupner HoTT 


The GR-12 receiver can control up 

to 6 servos 

With the GRAUPNER HoTT 2.4 GHz 

technology, the receiver has a new 

hopping telemetry transmission highfrequency 

unit with state-of-the-art 

components and the latest software. 

Without additional sensor systems, the 

parameters receiver voltage and temperature, 

as well as signal strength are 

transmitted. 

● The use of up to 75 channels ensures 

extreme operating reliability and 

immunity to external interference. 

● The broad reception voltage range of 

3.6 V - 8.4 V (functional to 2.5 V) ensures 

full functionality even when voltage 

fluctuates. 

● Two LEDs signal operating status. 

● The sizes and weights have been reduced. 

● Receiver input sensitivity and thus 

the range have been increased 

further. 

● Failsafe, hold, OFF, and standard 

(channel 1 failsafe; all others hold) 

programmable. 

Functions with SMART-BOX: 

● 3 mixers programmable 

● Linear, degressive, and exponential 

programming of servo curves 

● Telemetry connection instead of a 

servo possible on channel 5 

● SUM signal programmable at the 

output of the highest channel 

● Limitation and reversal of servo travels 

also possible in receiver 

● Failsafe, hold, and OFF programmable 

individually for the servo channels 

● Warning thresholds programmable 

for undervoltage 

● Servo test function 




to 8 servos 




to 12 servos 





components and the latest software. A 

hardware antenna diversity system always 

switches to the better antenna signal 

and for transmission always uses 

the antenna that was last used for receiving. 

This ensures that the back 

channel data are always sent via the 

better-positioned antenna. Without additional 

sensor systems, the parameters 

receiver voltage and temperature, 

as well as signal strength are transmitted. 







fluctuates. 






● Servo connections in the front panel. 



programmable. 





● Sum signal programmable on channel 

12 output 






for undervoltage, excess temperature, 

and low temperature 





to 16 servos 





components and the latest software. A 

hardware antenna diversity system always 

switches to the better antenna signal 

and for transmission always uses 

the antenna that was last used for receiving. 

This ensures that the back 

channel data are always sent via the 

better-positioned antenna. Without additional 

sensor systems, the parameters 

receiver voltage and temperature, 

as well as signal strength are transmitted. 

The receiver does have 6 power inputs 

for strong servos. 

Type Receiver GR-12S Graupner HoTT Receiver GR-12 Graupner HoTT Receiver GR-16 Graupner HoTT Receiver GR-24 Graupner HoTT Receiver GR-32 Graupner HoTT 

Order No. 33505 33506 33508 33512 33516 

Dimensions (LxWxH) mm 31 x 20 x 9 36 x 21 x 10 46 x 21 x 14 46 x 31 x 14 63 x 30 x 14 

Operating voltage V (2,5) 3,6 ... 8,4 (2,5) 3,6 ... 8,4 (2,5) 3,6 ... 8,4 (2,5) 3,6 ... 8,4 

Frequency MHz 2400 ... 2483.5 2400 ... 2483.5 2400 ... 2483.5 2400 ... 2483,5 2400 ... 2483,5 

All-up weight, approx. g 4 7 12 16 24 

Modulation 2.4 GHz FHSS 2.4 GHz FHSS 2.4 GHz FHSS 2.4 GHz FHSS 2.4 GHz FHSS 

Range approx. m 500 2000 4000 4000 5000 

Charging rate mA 35 70 70 70 140 

Temperature range °C -15 ... +70 -15 ... +70 - 15...+70 -15 ... +70 -15 ... 70 

Aerial length mm 1 x wire 145 (aerial 30) 1 x wire 145 (aerial 30) 2 x wire 145 (aerial 30) 2x wire 145 (aerial 30) 4 x wire 145 (aerial 30) 



Specification 







fluctuates. 






● Servo connections in the front panel. 



programmable. 





● SUM signal programmable at the 

output of the highest channel 






for undervoltage, excess temperature, 

and low temperature 




HoTT SMART-BOX 



For the Graupner HoTT 2.4-GHz transmission 

system, the SMART-BOX is 

display and programming device in 

one. Whether telemetry data are displayed 

in real time or settings have to 

be made in your HoTT system, the generous 

display with 8 x 20 characters 

facilitates easy handling. Four switches 

are available for operation. An integrated 

buzzer to sound acoustic signals 

and warning tones makes the BOX 

even more convenient to use. The attached 

installation set makes it possible 

to attach the device to the handle of the 

hand transmitter, so that it is optimally 

positioned for reading telemetry data in 

real time while you are controlling your 

model. Since the SMART-BOX can be 

updated via the USB connection, you 

always have the latest software and 

can utilize future functions. 

Telemetry data display 

● Signal quality 

● Range test 

● Receiver voltage with adjustable 

warning threshold 

● Transmitter voltage display with adjustable 


● Receiver temperature with adjustable 


Programming data display 

● Country settings 

● Servo direction reversal 

● Serval neutral position 

● Servo path 

● Servo cycle time 

● Free channel assignment (channel 

mapping) 

● Failsafe settings 

● Mixer settings 

● Servo test 

Specification 





Temperature range - 15 ... 55 °C 



33700.1 Replacement cable 

SMART BOX, 

telemetry 300 mm 

Application: SMART-BOX mounted on 

the retaining clip of the mx-16. 

Transmitter module settings menu: alarm threshold for module voltage, country 

programming: GENERAL/FRANCE, range test function. 

Telemetry data for receiver: 

Signal strength TX/RX, max. time w/o reception, receiver 

voltage, lowest receiver voltage, receiver temperature. 

Telemetry data for receiver: 

Signal strength TX, max. time w/o reception, receiver 

voltage, lowest receiver voltage, receiver temperature. 

Telemetry data (graphic display): 

GENERAL-AIR module #33611. 


Vario #33601. 



USB Interface cableGM-Genius controller 7168.6 1 

Adaptor cable USB interface /JR 7168.6A 1 















Replacement cable, smart box, telemetry100 mm 33700.2 1 


ELECTRIC AIR module #36620. 


GPS #33600. 




HoTT Modules 

General Engine Module Graupner 

HoTT 

Description: 

General sensor for Graupner HoTT receiver 

and models with internal combustion 

or electric motor. 

Functions: 

● 2x temperature and voltage measurements 

with warning thresholds for 

minimum/maximum voltage and minimum/maximum 

temperature 

● Single cell measurement with warning 

threshold for minimum voltage 

● Voltage, current, and capacity measurement 


min/max voltage, max capacity, and 

max current 

● Current limiting programmable 

● Messurment of the current with 

shunt resistors 2x 1 mOhm parallel = 

0.5 mOhm 

● RPM measurement and warning 

threshold for min/max rpm 

● Fuel measurement with warning 

threshold in 25% steps 

● Warning time can be set to: OFF, 5, 

10, 15, 20, 25, 30 seconds, always 

● Warning repeat time can be set to: 

always, 1, 2, 3, 4, 5 minutes, once 

Connections: 

● 2x temperature; optionally selectable 

from 0 to either 120°C or 200°C and 

voltage measurement to 80V DC 

● 1x rpm measurement up to 100 000 

rpm with two-blade propeller 

● 1x speed controller/ servo input, 1x 

input rpm control, 1x speed controller 

/ servo output for rpm control 

● 1x current, voltage, and capacity 

measurement up to 40A (60A for 1 s) 

and up to 30V 

● 1x single-cell monitoring for 2 - 6S lithium 

batteries (LiPo, LiIo, LiFe) 

● 1x receiver power supply input and 

output 

● 1x telemetry connection for receiver 

● 1x fuel sensor 

0%/25%/50%/75%/100% 

General Air Module Graupner HoTT 


Description: General sensor for 

Graupner HoTT receiver and models 

with internal combustion or electric motor. 

Functions: 

● Vario with altitude signals plus climb 

and drop signals as well as additional 

warning thresholds for min. altitude, 

max. altitude, climb, and drop 

speeds in two stages 

● Altitude display (- 500 ... + 3000 m) 

and storage of min. and max. altitude 



min. and max. voltage and min. and 

max. temperature 

● Individual measurement with warning 

threshold for min. voltage 


with warning threshold for 

min. and max. voltage, max. capacity, 

and max. current 



shunt resistors 2x 1 mOhm parallel = 

0.5 mOhm 

● Rpm measurement and warning 

threshold for min. and max. rpms 

● Fuel measurement with warning 

threshold in 25% steps 





Connections and Technical data 

Vario: 

● 2x temperature optionally selectable 

from 0 to 120°C or 200°C and voltage 

measurement up to 80V DC 

● 1x rpm measurement up to 100 000 

rpm with two-blade propeller 

● 1x speed controller/ servo input, 1x 

input rpm control, 1x speed controller 

/ servo output for rpm control 

● 1x current and voltage and capacity 

measurement up to 40A (60A for 1 s) 

and up to 30V 

● 1x single-cell monitoring for 2 - 6S lithium 

batteries (LiPo, LiIo, LiFe) 

● 1x receiver power supply input and 

output 


● 1x fuel sensor 

0%/25%/50%/75%/100% 

Electric Air Module Graupner HoTT 


Description: 

General sensor for Graupner HoTT receiver 

and models with electric motor. 

