Series V-316 - Versa Valves

SOLENOID-PILOT ACTUATORS —
DIMENSIONS SHOWN IN INCH
MM
PG-9
Cable Entry -HC
(1/2 NPT conduit
entry -HCC)
ISO Connector
Manual Override
(Suffix -ME)
.75
19.1
Manual Override
(Suffix -ME)
1.62
41.3
Can be rotated
through 360°
1.69
43.0
•
1.62
41.3
1/8 NPT (Suffix - H2)
1/4 NPT (Suffix - H)
•
1/2 NPT
(XIFF)
CABLE
GLAND
(XIFE)
.69
17.5
M5 Threaded
EXH Port
Torque setting for
tightening nut at
assembly is 12 lbf - in (1.4 Nm)
2.82
71.6
.69
17.5
M20 X 1.5
(XIFA)
3.33
84.6
.94
23.9
RSA
RSA USA
RN NL
1.38
35.1
Symbol Designation
In Product Number
Prefi x Suffi x
1/8 NPT Pilot Inlet Port
(on EXPilot Valves only)
.94
23.9
1.38
35.1
1/8 NPT Pilot Inlet Port
(on EXPilot Valves only)
5.6
2 Position (for 3 Position also refer to Drawing at top of
page 5.1)
HAZARDOUS SERVICE
Title and
Sub-assembly Number
SOLENOID-PILOT
Hazardous Locations
{-HC-XISC or –HCC-XISC: Factory Mutual
& CSA approved; Class I, Groups (A, B, C,
& D); Class II, Groups (E, F, & G); Class III,
Div. 1)}
(ia) Intrinsic Safe
{-HC-XISX6 or –HCC-XISX6: ATEX
approved; Zones 0, 1 & 2; (IIC) Category
1G}
Approved Safety Barrier or isolator required.
Max. pilot pressure 115 psi [8 bar].
G and -*-XISC SA-4302-84-316-*-XISC-.+.-D024
G and -*-XISX6 SA-4302-84-316-*-XISX6-.+.-D024
(EXPilot type)
G and -*-XISC SA-4322-84-316-*-XISC-.+.-D024
G and -*-XISX6 SA-4322-84-316-*-XISX6-.+.-D024
(INPilot type)
*Specify identifi cation detail. Detail
-HC: 3 spade terminals and mini DIN
connector with PG9 cable gland
-HCC: 1/2 NPT conduit entry
+options:
Suffi x
-H2 Adapter with 1/8 NPT thread
-ME Manual Override
-L14 Dust Excluder Solenoid Nut
SOLENOID-PILOT
(ib) Intrinsic Safe
{-XIF*: ATEX approved; Zones 1 & 2;
(IIB) Category 1G}
Approved Safety Barrier or isolator required.
Max. pilot pressure 175 psi [12 bar]
G and -XIF* SA-4302-84-316-XIF*-.+.-D024
(EXPilot type)
G and -XIF* SA-4322-84-316-XIF*-.+.-D024
(INPilot type)
*Specify identifi cation detail.
Detail
A: M20 x 1.5 conduit entry.
E: Cable gland for 6-12mm ø cable.
F: 1/2 NPT conduit entry with adapter.
Suffi x
+options: -H Adapter with 1/4 NPT thread
-H2 Adapter with 1/8 NPT thread
-L14 Dust Excluder Solenoid Nut