TigerAccess Extended Ethernet System - SMC

BASIC CONFIGURATION
Command Usage
• The destination file name should not contain slashes (\ or /), the
leading letter of the file name should not be a period (.), and the length
of the file name should be 1 to 31 characters. (Valid characters: A-Z,
a-z, 0-9, “.”, “-”, “_”)
• The maximum number of runtime files is 2.
Downloading System Software from a Server
When downloading runtime code, specify the same Destination File Name
as the current file to replace the current code file, or first download the file
using a different name from the current runtime code file, and then set the
new file as the startup file.
Web Interface
Click System/Firmware. Enter the IP address of the TFTP server, enter
the file name of the software to download, select a file on the switch to
overwrite or specify a new file name, then click “Transfer from Server.”
If you download to a new destination file, select the new file from the
“Start-Up Operation Code Image File” drop-down box, and click “Apply
Changes.”
2-17