TigerAccess Extended Ethernet System - SMC

Panel Display
PANEL DISPLAY
The Web agent displays an image of the switch’s ports, indicating whether
each link is up or down. Clicking on the image of a port opens the Port
Configuration page as described on page 2-22.
Main Menu
Using the onboard Web agent, you can define system parameters, manage
and control the switch, or monitor network conditions. The following
table briefly describes the selections available from this program.
Menu
System
Description Page
System Information Shows the number of ports, hardware/
firmware version numbers, and power status
2-9
IP Sets the IP address for management access 2-11
Passwords Assigns logon password 2-14
Radius Configures RADIUS authentication
parameters
2-15
Firmware Manages code image files 2-17
Configuration Manages switch configuration files 2-18
Reset Reboots the switch 2-22
Bridge Extension Shows the configuration for bridge
extension commands; enables GVRP
multicast protocol
2-22
Switch Information Shows the number of ports, hardware/
firmware version numbers, and power status
2-24
2-5