Functions: 

● Vario with altitude signals and climb/ 

drop signals plus additional warning 

thresholds for minimum altitude, maximum 

altitude, climb/drop speed in 

two stages 

● Altitude display (- 500 ... + 3000 m) 

and storage of minimum and maximum 

altitude 



min/max voltage and min/max temperature 

● Single cell measurement 2 ... 14S 

with warning threshold for minimum 

voltage 



Type General Engine Module Graup- General Air Module Graupner Electric Air Module Graupner GPS/Vario Module Graupner Vario Module Graupner HoTT 

ner HoTT 

HoTT Vario 

HoTT 

HoTT 

Order No. 33610 33611 33620 33600 33601 

Dimensions (LxWxH) mm 41 (48) x 44 (56) x 16 41 (48) x 44 (56) x 16 51 x 47 x 18 38 x 30 (45) x 16 23 x 17 (26,5) x 7,5 

Operating voltage V 3,6 ... 8,4 3,6 ... 8,4 3,6 ... 8,4 3,6 ... 8,4 3,6 ... 8,4 


120 121 

Specification 

min/max voltage, max capacity, and 

max current 



shunt resistors 2x 0.2 mOhm (5 W) 

parallel = 0.1 mOhm 





Connections and Technical data 

Vario: 

● 2x temperature; optionally selectable 

from 0 to either 120°C or 200°C and 

voltage measurement to 80V DC 

● 1x speed controller input, 1x speed 

controller output for single cell undervoltage 

regulation 

● 1x current, voltage, and capacity 

measurement up to 150 A (320 A for 

1 s)and up to 60 V 

● 1x single-cell monitoring for 2 - 14S 

lithium batteries (LiPo, LiIo, LiFe) 


GPS/Vario Module Graupner HoTT 


● Vario with altitude signals and 5 

climb/drop signals each 

● Additional warning thresholds for minimum 

altitude, maximum altitude, 

climb/drop speed in two stages 

● Altitude display and storage of minimum 

and maximum altitude 

● GPS with distance measurement, 

route measurement, speed display, 

display of flight direction and coordinates 





● The GPS/Vario sensor can be connected 

directly to the telemetry output 

of the receiver 

Vario technical data: 

● Altitude measurement: -500 ... 

+3000 m 

● Resolution: 0.1m 

● Sensitivity of Vario: 0.5 m / 3s, 1 m / 

3 s, 0,5 m / s, 1 m / 1 s, 3 m / s per 

ton programmable 

● Calculation of mean: 4 - 20 measurements 

per measured value can be 

programmed 

Vario Module Graupner HoTT 


● Vario with altitude signals and 5 

climb/drop signals each 

● Additional warning thresholds for minimum 

altitude, maximum altitude, 

climb/drop speed in two stages 

● Altitude display and storage of minimum 

and maximum altitude 





● The GPS/Vario sensor can be connected 

directly to the telemetry output 

of the receiver 

Technical data Vario: 

● Altitude measurement: -500 ... 

+3000 m 

● Resolution: 0.1m 

● Sensitivity of Vario: 0.5 m / 3s, 1 m / 

3 s, 0.5 m / s, 1 m / 1 s, 3 m / s per 

ton programmable 

● Calculation of mean: 4 - 20 measurements 

per measured value can be 

programmed 



HoTT sensors 

RPM Magnet sensorGraupner HoTT 


Temperature 120°C, Voltage Sensor Graupner HoTT 


● Temperature sensor 0 ... 120°C 

● Voltage measurement 0 ... 80 V 

RPM Optic Sensor Graupner HoTT 


● RPM measurement up to 100 000 U/min with two-blade propeller 

Temperature 200 °C, voltage sensor Graupner HoTT 


● Temperature sensor 0 ... 200 °C 

● Voltage measurement 0 ... 80 V 

Transmitter antennaHoTT for mc-32 


Transmitter antennaHoTT for mx-12,mx-16 


Fuel SensorGraupner HoTT 


● Fuel level measurement: 0%, 25%, 50%, 75%, 100% 

Precision fuel sensor (for petrol) 

Best. Nr. 33618 

Precision fuel sensor (for kerosene) 

Best. Nr. 33617 

Replacement cable, plug 2xJR (contact: socket) 

Order No. 33610.1 

Adaptor cable for balanacer circuit board 2-7S 

Order No. 33610.7 

Balancer adaptor cable EH 2-7S 

Order No. 33610.7EH 

Telemetry cable andOptokoppler, two-sided 

Order No. 33620.1 

122 

123 


Servos and accessories 

Hochvolt-Brushless-Servos 8,4V 

High-Voltage Brushless Servo 

(HBS) 

HBS (high-voltage brushless servo) 

combines the performance of brushless 

technology with all the advantages 

of the high-voltage servo. In addition to 

the unparalleled acceleration, greater 

efficiency, and no wear of carbon brushes, 

these servos can be supplied 

with an operating voltage of 8.4V. Direct 

connection of 2-cell LiPo battery 

packs is now possible with no problem; 

in addition, these servos also provide 

top performance at an operating voltage 

of just 6V. Precision manufacturing 

and assembly and top component quality 

provide the servo drive system with 

uncompromising power and speed. A 

new dimension in the combination of 

power, speed, acceleration, precision, 

and resolution. 

Servo HBS 660 BB, MG 


Suitable for power models and gliders, 

helicopters, boat models, and RC cars. 

● High-voltage, operating voltage up to 

8.4V! 

● Direct operation with 2-cell LiPo battery 

packs 

● Operating voltage range 4.8 ... 8.4 V 

● Brushless 

● 2 x ball bearings 

● Metal drive mechanism 

Servo HBS 690 BB 





8.4V! 


packs 


● Brushless 


● Carbonite drive mechanism 

7981 

7980 

Servo HBS 760 BB 





8.4V! 


packs 


● Brushless 


● Carbonite drive mechanism 

Operating voltage up 

to 8.4V! 

Top efficiency! 

7985 




helicopters, boat models, and RC cars 


8.4V! 


packs 


● Brushless 



7986 

Servo HBS 790 BB, MG low profile 




Extremely fast and powerful „Low Profile“ 

competition brushless servo for 

1:10 electric touring cars. 


8.4V! 


packs 


● Brushless 

● Low Profile 


● Metal drive 

mechanism 






8.4V! 


packs 


● Brushless 








8.4V! 


packs 


● Brushless 



Type Servo HBS 660 BB, Servo HBS 690 BB Servo HBS 760 BB Servo HBS 770 BB, Servo HBS 790 BB, Servo HBS 860 BB, Servo HBS 870 BB, 

MG 

MG 

MG low profile MG 

MG 

Order No. 7980 7981 7985 7986 7987 7990 7991 

Dimensions (LxWxH) mm 35 x 16 x 34,5 35 x 16 x 34,5 40 x 19,5 x 39,5 40 x 19,5 x 40 40 x 19,5 x 25,5 40 x 20 x 40 40 x 20 x 40 

Operating voltage V 4,8 ... 8,4 4,8 ... 8,4 4,8 ... 8,4 4,8 ... 8,4 4,8 ... 8,4 4,8 ... 8,4 4,8 ... 8,4 

Angular travel incl. trim, approx. ° 2 x 45 2 x 45 2 x 45 2 x 45 2 x 45 2 x 45 2 x 45 

Replacement gearbox 

Gear unit 

7980.2 7981.2 7985.2 7986.2 7987.2 7990.2 7991.2 

All-up weight, approx. g 36 32 52 59 43 68 68 

Holding torque 6.0V, approx. N/cm 144 68 100 46 135 255 220 

Holding torque 7.4V, approx. N/cm 174 76 110 55 150 289 260 

Bearings 

No-load current drain, approx. mA 37 37 36 35 31 46 47 

Torque at 6.0V, approx. N/cm 72 51 92 46 61 132 110 

Torque at 7.4V, approx. N/cm 87 60 105 55 70 150 130 

Transit speed at 6.0 V, approx. 

Sek/40° 

0,1 0,06 0,07 0,04 0,055 0,11 0,09 

Transit speed at 7.4V, approx. Sek/40° 0,08 0,05 0,055 0,03 0,045 0,09 0,07 

Charging rate at 6.0V approx. mA 1460 1450 2250 2270 2020 2350 2390 

Charging rate of 7.4V approx. mA 1780 1710 2740 2760 2310 2860 2850 

124 125 

Specification 

7987 

7990 

7991 



High-Voltage-Servo 8,4 V, accessories 

High-Voltage Servo (HVS) 

High-voltage, 2-cell LiPo batteries as 

direct voltage supply. That is the new 

product range from the digital servo 

segment, HVS (high-voltage servo). 

With a maximum permissible operating 

voltage of 8.4V, the new battery technology 

can be used without any reservations. 

Naturally, these servos can 

also be operated with 6.0V. Top production 

quality is also a hallmark of this 

line servos. 

Especially well suited for motor powered 

and glider aircraft models, helicopters, 

boat models, and RC cars.Highvoltage, 

operating voltage up to 8.4V! 

● Direct operation with 2-cell LiPo batteries 

● Operating voltage range 

4.8 ... 8.4 V 

● Ball bearings 


Operating voltage of 

8,4V! 

Servo HVS 930 BB, MG 




Specification 

Type Servo HVS 930 BB, MG Servo HVS 933 BB, MG Servo HVS 939 BB, MG 

Order No. 7965 7970 7975 

Dimensions (LxWxH) mm 30 x 13 x 33 32 x 16 x 33,5 40 x 19,5 x 42 

Operating voltage V 4,8 ... 8,4 4,8 ... 8,4 4,8 ... 8,4 

Angular travel incl. trim, approx. ° 2 x 45 2 x 45 2 x 45 


Gear unit 

7965.2 7970.2 7975.2 



Order No. 7907.1 

Precisely manufactured of high-quality carbon fiber reinforced plastic, this arm effortlessly 

implements the adjusting power of your servo. 

