FlowMaster™ Rotary Driven Electric Pump - Lincoln Industrial

More documents

Recommendations

Info

FlowMaster Rotary Driven Electric Pump Maintenance and Repair 25. Push pump element (items 1 through 27) out of housing tube with nylon rod included in tool kit (276275) and hammer. (Reassembly recommendation: replace pump element in housing tube with housing tube slightly loose, then torque housing tube (Item 56a) to pump housing (Item 73) to 20-25 Ft. Lbs. 26. Pull pump element free of housing. Page Number - 12 27. Remove housing tube (Item 56a). (Reassembly Torque: 20 to 25 Ft. Lbs.(27.1 - 33.9 Nm).) 28. Exploded view of housing tube (Item 56a), spacer (Item 56) and Shovel Plug (Item 58). 29. Remove bronze bushing (Item 52). 30. Remove oil seal O-ring (Item 53) and backup washer (Item 59). (Reassembly recommendation: replace O-ring seal and then the O-ring.) Form 403628
31. Remove wrist pin bushing screws (Item 11). (Reassembly torque: 100-110 in. lbs. (11.3 - 12.4 Nm).) Reassembly recommendations: use Loctite 242 or equivalent on screw threads). 32. View of wrist pin bushing (Item 12). 33. Press out wrist pin bushing (Item 12) with 5/16-24 bolt (from 276275 kit), needed since pivot bushings often stick in wrist pin anchor (Item 13a). 34. Remove wrist pin bushing (Item 12). Form 403628 FlowMaster Rotary Driven Electric Pump Maintenance and Repair 35. Remove crankkrod and eccentric assembly (Items 1-7). 36. Loosen wrist pin anchor (Item 13a). (Reassembly torque: 20 - 25 Ft. Lbs. (27.1 - 33.9 Nm).) 37. Remove wrist pin anchor (Item 13a). (Reassemblly recommendations: replace O-ring seal (Item 13b), be sure threads on wrist pin anchor (Item 13a) are clean and free of all oil or other 38. View of plunger tube and plunger tube bushing assembly (Items 10, 10a, 10b, 10c and 10d). Page Number - 13
Page 1 and 2: FlowMaster ® Rotary Driven Electri
Page 3 and 4: the outlet check and discharged to
Page 5 and 6: © Indicates change Form 403628 Flo
Page 7 and 8: Tools Required for Maintenance, Rep
Page 9 and 10: 8. Remove dipstick (Item 30b). 9. D
Page 11: 23. Remove spiral retaining ring (i
Page 15 and 16: 46. Loosen plunger tube (Item 10) f
Page 17 and 18: 57. Remove plunger and bushing asse
Page 19 and 20: 69. Drive ball bearing (Item 7) out
Page 21 and 22: 41 Form 403628 40 37 38 39 37a 43-5
Page 23 and 24: © Indicates change * Included in 2
Page 25: Repair Series B Only Americas: One

FlowMaster™ Rotary Driven Electric Pump - Lincoln Industrial

Create successful ePaper yourself

Delete template?

Save as template?