C O N T E N T S - MSC Software
C O N T E N T S - MSC Software
C O N T E N T S - MSC Software
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CADDS<br />
CHAPTER 1<br />
<strong>MSC</strong>.Patran 2005 at a Glance<br />
IBM RS/6000 W2K Linux<br />
2004r2 2005 2004r2 2005 2004r2 2005<br />
I-DEAS 9.0 10.0 9.0 10.0<br />
CATIA V4 4.2.4 4.2.4 4.2.4 4.2.4 4.2.4 1<br />
CATIA V5 V5R12 V5R13 V5R12 V5R13<br />
Pro/ENGINEER 2<br />
2001 2001<br />
Wildfire<br />
2.0<br />
Wildfire<br />
2.0 2001 4<br />
Unigraphics NX2.0 NX2.0 NX2.0 NX2.0 XMT 3<br />
Parasolid 15 15 15 15 15 15<br />
4.2.4 1<br />
2001 4<br />
XMT 3<br />
ACIS 12.0 13.0 12.0 13.0 12.0 13.0<br />
Note: 1 For <strong>MSC</strong>.Patran 2005, a CATIA CATXPRES (.cat) file can be imported. The CATIA to<br />
Parasolid translator is available. The CATDirect translator which runs CATIA in batch<br />
mode is not available.<br />
2 The p3_ProE and p3_ProENGINEER executables are built using Pro/ENGINEER<br />
version 2000i and therefore will not work with earlier versions of Pro/ENGINEER.<br />
3 Only Parasolid (transmit file) import is supported in this release. Parasolid transmit<br />
files generated on other OS platforms can be imported on LINUX.<br />
4 Pro/ENGINEER Access allows reading of "*.geo" geometry transfer files generated<br />
from other OS installs of Pro/ENGINEER Access.<br />
Pro/ENGINEER Installations<br />
We recommend upgrading your Pro/ENGINEER installation to Wildfire. If this is not<br />
possible, we have provided a temporary work around, by providing previous version<br />
executables and associated scripts. To run previous versions, it is necessary for your<br />
system installation manager to rename some of the delivered files after <strong>MSC</strong>.Patran<br />
has been installed.<br />
13
Change language