Historic Environment Record Search - Wychavon District Council
Historic Environment Record Search - Wychavon District Council
Historic Environment Record Search - Wychavon District Council
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
HER Number<br />
WSM38650<br />
Report prepared by Worcestershire HER. Tel<br />
01905 765560 or email<br />
archaeology@worcestershire.gov.uk.<br />
Information valid for three months from date of<br />
production.<br />
WMID1837. Single loop trapezoidal shaped buckle. The notched edge of the loop is expanded. The three other edges are<br />
the same widths and depth. Decoration consists of oblique notches on the edges of the buckle, with the expanded loop have<br />
two incised parallel lines forming an internal border. The reverse has four oblique notches on the expanded loop and traces of<br />
tinning. On the strap bar there is a trace of iron corrosion suggesting there was an iron pin [16].<br />
WMID2263. Harness Pendant. The body of the pendant is a small quatrefoil which has a high relief square shape in the<br />
centre. Protruding from the upper petal is a lug perpendicular to the pendant. This lug has a small hole within which there are<br />
traces of iron. The lug is bent forwards slightly. The reverse is plain [17].<br />
WMID4636. Dress Hook. The body of the dress hook is sub-circular with a rectangular loop protruding from the upper edge.<br />
Decoration of the body of the object consists of a border of annulets around a central larger annulet. Protruding from the lower<br />
edge is a hook which is semi-circular in cross-section and 'U' shaped in profile. The reverse is undecorated [18].<br />
WMID5223. The fabric of the sherd which remains is a grey colour with an ornage exterior surface. The exterior surface is<br />
covered with a mid green coloured glaze. The vessel had been mended by lead. There appears to have been two holes in the<br />
vessel thereby the lead forms a loop around the sherd. The exteror surface of the lead is an irregular shape and appears to<br />
have been shaped by a two fingers because fingerprints are visible. On the interior of the vessel the lead is a relatively narrow<br />
band [19].<br />
WMID588. Dress Hook. Triangular shape with a rivet hole in each top corner. The lower third corner has a possible worn<br />
zoomorphic head that leads to a hook. The border of the tag has an incised border groove which has perpendicular lines from<br />
the incised line to the edge [20].<br />
WMID607. Circular cloth seal. Obverse has [ ] LEMS GO [ ] around the edge with a sword in the centre. The reverse has<br />
stars and lozenges around the edge and 2[ ] in the centre. The seal is two circular discs joined by a narrow band. The centre<br />
of the reverse appears to have been cut into a separate circular disc. Could this have been caused by the die? [21].<br />
WMID6091. Medieval Silver Coin [22].<br />
WMID628. Brooch. Only the upper plate remains. The plate is sub-trapezoidal in shape, with a knop on three sides of the<br />
plate. There is an elongated trapezoidal platform in the centre of the plate. From this platform an arched strip of copper alloy<br />
forms which has a broken edge, but which would have formed the upright of the brooch. On the reverse is a vertical<br />
protruding plate which is incomplete [23].<br />
WMID660. Buckle. Narrowed and offset strap bar. Diagonal lines on the upper face as decoration. Part of the pin remains<br />
curled around the strap bar [24].<br />
WMID661. Appears to be a rams head and neck. Ornate style. The reverse is straight and a flange it 90º runs across the<br />
upper edge. Something has broken off the base of the item. Possibly a mount? [25].<br />
WMID674. Strap Fitting. The lower plate is sub-circular with four rivets in each corner. The upper plate is also sub-circular,<br />
however there is an oval shaped openwork at one end, leaving a small gap on the edge. On the upper plate there is incised<br />
decoration which appears to be two leaves creating a 'V' with a fleur-de-lis at the centre base. At this base there is a further<br />
rectangular shape which the lower plate lacks. This rectangular shape is moulded with two rows of four circular indentations.<br />
Two outer indentations are openwork, but maybe too small for rivets. Between the lower and upper plate there are traces of<br />
leather [26].<br />
WMID675. Seal Matrix. Oval base. Hexagonal stem terminating in a trefoil loop. The device is a bird, like an heraldic eagle<br />
[27].<br />
WMID676. Two long-cross hammered coins, both folded in half and interlocked with each other, forming a flat conical shape.<br />
One is a York penny, the other a Durham mint. Both Edward I [28].<br />
Sources<br />
(1) Internet Site: British Museum. 2007. Portable Antiquities Scheme.. The British<br />
Museum. WAW-739F07<br />
SWR9225<br />
(2) Internet Site: British Museum. 2007. Portable Antiquities Scheme.. The British<br />
Museum. WAW-89BDE3<br />
SWR9225<br />
(3) Internet Site: British Museum. 2007. Portable Antiquities Scheme.. The British<br />
Museum. WAW-969902<br />
SWR9225<br />
Report generated by HBSMR from exeGesIS SDM Ltd<br />
Page 29