For use with the large Graupner drive mechanism types of the DES servo series starting 

with DES 567 MG #7923 

For use with the large Graupner drive mechanism types of the HVS servo series starting 

with HVS 930 BB, MG #7965 

For use with the large Graupner drive mechanism types of the HBS servo series starting 

with HBS 660 BB, MG #7980 

● Package contains 4 servo arms 

DES CFK heavy-duty servo arm, 4 

pcs. 36mm 



pcs. 67.5 mm 



pcs. 51mm 


DES CFK heavy-duty dual servo 

arm, 4 pcs. 120 mm 


The RDS (Rotary Drive System) linkage is a new method, already in widespread 

use in the competitive world, to link ailerons and cambered flaps of aircraft models. 

The special feature is that everything is installed completely within the surface and 

nothing sticks out beyond the surface, which of course provides optical and natural 

aerodynamic advantages. The rudder and flap linkage is nearly free of play, which 

is also a benefit of this system. This set includes all the components needed to 

quickly and simply upgrade your model with a complete RDS linkage. The sophisticated 

technical solution makes it easy to adapt this linkage to your model and, furthermore, 

to uninstall it from the servo again. 

RDS servo link GRAUPNER DES SMALL 


● Suitable for the small Graupner DES drives starting with Servo DES 428 BB, MG 

#7911 

● Aluminium adapter for servo drives, 8 x 20 mm 

● Aluminium retainer for steel link, adjustable length, 4 x 70 mm 

● Brass socket holds aluminium retainer 5 x 8 mm 

● Hardened steel link, adjustable length, 2 x 30 x 30 mm 50° 

● Carbon fibre pouch for steel link, adjustable form, 30 x 12 x 4 mm 

All-up weight, approx. g 23 29 58 

RDS servo link GRAUPNER DES POWER 


Holding torque 6.0V, approx. N/cm 108 128 230 



Holding torque 7.4V, approx. N/cm 126 150 264 

● For use with the large Graupner drive mechanism types of the DES servo series 

RDS servo link Graupner DES 3927 1 

Bearings 

starting with DES 567 MG #7923 

RDS servo link GRAUPNER DES POWER 3928 1 ● For use with the large Graupner drive mechanism types of the HVS servo series 

DES Heavy-duty alu-servo arm 7908.1 1 

No-load current drain, approx. mA 17 17 19 

starting with HVS 930 BB, MG #7965 

Torque at 6.0V, approx. N/cm 54 64 115 

DES heavy duty alu dual servo arm 7908.2 1 ● For use with the large Graupner drive mechanism types of the HBS servo series 

Torque at 7.4V, approx. N/cm 63 75 132 

DES CFK heavy-duty servo arm, 4 pcs. 36mm 7907.1 1 

starting with HBS 660 BB, MG #7980 

Transit speed at 6.0 V, approx. Sek/40° 0,11 0,11 0,12 

DES CFK heavy-duty servo arm, 4 pcs. 51mm 7907.2 1 ● Aluminium adapter for servo drives, 16 x 35mm 

Transit speed at 7.4V, approx. Sek/40° 0,09 0,09 0,10 

DES CFK heavy-duty servo arm, 4 pcs. 67.5 mm 7907.3 1 ● Aluminium retainer for steel link, adjustable length, 10 x 100 mm 

Charging rate at 6.0V approx. mA 920 990 1850 

DES CFK heavy-duty dual servo arm, 4 pcs. 120 mm 7907.4 1 ● Brass socket holds aluminium retainer 11 x 15 mm 

Charging rate of 7.4V approx. mA 1160 1280 2200 

Pull relief RC plug 3506 1 ● Hardened steel link, adjustable length, 6 x 50 x 50 mm 50° 

● Carbon fibre pouch for steel link, adjustable form, 40 x 15 x 9 mm 

Dimensions rounded to .5 

126 

127 



DES serrvos and accessories 

Servo DES 718 BB, MG 180 Grad 


Especially well suited for motorized and 

glider models, as well as boot models, 

in applications for which an extremely 

high setting path is needed. 

● 180° travel even at +/-100% channel 

control 

● 2 x ballraces 


7947 

Servo DES 448 BB, MG lose MA12 

Order No. 7914.LOSE 

DES Servo 

Because of its extremely slim design 

and top precision of adjustment, this digital 

servo is the ideal planar servo for 

your model. 

The precision-made twin-ballraced metal 

gearboxes guarantee superbly accurate 

positional performance along 

with great power and speed. 

Additional, universally usable attachment 

straps offer convenience 

and flexibility for servo installation, 

even lying flat. 

The perfect solution for installation in 

tight places. 

Especially well suited for motorized and 

glider models. 



7914.LOSE 



Suitable for RC power models and gliders 

and micro-helicopters 

● Ballraces 


7919.LOSE 



Especially well suited for motor powered 

and glider aircraft models, microhelicopters, 

and RC boat models. 

● Ballraces 


7932.LOSE 



Servo-Voltage-Controller 5,9V 4197 1 

Duo-Servo-Voltage-Controller 5,9V 4198 1 

RDS servo link GRAUPNER DES SMALL 3924 1 

RDS servo link Graupner DES 448 BB,MG 3926 1 

RDS servo link Graupner DES 3927 1 

RDS servo link GRAUPNER DES POWER 3928 1 

DES Heavy-duty alu-servo arm 7908.1 1 

DES heavy duty alu dual servo arm 7908.2 1 



DES CFK heavy-duty servo arm, 4 pcs. 67.5 mm 7907.3 1 

DES CFK heavy-duty dual servo arm, 4 pcs. 120 mm 7907.4 1 

Pull relief RC plug 3506 1 



Suitable for RC power models and gliders, 

boat models, and RC off-road 

cars, scale 1:8 and 1:5 





Suitable for RC power models and gliders, 

boat models, and RC cars 






hilicopters, boat models, and RC cars 



Specification 

Type Servo DES 718 BB, Servo DES 448 BB, Servo DES 488 BB, Servo DES 587 BB, Servo DES 707 BB, Servo DES 708 BB, Servo DES 806 BB, 

MGLevel 180 MG bulk (12 pcs.) MG bulk (12 pcs.) MG bulk (12 pcs.) MG bulk (12 pcs.) MG bulk (12 pcs.) MG bulk (12 pcs.) 

Order No. 7947 7914.LOSE 7919.LOSE 7932.LOSE 7945.LOSE 7946.LOSE 7952.LOSE 

Dimensions (LxWxH) mm 40 x 19,5 x 39 31,5 x 9,5 x 33 23,5 x 11,5 x 27 29,5 x 13 x 31 40 x 19,5 x 39 40 x 19,5 x 39 40 x 19,5 x 40 

Operating voltage V 4,8 ... 6,0 4,8 ... 6,0 4,8 ... 6,0 4,8 ... 6,0 4,8 ... 6,0 4,8 ... 6,0 4,8 ... 6,0 

Angular travel incl. trim, approx. ° 2 x 92 2 x 45 2 x 45 2 x 45 2 x 45 2 x 45 2 x 45 


Gear unit 

7946.2 7914.2 7919.2 7932.2 7945.2 7946.2 7952.2 

All-up weight, approx. g 54 19 11,5 20 54 54 53 

Holding torque 4.8V, approx. N/cm 186 69 52 111 271 186 170 

Holding torque 6.0V, approx. N/cm 215 82 58 129 303 215 199 

Bearings 

No-load current drain, approx. mA 8 7 7 7 8 8 8 



Transit speed at 4.8V, approx. Sek/40° 0,11 0,12 0,09 0,13 0,17 0,11 0,1 

Transit speed at 6.0 V, approx. 

Sek/40° 

0,09 0,1 0,08 0,11 0,14 0,09 0,08 



128 Dimensions rounded up to .5 

129 

7945.LOSE 

7946.LOSE 

7952.LOSE 


Chargers 

Chargers, Switching Power Supply 

Controllable switch-mode power 

supply 12-26 V / > 30 A > 800 W 


● Low-cost 

● Low weight 

● Small dimensions 

● Variable output voltage 12 - 26 V DC 

● Variable current limiting 0 - approx. 

30 A 

● Illuminated display for voltage and 

current 

Specification 

● Particularly well suited for supplying 

chargers, e.g. UDP80 and DC 

● Mini-drills 

● Suitable for fast charging of 12 V 

lead-acid batteries using constant 

current / constant voltage charge 

method, and much more. (Please 

consult the operating instructions!) 

Type Controllable switch-mode power Mini charger 10 0.6A for 7-10 NiMH 

supply 12-26 V / > 30 A > 800 W cells 

Order No. 6492 6413 

Dimensions (LxWxH) mm 260 x 190 x 105 82 x 52 x 34 

Disconnection NiMH/NiCd Delta Peak 

Output V; A DC 12 ... 26; >30 

Input voltage V 50Hz AC 220 ... 240 AC 110 ... 240 

All-up weight, approx. g 2700 95 

Charge facility 7 ... 10 NiCd/NiMH-Zellen 0,5 ... 5 Ah 

Charge current, mA mA 600 

Continous output current A >30 

Plug connector Geeignet für G4 JST 

Charger cable 

Minilader 10 0,6A für 7-10NiMH-Zellen 


Affordable compact charger for NiCd/NiMH drive batteries with 7 - 10 cells. 

● LED charge monitoring display 

● Light and efficient, thanks to the integrated switch-mode power supply 

● Integrated charging cables 

● Delta-peak charging shutdown with subsequent trickle charge 

Connector, 4mm with protective cover red/black 


Connector, 4mm with protective cover red/black 

Order No. 3002.5 

● Package contains: 5 pair 

● 4-mm connector 

● Stackable 

● With spring-loaded protective cover to prevent accidental touching of the contacts 

● User installed 

● Suitable for cables up to 2.5 sq.mm. and for GM silicone cables up to 4 sq.mm 

Charging cable G3.52.5 qmm and protective connector, 4 mm 

Order No. 2970.LS 

● With spring-loaded protective cover to prevent accidental touching 

of the contacts 

Charger cable with 4-mm protective connectors, 0.5 m long, 

2.5 sq.mm. 

