Semiconductor Characterization System Technical Data - Helmar
Semiconductor Characterization System Technical Data - Helmar
Semiconductor Characterization System Technical Data - Helmar
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Model 4200-SCS <strong>Technical</strong> <strong>Data</strong><br />
SEmIcondUcTor<br />
4<br />
4200-ScS <strong>Semiconductor</strong> <strong>Characterization</strong> <strong>System</strong><br />
<strong>Technical</strong> <strong>Data</strong><br />
1.888.KEITHLEY (U.S. only)<br />
www.keithley.com<br />
configuration Examples<br />
The 4200-SCS’s plug-in chassis design offers exceptional configuration flexibility, as the following<br />
examples illustrate. A chassis can contain up to nine SMUs in any combination of high and medium<br />
powered units. Any configuration can be specified without a flat panel display by substituting the<br />
4200-SCS/C for the 4200-SCS/F. However, an external SVGA monitor is required to operate the<br />
4200-SCS/C. Basic <strong>Characterization</strong> <strong>System</strong> Configuration<br />
Basic characterization <strong>System</strong> configuration<br />
Configuration: One (1) Model 4200-SCS/F<br />
Three (3) Model 4200-SMU medium power SMUs<br />
One (1) Model 4200-PA Remote PreAmp module<br />
One (1) Remote Sense Ground Unit<br />
Description: A general-purpose configuration for characterizing transistors and other devices.<br />
maximum dc configuration<br />
Configuration: One (1) Model 4200-SCS/F (includes two medium power SMUs as the standard<br />
configuration, which can be substituted with two high power SMUs)<br />
Seven (7) additional Model 4210-SMUs (total of nine; all nine can<br />
be high power SMUs)<br />
Nine (9) Model 4200-PA Remote PreAmp modules<br />
Description: Provides a nine-SMU system with 0.1fA sensitivity on all nine SMUs<br />
and 1A capability on all nine channels.<br />
maximum Pulse configuration<br />
Configuration: One (1) Model 4200-SCS/F<br />
Four (4) Model 4205-PG2 dual-channel pulse generators (8 channels)<br />
One (1) digital oscilloscope (Model 4200-SCP2 or 4200-SCP2HR)<br />
Four (4) Model 4200-SMUs<br />
Four (4) Model 4200-PA Remote PreAmp modules<br />
Description: Provides a four-SMU system with eight channels that support traditional pulse<br />
mode, arbitrary waveform mode (ARB), Segment ARB waveform mode<br />
(Segment ARB or SARB), and trigger-in. Each pulse channel contains an inline<br />
High Endurance Output Relay (solid-state relay). The oscilloscope provides pulse<br />
measure and waveform monitoring.<br />
Example Broad Use case configuration<br />
Configuration: One (1) Model 4200-SCS/F<br />
Three (3) Model 4205-PG2 dual-channel pulse generators (8 channels)<br />
One (1) digital oscilloscope (Model 4200-SCP2 or 4200-SCP2HR)<br />
Four (4) Model 4200-SMUs<br />
Four (4) Model 4200-PA Remote PreAmp modules<br />
One (1) Model 4210-CVU Capacitance-Voltage Instrument<br />
Description: Provides an ultra-flexible multi-use system for a broad range of parametric tests,<br />
including very low-level DC measurements, C-V, and pulse sourcing.<br />
A G R E A T E R M E A S U R E O F C O N F I D E N C E