tanco autowrap 280 cs operators handbook wd66-280-m0207

More documents

Recommendations

Info

$VARAOSAKIRJA\RESERVDELAR\SPARE PARTS\ERSATZTEILE ...$

$VARAOSAKIRJA\RESERVDELAR\SPARE PARTS\ERSATZTEILE ...$

13. Hydraulic Circuit Diagram 280 CS - 33 - Tanco Autowrap 280 CS Operator’s manual
14. Configuring the valve for Closed centre hydraulics. 34 Tanco Autowrap 280 CS Operator’s manual Most tractors are fitted with Open Centered Hydraulic systems. For this reason, our valves are set-up as standard for open centers. However some tractors (e.g. John Deere) use closed centered systems. Consult your dealer if you are unsure about your system requirements. To convert to closed centers a plug must be changed in the valve block. This plug is located on the valve just beside the outlet (T line). Remove the existing one and replace with closed center plug (Part No. Z01-03-A580J). If you are likely to change frequently between open and closed centered hydraulic systems and special plug incorporating a tap can be ordered. (Part No. 1008050- closed center tap plug). This is fitted in the same position on the valve.
Page 1 and 2: TANCO AUTOWRAP 280 CS OPERATORS HAN
Page 3 and 4: Table of Contents 2 Tanco Autowrap
Page 5 and 6: 18. Keep clear of the machine opera
Page 7 and 8: 1.1. SPECIAL SAFETY INSTRUCTIONS 6
Page 9 and 10: Dimensions 2. TECHNICAL SPECIFICATI
Page 11 and 12: Mounting Dispenser mast 10 Tanco Au
Page 13 and 14: 3.7. Operational test 12 Tanco Auto
Page 15 and 16: 7. Electrical Circuit Diagram 280-C
Page 17 and 18: 1. Introduction 16 Tanco Autowrap 2
Page 19 and 20: 3.1.2 Programme the Target Wraps Pr
Page 21 and 22: 20 Tanco Autowrap 280 CS Operator
Page 27 and 28: 10. Film, Overlap System 26 Tanco A
Page 29 and 30: 8. Shear Pins 28 Tanco Autowrap 280
Page 31 and 32: 12.2. Gear Box Chain Drive tensioni
Page 33: 12.5. Cut & Start Cylinder - rechar
Page 37 and 38: BALE MOVEMENT ON MACHINES 36 Tanco

tanco autowrap 280 cs operators handbook wd66-280-m0207

Create successful ePaper yourself

Delete template?

Save as template?