Order No. 3041.S 



Charger cable with 4-mm protective connectors, 1 m long, 4 

sq.mm. 

Order No. 3041.SL 



130 131 

Charging technology


ULTRA TRIO PLUS 16 



● Low-cost computer-controlled 

universal fast charger 

● With 12 V DC input and integrated 

lightweight switch-mode mains PSU 

for 100 ... 240 V. That makes the 

charger the ideal choice for use „on 

the road“, and even abroad (USA / 

Japan). 

● Three outputs for simultaneous 

charging of drive, transmitter, and 

receiver batteries 

● Output 1: Graupner balancer socket 

for 1 ... 8 NiCd / NiMH / LiPo / LiIo / 

LiFe batteries 

● Outputs 2, 3: Graupner balancer 

socket for 2 ... 3 LiPo / LiIo / LiFe 

batteries 

● Clearly arranged program structure 

and four buttons for ultra-simple 

operation 

● Large high-contrast two-line LCD 

screen with blue backlighting for 

simultaneous display of all relevant 


● Automatic charge, discharge, 

capacity measurement, battery care, 

and conditioning program for NiMH 

and NiCd batteries as used in model 

building 

● Delta-Peak Cut-Off detector for 

NiMH and NiCd cells with variable 

Delta-Peak voltage, ensuring full 

charges to 100% capacity 

● Single-cell charging, ideal for 

glowplug batteries 

132 

● Constant current / constant voltage 

charge method for LiPo, LiIo, LiFe 

cells. Declining current curve after 

final charge voltage, with automatic 

charge cut-off 

● Storage program for LiPo, LiIo, and 

LiFe batteries 

● Lead-acid battery charge programs 

with optimised charge curve 

● Short-circuit, overload and reversed 

polarity protection 

● Plug-in 12 V DC input with 4-mm 

banana sockets 

● Adjustable buzzer, ON / OFF or 

3 ... 10 sec 

● Adjustable safety timer, ON / OFF 

or 10 ... 600 min 

● Three languages available: English / 

German / French 

● Display of internal battery resistance 

● Display of Single cell voltages for 

2 ... 8 cells in NiCd / NiMH / Li 

modes 

● Serial port for display of charge / 

discharge curves, and for firmware 

upgrades 

● Ready to connect 

With 3 lithium-ready 

charging outputs 

150 W charging 

capacity at 12 V DC 

120 W charging 

capacity at 230 V AC 

Specification 

Dimensions (LxWxH) 200 x 175 x 76 mm 

Disconnection NiMH/NiCd Delta Peak einstellbar 

Balancer socket 1 1 ... 8 NiMH/NiCd/LiPo/LiIo/LiFe 

Balancer socket 2 2 ... 3 LiPo/LiIo/LiFe 

Balancer socket 3 2 ... 3 LiPo/LiIo/LiFe 

Balancing current 1 max. NiMH/NiCd: 100 mA, LiPo/LiIo/LiFe: 300 mA 

Balancing current 2 max. 42 mA 

Balancing current 3 max. 42 mA 

Operating voltage Netzspannung AC: 220 ... 240 V (120 W) oder DC 

(min. 150W ): 11 ... 15 V 

Discharge current, output 1 (max. 40W) 0,1 ... 5 A, W 

Charge facility 1 ... 14 NiMH-/NiCd-, 1 ... 8 LiPo-/LiIo-/LiMn-/ 

LiFe-, 1/2/3/6 Pb-Zellen 

Charge facility per output 1 1 ... 14 NiMH-/NiCd-, 1 ... 8 LiPo-/LiIo-/LiMn-/ 

LiFe-, 1/2/3/6 Pb-Zellen 

Charge facility per output 2 1 ... 8 NiMH-/NiCd-Zellen, 1 ... 3 LiPo-/LiIo-/LiFe- 

Zellen 

Charge facility per output 3 1 ... 8 NiMH-/NiCd-Zellen, 1 ... 3 LiPo-/LiIo-/LiFe- 

Zellen 

Charge current, output 1 Netzteilbetrieb (max. 120 W), 

12 ... 15 V DC-Betrieb (max. 150 W) 0,1 ... 10 A 

Charge current, output 2 0,1 - 1 A 

Charge current, output 3 0,1 - 1 A 

Balancer adapter and USB cable included 



3065.7SET Balancer adapter set, PQ / TP / XH / EH - Graupner 

6444.USB Interfact cable MINIUSB/PC-USB 



LiPo safety case, 400 x 300 x 140 8371 1 

LiPo Safe security bag 22 x 30 cm 8372 1 

LiPo-SAFE security bag 18 x 22 cm 8373 1 

Heating foil, small, 12 V / 2 x 20 W, self-adhesive 8375 1 

USB Interface cableGM-Genius controller 7168.6 1 

USB memory stick, 1GB 8444 1 

Adaptor cable 3S for 3065.PQ/TP/XH for 2-3 cells 6466.3 1 

Balancer extension cable for 2 cells 3065.2 1 





Extension cable for balancer, 7 cells 3065.7 1 

Balancer extension adapter Graupner EH 2-7 cells 3065.7EH 1 

Polyquest / Graupner balancer adapter 3065.7PQ 1 

Balancer adapter set, PQ / TP / XH / EH - Graupner 3065.7SET 1 

Thunderpower / Graupner balancer adapter 3065.7TP 1 

Balancer adapter, JST-XH / Graupner 3065.7XH 1 

Balancer adapter, EH, TP / Graupner 2x 2-3 cells 3065.EHTP 1 

Balancer adapter XH, TP / Graupner, 2 x 2 - 3 cells 3065.XHTP 1 

Charging cable G3.5, 2.5 qmm 2970.L 1 

Charge leads for batteries with G2 plug 3011 1 

Charge lead for batteries with BEC plug 3037 1 

Charging cable for MG 6 3049 1 

Lead battery charging leads 3055 1 

Charge lead, glowplug battery 3060 1 

Charge lead for Graupner/JR transmitter 3022 1 


Charge lead for R/C Graupner/JR receiver battery 3021 1 

Charge lead for R/C Futaba receiver battery 3021.65 1 

Charge lead for batteries with standard Japan plug 3371 1 

Charge lead with crocodile clips 3040 1 

G4 charge lead / laboratory lead 3041 1 

Charger cable G4 with 2S-EHR balancer cable for 

Li-batteries in protective case 

3041.2S 1 

Charger lead G4 with balancer connector 2S-EHR 0.5m 

for saddle-pack Li batteries 

98994.LG4 1 

Charging lead G4 with balancer socket 2S-EHR for 

saddle pack batteries with G3.5/G4 

98996.L 1 

Charging lead and balancer socket 2S-EHR for Li batteries 

with G3.5/G4 

98997.L 1 

Battery holder for up to 7 Sub-C cells 6444.6 1 

Conversion Plug UK3P to SCHUKO 13A Fusescrewable, 3075.GB3S 1 

BSI appr. 

Plug for low power device for charger 6414, GB version 3076 1 

Cable for low power device, CH version 3076.CH 1 

Plug for low power device for charger 6414, US version 3077 1 

133 

Charging technology


ULTRA DUO PLUS 45 



● Computer-controlled universal fastcharger 

● Stacks together easily with the external 

mains PSU, Order No. 6460, forming 

a compact unit 

● Two independent charge outputs 

● Graupner balancer socket for 

balancing and displaying individual 

cell voltages for 1 ... 14 NiCd 

/ NiMH / LiPo / LiIo / LiFe cells at 

Output 1, and for 1 ... 4 cells at 

Output 2 

● Display of internal resistance of individual 

cells, for checking cell quality 

with pack connected to balancer socket 

at Output 1 

● 45 battery memories for storing all 

important battery parameters, with 

copy function 

● Battery memories and data can be 

programmed and backed-up using a 

PC 

● Discharge voltage curves can be 

read out subsequently using a PC 

● Mains PSU function, max. 120 W: 

user-variable voltage 0 ... 24 V, and 

variable current limiting 

● Automatic charge, discharge, capacity 

measuring, battery maintenance 

and conditioning program 

for NiMH, NiCd, LiPo, LiIo, LiFe 

batteries as used in modelling 

● Ultra-simple operation with 

clearly arranged program 

structure controlled by three 

buttons and rotary knob 

button 

● High-contrast graphic 

LCD screen (128 x 64 

dots / 21 x 8 characters) 

with blue backlighting, 

for displaying 

all relevant 

parameters or 

charge / discharge 

curves 

● Charge / discharge facility for NiMH, 

NiCd, LiPo, LiIo, LiMn, LiFe and leadacid 

batteries 



Delta-Peak voltage, ensuring reliable 

charging to 100% capacity 

● Capable of charging single cells, 

therefore ideal for glowplug energizers 

and cell selection processes 

● Charges LiPo, LiIo, LiFe, lead-acid 

cells with constant current / constant 

voltage method. Declining current 

curve after the final charge voltage is 

reached, with automatic charge termination 

● Charge processes: NiCd / NiMH: 

automatic, normal, linear, GMVIS, 

IMPULSE, REFLEX, REPEAK, stepped 

charge LiPo / LiIo / LiFe: automatic, 

CC / CV, FAST-CHG, STORE 

● Special charge facility for storing batteries 


with optimised charge curve, discharge 

facility, variable discharge 

current for determining battery capa- 

the Multi-Talent 

city and residual capacity 

● Program for tyre heating covers, Order 

No. 94711, with temperature regulation, 

or for battery heater, Order 

No. 8375, in LiPo safety case, Order 

No. 8370 or Order No. 8371 

● Motor run-in and test functions for 

brushed electric motors 

● Short-circuit, overload and reverse 

polarity protection 

● Switchable buzzer, selectable melody 

● Variable safety timer 

● Variable maximum charge capacity 

● Selectable screen language: English 

/ German / French / Italian 

● Display of internal battery resistance 

● PC-USB interface for displaying battery 

curves 


Li storage program, Li quick 

charge program 

Up to 20 A charging 

current 

Bis 10A (80W) 

