DAUERHOLZ material data

MATERIAL dATA
DAUERHOLZ raw material:
Deformation stability:
Durability guarantee:
Manufacturing process:
Compressive strength:
Non-slip properties:
Processing:
Application:
Chemical ingredients:
Environmental aspect:
Durability:
Fire performance:
Recycling:
Wood component: regional and PEFC-certified woodtypes (pine)
Wax component: food-safe paraffin wax
Significantly less deformation on absorption/release of moisture
Guaranteed 15 years of protection against wood-destroying factors such as moisture,
fungi, parasites (applies for installation in the private sector)
Wood (pine) raw material is fully impregnated with wax as far as the wood core
Significantly increased compressive strength based on DIN 68364 – min. 25 % higher
than untreated wood
Complies with classes R 11 to R 12 = increased non-slip properties in accordance with
DIN 51130, classes B to C as per DIN 51097
Easily possible using standard wood-processing machinery and tools
Eminently suitable for outdoor applications, whereby no extra protection (chemical
wood treatment) is required
None
Exclusive use of indigenous and PEFC-certified swood
Complies with class 1 (very durable) in accordance with the EN 350-1 and EN 350-2 standards
Flammability tested in accordance with DIN 41021-1 building material class B2 –
normal flammability
Can be easily redirected to the standard recycling circuit

CERTIFICATES
Durability class:
Fire performance:
PEFC certification:
Slip resistance:
Compressive strength:
Hardness:
EN 350-2 in screening process
Result: Durability class I
to DIN 4102-1: 1998
Result: Building material class B2 (normal flammability)
Result: PEFC 04-31-1437 Certificate
Non-slip properties
Result: DIN 51130: R 11 to R 12
Increased slip resistance, e. g. for sanitary areas
Result: DIN 51097: B to C
Wet barefoot area, C = highest level
to DIN 52185/DIN 68364
Result: up to 90 % higher than for untreated wood
to EN 1534
Result: up to 50 % higher than for untreated pine