Entladung 

Display: Mains PSU function 

Display: Normal discharge 

Specification 


Balancer socket 1 2 x 1...7 = 1...14 NiMH/NiCd/LiPo/LiIo/LiFe-Zellen 

Balancer socket 2 1...4 = 1...4 NiMH/NiCd/LiPo/LiIo/LiFe-Zellen 

Balancing current 1 max. ca. NiMH/NiCd: 100 mA, LiPo/LiIo/LiFe: 300 mA 

Operating voltage 25 A DC max. 250 W gesamt / 11...15 V 

Discharge current, output 1 ca. 0,1...10, max. 80 A, W 


Charge facility per output 1...30 NiMH-/NiCd-Zellen, 1...14 LiPo-/LiIo-/ 

LiMn-/LFe-Zellen, 1...6, 12 Pb-Zellen 

Charge facility per output 1 1... 10 NiMH-/NiCd-Zellen, 1...4 LiPo-/LiIo-/LiMn-/ 

LiFe-Zellen 

Charge current, output 1 (max. 250 W) 1 x 0,1 ... 20 A 

Charge current, output 2 (max. 50 W) 1 x 0,1... 5 A 



6444.1 Temperature sensor for C-batteries withmagnet 

6444.2 Temperature sensor without magnet 


6460.4 Double-sided plug G4for 6460 and 6443, 2pcs. 

Display: Main menu, heating + mains PSU 

Display: Normal discharge (LiPo) 

6444.1 Included in the set 


6444.USB Included in the set 

3065.14 Accessories 



LiPo safety case, 400 x 300 x 140 8371 1 

LiPo Safe security bag 22 x 30 cm 8372 1 

Heating foil, small, 12 V / 2 x 20 W, self-adhesive 8375 1 

ULTRA DUO PLUS 40 adapter lead: 3065.14 1 

Interfact cable MINIUSB/PC-USB 6444.USB 1 

Temperature sensor without magnet 6444.2 1 

Temperature sensor for C-batteries withmagnet 6444.1 1 

Balancer extension/adapter Graupner EH 2-7 cells 3065.7EH 1 

Polyquest / Graupner balancer adapter 3065.7PQ 1 


Thunderpower / Graupner balancer adapter 3065.7TP 1 

Balancer adapter, JST-XH / Graupner 3065.7XH 1 

Balancer adapter, EH, TP / Graupner 2x 2-3 cells 3065.EHTP 1 

Balancer adapter XH, TP / Graupner, 2 x 2 - 3 cells 3065.XHTP 1 


Cooling fan set 6444.L 1 

134 135 

Charging technology


ULTRA DUO PLUS 60 


Up to 20 A 

charging current 


● Computer-controlled universal fast 

charger 

● With integrated lightweight switchmode 

mains PSU for 100 ... 240 V 

and 12 DC inputs 

● This means that the charger is the 

perfect choice for all mobile applications, 

and also for use abroad (USA / 

Japan) 

● Two equal-value independent or dependent 

(CV-link mode) charge outputs 

● Additional 12V DC output max. 5A, 

e.g. for fans, Peltier coolers 

● Graupner Balancer socket for 2 x 1 

... 7 NiCd / NiMH / LiPo / LiIo / LiFe 

cells 

● 60 memories for storing all essential 

battery parameters 

● Automatic charge, discharge, capacity 

measurement, battery maintenance, 

and conditioning programs 

for all NiMH, NiCd, LiPo, LiIo, LiFe 

batteries used in modeling 

● Ultra-simple to operate, with clearly 

arranged program structure, six 

keys, and rotary knob 

● Two high-contrast LCD screens (128 

x 64) with blue backlighting: 21 x 8 

characters for displaying all relevant 

parameters or charge / discharge 

curves 

● Charge / discharge capability for 

NiMH, NiCd, LiPo, LiIo, LiMn, LiFe or 

Pb (lead-acid) batteries 

● Delta-Peak cut-off detector for NiMH 

and NiCd cells with variable Deltapeak 

voltage, ensuring 100% full battery 

charging 

● Capable of charging single cells, 

therefore ideal for glow energizer 

batteries and for cell selection processes 

● Charges LiPo, LiIo, LiFe and leadacid 

cells using constant current / 

constant voltage method 

● Declining current curve after final 

charge voltage, with automatic 

charge termination. 

● Charge processes: NiCd / NiMH: automatic, 

normal, linear, GMVIS, IM- 

PULSE, REFLEX, REPEAK, staged 

charging 

● LiPo / LiIo / LiFe: automatic, CC/CV 

● Quick charge program, CV-link, storage 

program 

● Balancer program 

● Special discharge balancer program 

for NiCd/NiMH batteries 

● Data memory for comparing all important 

battery data 


with optimised charge curve, discharge 

facility, variable discharge 

current for determining battery capacity 

and residual capacity 

● Program for tyre heating covers Order 

No. 94711 with temperature control 



● Power supply unit function: variable 

voltage and current limiting 

● Protected against short-circuit, overload 

and reversed polarity 

Li storage program, Li quick 

charge program 

● Switchable buzzer, selectable melody 


● Variable max. charge capacity 

● Selectable language: English / German 

/ French / Italian 

● Internal battery resistance display 

● Single cell voltage display for 2 x 2 - 

7 cells in NiCd / NiMH / Li modes 

● PC-USB interface for displaying battery 

curves on the PCscreen 


Specification 


Disconnection NiMH/NiCd Delta Peak adjustable 

Output voltage Output 3 (max. 5 A): 12 V 

Balancer socket 2x 1 ... 7 NiMH/NiCd/LiPo/LiIo/LiFe-cells 

Max. balancing current NiMH/NiCd: 300 mA, LiPo/LiIo/LiFe: 1000 mA 

Operating voltage 11 ... 15 V/40 A DC or mains operation AC 100 ... 240 V 

Discharge current (2 x max. 80 W) 0,1 ... 10 A 


Charge output 2 

Charge facility 1 ... 18 NiMH-/NiCd-cells, 1 ... 7 LiPo-/Lilo-/LiMn-/LiFe-cells, 

1 ... 6, 12 Pb-cells 

Charge current, A In power unit operation overall including output 3 a maximum of 120W, 

in 11 ... 15 V DC operation overall a maximum of 360 W (max. 2 x 180 W or 

1 x 250 W output 1 or 2 + 60 W output 3) 2 x 0,1 A ... 20 A A 

Max. discharge current 0,1 - 10 A 



6444.USB Included in the set 

With built-in balancer 

for NiMH/NiCd/LiPo/LiIo/LiFe cells 



USB memory stick, 1GB 8444 1 



Cooling fan set 6444.L 1 



6444.1 Temperature sensor for C-batteries withmagnet 

6444.2 Temperature sensor without magnet 


Battery curves (charging) 

Balancer main menu 

136 137 

Example of use 

Data comparison 

Configuration main menu 

Charging technology


ULTRA DUO PLUS 80 - New Version 


With built-in balancer 

for NiMH/NiCd/LiPo/LiIo/ 

LiFe cells 


● Computer-controlled universal fast 

charger 

● 12 DC input 

● Two equal-value independent or 

dependent (CV-link mode) charge 

outputs 

● Graupner balancer socket for 2 x 1 

... 8 NiCd / NiMH / LiPo / LiIo / LiFe 

batteries 

● 60 battery memories for storing all 

essential battery parameters 

● Automatic charge, discharge, 

capacity measurement, battery care, 

and conditioning program for NiMH-, 

NiCd-, LiPo-, LiIo-, LiFe batteries as 

used in model building 

● Ultra-simple to operate, with clearly 

● Data memory for comparison of all 

important battery data 


with optimised charge curve, 

discharge facility, variable discharge 

current for determining battery 

capacity and residual capacity 

● Program for tyre heating covers 

order no. 94711 with temperature 

control 



● Power supply unit function: variable 

voltage and current limiting 

● Protected against short-circuit, 

overload, and reversed polarity 

● Switchable buzzer, selectable 

melody 

● Single cell voltage display for 2 x 2 - 

8 cells in NiCd / NiMH / Li modes 

● PC-USB interface for 

displaying battery curves on the PC 

screen 


Temperature sensors 

Specification 

Dimensions (LxWxH) 

Disconnection NiMH/NiCd 

Balancer socket 

Max. balancing current 

Operating voltage 

Operating voltage 

Discharge current 

Charge output 

Charge facility 

Charge current, A 

Max. discharge current 



180 x 155 x 85 mm 

Delta Peak adjustable 

2 x 1 ... 8 NiMH/NiCd/LiPo/Lilo/LiFe-cells 

NiMH/NiCd: 300 mA; LiPo/Lilo/LiFe: 1000 mA 

11 ... 28 V/40 A DC V 

DC: 11 (max. 360W) ... 28 (max. 1000W) V V 

(2 x max. 40 W) 0,1 ... 10 A 

2 

1 ... 18 NiMH-/NiCd-cells, 1 ... 8 LiPo-/Lilo-/ 

LiMn-/LiFe-cells, 1 ... 6, 12 Pb-cells 

2 x 0,1 A ... 20 A A 

0,1 - 10 A 


Type 

Switching power supply 12V/25A 300W 

Controllable switch-mode power supply 12-26 V / > 30 A > 

800 W 

LiPo safety case, 400 x 300 x 140 

LiPo Safe security bag 22 x 30 cm 

LiPo-SAFE security bag 18 x 22 cm 

Heating foil, small, 12 V / 2 x 20 W, self-adhesive 

USB memory stick, 1GB 

Extension cable for balancer, 7 cells 

Balancer extension/adapter Graupner EH 2-7 cells 

Polyquest / Graupner balancer adapter 

Balancer adapter set, PQ / TP / XH / EH - Graupner 

Thunderpower / Graupner balancer adapter 

Balancer adapter, JST-XH / Graupner 

Battery holder for up to 7 Sub-C cells 

Order No. 

6460 

6492 

8371 

8372 

8373 

8375 

8444 

3065.7 

3065.7EH 

3065.7PQ 

3065.7SET 

3065.7TP 

3065.7XH 

6444.6 

No. off 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

arranged program structure, six 

keys, and rotary knob 

● Two high-contrast LCD screens (128 

x 64) with blue backlighting: 21 x 8 

characters for displaying all relevant 

parameters or charge / discharge 

curves 

● Charge / discharge capability for 

NiMH-, NiCd-, LiPo-, LiIo-, LiMn-, 

LiFe or Pb (lead-acid) batteries 



Delta-Peak voltage, ensuring full 

charges to 100% capacity 

● Single-cell charging, ideal for 

glowplug batteries or for cell 


● Variable max. charge capacity 

● Selectable language: English / 

German / French / Italian 

● Internal battery resistance 

display 

Settings: Languages available: German / English / 

French / Italian 

6444.1 

6444.2 

6444.USB 

Temperature sensor for C-batteries withmagnet 

Temperature sensor without magnet 

Interfact cable MINI USB/PC-USB 

Cooling fan set 

Balancer extension cable for 2 cells 





Balancer adapter, EH, TP / Graupner 2x 2-3 cells 

Balancer adapter XH, TP / Graupner, 2 x 2 - 3 cells 

Charging cable G3.5, 2.5 qmm 

Charge leads for batteries with G2 plug 

Charge lead for batteries with BEC plug 

Charging cable for MG 6 

Lead battery charging leads 

Charge lead, glowplug battery 

Charge lead for Graupner/JR transmitter 

6444.L 

3065.2 

3065.3 

3065.4 

3065.5 

3065.6 

3065.EHTP 

3065.XHTP 

2970.L 


3037 

3049 

3055 

3060 

3022 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

selection 


● Constant current / constant voltage 

Charge lead for R/C Graupner/JR receiverbattery 3021 1 

charge method for charging LiPo, 

Charge lead for R/C Futaba receiver battery 3021.65 1 

LiIo, LiFe, Pb cells 

● Declining current curve after final 

charge voltage, with automatic 

charge cut-off 

● Charge processes: NiCd / NiMH: 

automatic, normal, linear, GMVIS, 

IMPULSE, REFLEX, REPEAK, staged 

charging LiPo/LiIo/LiFe: automatic, 

CC/CV, quick charge, storage 

programme, CV-link 

● Special charge/discharge capability 

for storage of batteries 

● Balancer program 

● Special discharge balancer program 

for NiCd/NiMH batteries 

138 

Up to 1000 W 

charging capacity 

Example of use with two #6460 power supply units. For full charging capacity, 4 #6460 

power supply units are needed. Two each parallel and in series. 

Charge lead for batteries with standard Japan plug 

Charge lead with crocodile clips 

G4 charge lead / laboratory lead 

Charger cable G4 with 2S-EHR balancer cable for 

Li-batteries in protective case 

Charger lead G4 with balancer connector 2S-EHR 0.5m 

for saddle-pack Li batteries 

Charging lead G4 with balancer socket 2S-EHR for saddle 

pack batteries with G3.5/G4 

Charging lead and balancer socket 2S-EHR for Li batteries 

with G3.5/G4 

Conversion Plug UK3P to SCHUKO 13A Fusescrewable, 

BSI appr. 

Plug for low power device for charger 6414, GB version 

Cable for low power device, CH version 

Plug for low power device for charger 6414, US version 

3371 

3040 

3041 

3041.2S 

98994.LG4 

98996.L 

98997.L 

3075.GB3S 

3076 

3076.CH 

3077 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 

1 139 

Ladetechnik

LiPo batteries 

Transmitter and receiver batteries 

NiMH RTU 1N-3000 1,2V SUB-C 

single cell 


NiMH battery, ready to use 

● Very low spontaneous discharge; 

after 12 months, still approx. 75% of 

nominal capacity 

● Low cost, particularly in comparison 

to LiPo batteries 

● Quick-charge capability 


To replace five-cell NiMH packs or with 

PRX-5A. On/off switch with controlled 

output voltage: 5.1V, 5.5 V, or 5.9 V, order 

no. 4136. 

Dimensions approx. 86 x 28 x 31 mm. 

Weight approx. 143 g. 

LiFe 3/1500 9.9 V TX transmitter 

battery 


Flat, with PCM circuit to guard against 

deep discharge and overcharging, suitable 

for the following Graupner transmitters: 

R-1 (40 MHz), or iFS module, or 

Spektrum module, for direct replacement 

of eight-cell NiMH packs. 

Dimensions approx. 115 x 49 x 16 mm. 






no. 4136. 




To replace five-cell NiMH packs. 

Receiver batteries or with voltage controller, 

order no. 4197. 







no. 4136. 




The LiPo series from Graupner has an 

extremely high load capability. As a result 

the packs remain much cooler in 

normal use (20-30C), and last for many 

more charge / discharge cycles than 

batteries with lower max. load capacity. 

These high reserves of performance 

give the batteries plenty of power even 

after a large number of flight cycles, 

which means that they remain suitable 

for their primary purpose longer than 

other batteries. The low internal resistance 

coupled with the associated extremely 

high voltage curve and low 

weight ensure max. performance for 

your model. Especially the V-MAXX 

40C - 60C-series sets new standards 

in battery technology. Features: New 

technology for lower weight 

● Reduced internal resistance for cooler 

running 

● Higher cycle tolerance for longer effective 

life 

● Extremely high voltage curve, especially 

in the case of the V-MAXX series 

● Batteries in a protective case are 

particularly well suited for operation 

in RC cars as well as in model boats 

and aircraft; especially as receiver 

batteries 

● The double-sided connector system 

makes it possible to connect multiple 

batteries in series easily 

● High-current connector system included 

Type LiPo Battery V-MAXX 

60C 1S2P/5800 3.7V 

140 

141 


Specification 


G4 


LiPo Battery V-MAXX 

50C 3S2P/6800 

11.1VG3.5 

LiPo Battery V-MAXX 

50C 4S2P/5600 

14.8VG3.5 

Order No. 99005 99006 99007 

Dimensions (LxWxH) mm 93 x 47 x 18,5 138 x 47 x 49 138 x 47 x 49 

Applicable controllers 97163, 97164 97169 97169 

All-up weight, approx. g 150 575 593 

Capacity mAh @10 A typ. 5500 @10 A typ. 6600 @10 A typ. 5400 

Max. discharge current A * 100 (* max. current * 100 (* max current * 100 (* max. current 

of connector system) of connector system) of connector system) 

Plug connector G4 G3,5 G3,5 

Cell count/Voltage V 1S2P / 3,7 3S2P / 11,1 4S2P / 14,8 

Charging technology



The LiPo series from Graupner has an 

extremely high load capability. As a result 

the packs remain much cooler in 

normal use (20-30C), and last for many 

more charge / discharge cycles than 

batteries with lower max. load capacity. 

These high reserves of performance 

give the batteries plenty of power even 

after a large number of flight cycles, 

which means that they remain suitable 

for their primary purpose longer than 

other batteries. The low internal resistance 

coupled with the associated extremely 

high voltage curve and low 

weight ensure max. performance for 

your model. Especially the V-MAXX 

40C - 60C-series sets new standards 

in battery technology. 

Characteristics: 

● New technology for lower weight 

● Reduced internal resistance for cooler 

running 

● Higher cycle tolerance for longer effective 

life. 

● Extremely high voltage curve, especially 

in the case of the V-MAXX series. 

● Batteries in a protective case are 

particularly well suited for operation 

in RC cars as well as in model boats 

and aircraft; especially as receiver 

batteries 

● The double-sided connector system 

makes it possible to connect multiple 

batteries in series easily 

● High-current connector set included 


Li Battery controller 1 S....4S 


Digital voltage meter with clearly arranged 

LED display bar and fast measurement 

cycle for monitoring your onboard 

batteries. The display range can 

be set to the required measurement 

range for various batteries using the 

two integrated micro-switches. 

● Suitable for 1 to 4 Li-cells 

● Can be used universally in the entire 

model building range 


99013 

Type LiPo Battery V-MAXX50C LiPo Battery V-MAXX60C LiPo Battery V-MAXX60C LiPo Battery V-MAXX60C LiPo Battery V-MAXX60C LiPo Battery V-MAXX60C 

2S/4000 7.4V G4 

2x1S3P/5600 3.7V G4 2S2P/6200 G.3.5/G4 7.4V 2S2P/6200 7.4V G4 2S2P/5800 G3.5/G4 7.4V 2S2P/5800 7.4V G4 

Order No. 99008 99009 99010 99011 99012 99013 

Dimensions (LxWxH) mm 138 x 47 x 24 (gerundet, 

Stickform) 

2 Stk. 69 x 47 x 25 138 x 47 x 25 138 x 47 x 25 138 x 47 x 23,5 138 x 47 x 23,5 

Applicable controllers 97168 97168 97168 97168 97168 97168 

All-up weight, approx. g 210 285 305 305 290 290 

Capacity mAh @10A typ. 3600 @10A typ. 5300 @10A typ. 5700 @10A typ. 5700 @10A typ. 5300 @10A typ. 5300 

Max. discharge current A * 100 (* max. current of * 100 (* max. current of * 100 (* max. current of * 100 (* max. current of * 100 (* max. current of * 100 (* max. current of 

connector system) connector system) connector system) connector system) connector system) connector system) 

Plug connector G4 G4 G3,5 / G4 G4 G3,5 / G4 G4 

Cell count/Voltage V 2S / 7,4 2 Stk. 1S3P / 2x 3,7 2S2P / 7,4 2S2P / 7,4 2S2P / 7,4 2S2P / 7,4 

142 143 

Specification 

99010 

99012 


Charging technology

Electric motors and accessories 

BRUSHLESS GM PRO 

BRUSHLESS GM PRO 5,0 star 

wound metall 

Order No. 97285.0 

BRUSHLESS PRO 

BRUSHLESS GM PRO 10,5T metall 


BRUSHLESS PRO 



BRUSHLESS PRO 



BRUSHLESS PRO 

BRUSHLESS GM PRO 21.5T metal 


BRUSHLESS PRO 

● Lighter only about 170g 

● Shorter, for optimal weight 

distribution 

● Optimal cooling 

● Extra-thick multiple windings 

● Sintered neodymium magnets 

● Sensors conforming with IFMAR / 

EFRA / DMC rules 

● Angled sensor connector for better 

protection 

● EFRA and DMC legal 

● High-performance free-running 

ballraces 

● Sensorless running possible with 

GM-BRUSHLESS speed controllers 

● 5 possible motor timing positions 

97286.3 

95153 



95153 BALL BEARING 

97286.3 Sintered magnet 12,5mm for BL SPORT/PRO 

97289.1N Sensor-PCB lieg. f.SPORT/PRO STERN NEU 

97289.3 Magnet 12,5mm EFRA STOCK SPEC 



Cooling fan, 40x40x10 mm 2894.L40 1 

Sensor cable 11cm telemetry connection 97168.T 1 

Sensor cable 180 mmfor EFRA/IFMAR motors 97286.4 1 

100 mm sensor lead for GM-Genius / BL Sensor M. 2894.4 1 

200 mm sensor lead for GM-Genius / BL Sensor M. 2894.8 1 

G3.5 sockets, gold-plated, for printed circuit board 

assembly (10 pcs.) 

2969.PCB 1 

G3.5 high-current connector, gold-plated, for circuit 2970.PCB 1 

board assembly (10 pcs.) 

Gold sleeves 3.5 mm(10 pcs.) 94653.B 1 

Special high-performance motor ballrace 95203 1 

CERAMIC BALL BEARING 95206 1 

Shim Washers for motors (thin) 97341 1 

Motor spacer washers, 0.5 mm 97342 1 

O-ring set, 0.5 mm(4) and 1 mm (4) 97343 1 

Anthracite rear case cover with infinitely variable timing for 

star windings 

97283.8 1 

Type BRUSHLESS GM PRO 5,0 star BRUSHLESS GM PRO 10.5T BRUSHLESS GM PRO 13,5T BRUSHLESS GM PRO 17.5T BRUSHLESS GM PRO 21.5T 

wound metall 

metal 

metal 

metal 

metal 

Order No. 97285.0 97350 97353 97357 97361 

Number of poles 2 2 2 2 2 

Operating voltage range V 3,7 ... 7,4 3,7 ... 7,4 3,7 ... 7,4 3,7 ... 7,4 3,7 ... 7,4 

Recommended controller 97168 97163 97163 97163 97163 

Free shaft length mm 15 15 15 15 15 

Case length mm 51,5 51,5 51,5 51,5 51,5 

Case diameter mm 35,8 35,8 35,8 35,8 35,8 

All-up weight, approx. g 170 170 170 170 170 

Overall length, approx. mm 68 68 68 68 68 

LiPo battery, Order No. 99005 - 99013 99008 - 99013 99008 - 99013 99008 - 99013 99008 - 99013 

Magnet sintered 12,5 mm sintered 12,5 mm EFRA Stock sintered 12,5 mm EFRA Stock sintered 12,5 mm EFRA Stock sintered 12,5 mm EFRA Stock 

Max. output at nominal voltage W 725 460 330 230 140 

Nominal voltage V 7,4 7,4 7,4 7,4 7,4 

Charging rate at max. output at nominal 

voltage A 

285 140 100 66 40 

Charging rate at max. efficiency A 95 45 33 22 13 

Transmission 1:10 touring cars 1:5,0 ... 1:8 1:10 touring cars 1:6 ... 1:9 1:10 touring cars 1:6 ... 1:9 1:10 touring cars 1:4,5 ... 1:7 Crawler 

Off-Road 1:12,5 ... 1:15 Off-Road 1:9 ... 1:12 

Off-Road 1:9 ... 1:12 

Off-Road 1:7 ... 1:10 

Revolutions/Volt 7000 3500 2550 2050 1650 

Shaft diameter mm 3,17 3,17 3,17 3,17 3,17 

Turns 5,5 T stern 10,5 T stern 13,5 T stern 17,5 T stern 21,5 T stern 

Permissible motor direction R and L R and L R and L R and L R and L 

144 

145 

Specification 

97286.4 

Electric motors

OS motors 

OS model aircraft motors, OS model helicopter motors 

OS MAX 25AX mit Schalldämpfer 


4.07 cc displacement. 

Dual ball bearing supported aircraft 

motor with ringless OS-special piston/ 

cylinder set. For less dangerous 

adjustment, the motor‘s regulating 

needle points backward. Aong with 

additional improvements, this mortor 

series provides about 15% more power 

than ist predecessors. 

Recommended propellers 

Order no. 1318.23.20 

Order no. 1318.25.15 

146 

2763 

OS MAX 65AX 



Dual ball bearing supported high- 

performance motor with great power 

and long life, suitable for all kinds of 

aircraft models, especially for aerobatic 

and scale models. 

Recommended propellers 

Order no. 1318.30.15 

Order no. 1318.33.15 

2771 

OS MAX FS-95V mit Schalldämpfer 

SSM-Compact SUPERHET 



High-performance four-stroke motor 

suitable for all kinds of aircraft models. 

● Uniform quality, high performance 

and reliability, long life 

● Easy-to-adjust 60P carburettor with 

idle regulator needle 

2768 

OS MAX 91 HZ-R 



High-performance helicoptor motor for 

class 50 helicopters. 

OS MAX 55HZ Hyper 

Limited Edition 


On the occasion of the „Heli-Jamboree 

2010“, the world‘s largest 3D helicopter 

event, with over 950 registered pilots, a 

limited edition of the proven OS MAX 

55 HZ Hyper Helicopter Engine is 

available starting immediately. 

The OS MAX 55 HZ Limited Edition as 

well as the high-performance shock 

absorbers included in delivery are 

anodized black and have an OS serial 

number. With performance equivalent 

to the conventional class 60 motors, 

this limited edition is a „must have“ for 

3D helicopter pilots of class 50. 

● 8.93 cc displacement 

● High-performance helicopter motor 

for class 50 helicopters 

● Including OS high-performance 


2775 

2766 

Specification 

Type OS MAX 25AX silencer, included OS MAX 65AX, silencer included OS MAX 55HZ Hyper Limited 

Edition 

OS MAX FS-95V OS MAX 91 HZ-R 

Order No. 2763 2771 2766 2768 2775 

Distance of screw hole /longitudinal 

mm 

15 25 17,5 25 25 

Distance of screw hole / crosswise mm 38 52 44 52 52 

Diameter of fixing hole mm 3,2 4,2 3,2 4,2 4,2 

Width mm 45 60 52 61 61 

rpm range, approx. U/min 2500 - 17000 2500-12000 2000-20000 .... 2000-16000 

Recommended for Sport and Aerobatic Sport and Aerobatic 

Recommended propeller 9x5-6, 9,5x5, 10x5 1318.30.15 

All-up weight, approx. g 358 497 408 .... 625 

Height approx. mm 59,2 78,5 91 119 108,7 

Stroke mm 16 23,5 21,5 .... 24,8 

Cylinder capacity cm³ 4,07 10,63 8,93 15,55 14,95 

Length to hub mm 75,5 93,3 76,6 83,8 

Overall length, approx. mm 99,5 129 

Output (kW, PS) kW (PS) 0,59 (0,8) 1,75 (3,36) 1,57 (2,13) .... 3,4 (4,59) 

Output (kW, PS) at U/min 16000 16000 17000 .... 15000 

Carburettor 21L 61D 40L 69P 61B 

Shaft thread UNF1/4“-28 UNF 5/16“-24 UNF 1/4“-28 UNF-5/16“-24 UNF 1/4“-28 

Bore mm 18 24 23 .... 27,7 

147 

Combustion motors

OS motors 

OS model car motors 

OS MAX 21 XZ-B 



The new OS MAX 21 XZ-B motor is the 

next step in the continued development 

of the legendary world championship 

(2008) class OS V-Spec series and is 

sure to continue the successful march 

of this series in the 1/8 offroad area. 

Important changes in details deliver 

maximum performance along with 

optimized fuel consumption. Among 

other things, the equipment includes 

the new 21J2 carburettor with 7mm 

Venturi. The proven P3 turbo sparkplug 

ensures reliable and powerful operation 

in all rpm ranges. 

2776 

OS SPEED 21 XZ-B 



The OS SPEED 21 XZ-B motor is the 

tuned variant of the 21 XZ-B. The 

highest quality materials and tightest 

tolerances provide an 8% increase in 

driving time as well as better 

performance and reliability, giving you 

a decisive edge in tough competition. 

The proven P3 turbo sparkplug ensures 

reliable and powerful operation in all 

rpm ranges. 3 different Venturi inserts 

are included in delivery. 

2777 

OS MAX 12XZ 



The OS Max 12 XZ is a high- 

performance competition motor, 

developed especially for the 1/10 scale 

on-road class on a scale of 1:10. 

State-of-the-art motor technology 

delivers a broad usable rpm range in 

conjunction with maximum power and 

low fuel consumption. 

OS SPEED 12 XZ II 



The OS Max 12 XZ II is already the 

second tuning variant of the OS 12 XZ 

motor. Through consistent further 

development and the use of the finest 

materials, it sets the standard in the 

1:10 scale competition class. The best 

acceleration and extremely high rpms 

of up to 44.000 rpm ensure a fantastic 

top speed. The motor of choice for 

every racer. 

2778 

2779 

Specification 

Type OS MAX 21 XZ-B OS SPEED 21 XZ-B OS MAX 12XZ OS SPEED 12 XZ II 

Order No. 2776 2777 2778 2779 

Distance of screw hole /longitudinal 

mm 

21 21 11 11 

Distance of screw hole / crosswise mm 37 37 31,4 31,4 

Diameter / inboard mm 3,3 3,3 

Diameter of fixing hole mm 3,3 3,3 

Width mm 45 45 39 39 

rpm range, approx. U/min 4000-40000 4000-40000 5000 - 40000 5000 - 44000 

Recommended for Off-Road M 1:8 Off-Road M 1:8 On-Road 1:10 On-Road 1:10 


Height approx. mm 110 110 84,4 84,4 

Stroke mm 16,8 16,8 14,0 14,0 

Cylinder capacity cm³ 3,5 3,5 2.1 2.1 

Length to hub mm 69,9 69,9 50 50 

Output (kW, PS) at U/min 1,83 (2,5) 1,9 (2,6) 1,22 (1,65) at 34000 1,30 (1,75) at 35000 

Carburettor 21J2 21J2 (B) 12F 12F 

Shaft thread 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 1/4“-28 UNF 

Bore mm 16,3 16,3 13,8 13,8 

148 

149 

Combustion motors

Accessories for airplane models 

Dummy pilot 

Dummy pilot Jet 


Completely painted pilot figure for use 

in cockpits in aircraft models 

Dummy pilot Sport 





Order No. 970.11 



Dummy pilot Jet 








Dummy pilot Oldtimer 














Specification 

Type Dummy pilot Jet Dummy pilot Jet Dummy pilot Sport Dummy pilot Sport Dummy pilot Sport Dummy pilot Oldti- Dummy pilot Oldti- Dummy pilot Oldtimermermer 

Order No. 916.4 916.5 970.10 970.11 970.12 970.13 970.14 970.15 

Width mm 77 91 80 112 127 109 88 78 

Height, approx. mm 91 99 75 97 123 93 81 81 

Props, spinner 

GRAUPNER ELECTRIC PROP 

● Propellers optimised for electric motors 

● High blade expansion 

● Thin blade profile 

● GRP-reinforced 

● Low weight 

● Various sizes available as left-running 

design 

Type GRAUPNERELEKTRO GRAUPNERELEKTRO GRAUPNERELEKTRO GRAUPNERELEKTRO GRAUPNERELEKTRO GRAUPNERELEKTRO 

PROP 

PROP 

PROP 

PROP 

PROP 

PROP 

Order No. 1326.12X6 1326.14X10 1326.14X8L 1326.17X10 1326.22X10 1326.22X12 

Diameter / Hub bore mm 8 8 8 8 10 10 

Diameter / Pitch cm 30/15 36/25 36/20 43/25 55/25 55/30 

Diameter / Pitch (Inch) „ 12/6 14/10 14/8 17/10 22/10 22/12 

150 151 

Specification 

Accessories for model-making

Accessories for airplane models 

Props, spinner 

Example of use with brushless motor INLINE 475 11.1V 

CAM FOLDING PROP18x10 cm 

Order No. 1335.18.10 

● Ideal folding propeller for INLINE motors 

● Optimally suited for Hotline models 

● Design with 8-mm blade root width for safe operation at high rpms 

● Top concentricity due to precision steel clamping cone 

● Spinner Ø 32mm 

● For engine shaft Ø 3.17mm 

● Total weight 25g 

CAM FOLDING PROP, replacement blades 18x 10 cm 

Order No. 1336.18.10 

CAM FOLDING PROP propeller blades 

The propeller blades packaged in pairs can be used as replacement blades or 

in combination with spinners, which are also available individually. 

● Very good efficiency and wide working range 

● A blade profile calculated especially for each blade is the prerequisite for the 

best possible aerodynamics 

● CAM (computer-aided manufacturing) guarantees tight tolerances and top 

precision 

Precision spinner 38 mm for shaft 3.17 

Order No. 1385.383 

● Especially well suited for INLINE motors 

● Suitable for motor pylon order no. 2910 

● Spinner Ø 38 mm 

● For engine shaft Ø 3.17 mm 

● Weight about 20 g 

Half-shell for motor pylon 

Order No. 9401.24 

ABS for motor pylon order no. 9401.22 permts installation of various electric 

motors of the SPEED 300 size. Delivery includes three 3.5 sockets and three 

connectors. 

For spinner diameter of about 25 mm, total weight 18 g. 

Retractable undercarriage with brake for 

RC glider models 

Order No. 1137 

Sturdy retractable undercarriage made of 

steel and aluminium. 

Due to the favourable lever conditions and the 

installation of a coil spring, the power needed 

for retracting/extending is very slight, so that 

no special servo is needed. Weight with wheel 

about 430 g for wheels up to Ø 85 mm 

For example, order no. 165.85 

Bearing block for bow landing gear 

Order No. 191 

For secure attachment of controllable 

bow landing gear with a wire Ø of 6 mm. 

Aluminium. Interval between attachment 

holes, across 22 mm 

Height 22 mm 

Weight about 52 g 

Rope-parachute 

Order No. 19 

Rope parachute 

In accordance with competitive rules F3J 

Canopy sewn together from eight panels, sturdy, sewn-through, thin Kevlar lines 

152 153 


Universal accessories 

Model boat accessories 

Graupner Pump Jet 


A propulsion system for ships models 

based on the same functional principle 

as the Schottel pump jet. In shipbuilding, 

pump jets are used as drive systems 

flush with the hull as an alternative 

to lateral thrusters. Since they are adjustable, 

however, they can also be 

used as auxiliary motors by changing 

the direction of the thrust. 

The Graupner pump jet takes in water 

at the underside and then expels it laterally 

next to the intake opening. The 

control system makes it possible to 

move the rotating pump 360° using the 

REGATTA eco sailing winch. With appropriate 

maintenance, the sturdy metal 

construction, quadruple ballracing, 

and sealing via multiple shaft sealing 

rings makes the Graupner pump jet suitable 

for long-term use. For servicing, 

the drive unit can be unscrewed from 

the well that is glued into the hull. 

Size and performance are designed for 

the BERNHARD GRUBEN, but it can 

also be used in other model ships of 

comparable size. 

Technical Data 

● Drive motor Compact 300Z 11.1V 

● Operating voltage 10 ... 12 V 

● Jet housing Ø about 32 mm 

● Total height about 84 mm 

● Total width about 71 mm 

● Total length about 138 mm 

● Total weight about 520 g 

● Hull opening about 38 mm 

Included in delivery 

Pre-installed Graupner pump jet, 

cogged belt pully, drive belt, cogwheel, 

well, small parts, and instructions 

Not included are the brushless motor 

COMPACT 300Z, the sail winch RE- 

GATTA eco, and a suitable speed controller, 

e.g. order no. 7721 or 7232 

Exchange joint 2,0mm 


Exchange joint 4,0mm 


The shaft coupling is made of highquality 

plastic and has inset metal 

hubs. The compensating unit is used 

for greater differences in height and for 

drive units arranged at an angle. The 

functional angle per joint is a maximum 

of 10°. Universal joints expand the possibilities 

for connections. 

Deck worker figure 1:50, standing 


Completely painted figure for use on 

working ships 

Universal accessories 

Heat shrink tube, 25mm, black, 1 m 

Order No. 3479.25 


Order No. 3479.55 


Order No. 3479.65 

Heat shrink tube, 100mm, black, 1 m 


● Ideal for heat-shrink covering of 

batteries or other parts 

● High shrink factor 

● Shrinkable using hair dryer 

● High-gloss black 

● Each package contains 1 m 

Peaked cap, „Winter“, Fleece version, 



This peaked cap with the embroidered 

name „Graupner“ is made of 100% polyester 

fleece material and has folddown 

ear flaps. The cap is thus perfectly 

suited for the cold season. 

Thanks to the adjusting snaps, one size 

fits all. 

154 155 


For product registration please go to 

www.graupner.com, menu Service. 

Your GRAUPNER product is registered for free 

and you will be kept up-to-date. 

• Upgrades 

• Technical support 

• Event notes 

• Offers 

This brochure 

only shows the 

New Items for 2011 

The main GRAUPNER 

catalogue is over 1000 

pages long and covers 

our entire range of 

modelling products 

We reserve the right to alter specifications. All items subject to availability. GRAUPNER products are available 

exclusively through model shops, where you will find expert advice and assistance. We will gladly let you know the 

address off your nearest supplier. We accept no liability for printing errors • 1st edition 1/2011 • Printed in Germany 

GRAUPNER GmbH & Co. KG • Postfach 1242 • D-73220 Kirchheim/Teck • Germany

re he 11 R 00 rs of ts - Graupner

Create successful ePaper yourself

Delete template?

Save as template?