Series V-316 - Versa Valves

More documents

Recommendations

Info

PILOT ACTUATORS* DIMENSIONS SHOWN IN INCH MM Symbol Designation In Product Number Prefi x Suffi x PILOT-COMBINATION ACTUATORS* DIMENSIONS SHOWN IN INCH MM 4.2 Title and Sub-assembly Number DIAPHRAGM PILOT (for 2 position diaphragm pilot operated valves) W SA-4302-87-316 For low pressure pilot signals DIAPHRAGM PILOT- SPRING CENTERED (for 3 position diaphragm pilot operated valves) Y For low pressure pilot signals SA-4302-88-316 NOTE: Diaphragm piston can be equipped with Tefl on coated Buna N “U” cup. Add suffi x “-31” to complete valve number or sub-assembly number. (PRESSURE) PILOT-TWO DETENT A and -150E CA-4302-64-316-150E (PRESSURE) PILOT-REVERSE SPRING RETURN A and -159E CA-4302-64-316-159E *For Pilot Pressure ranges see page 3.1
SOLENOID-PILOT ACTUATORS — 24” Leads Third Wire Ground Supplied When Requested 1/2 - 14 NPT Conduit Conn Manual Override (Suffix - ME) DIMENSIONS SHOWN IN INCH MM Height dimensions shown are for Nonhazardous solenoids. Dimension for Hazardous solenoids depend upon type of solenoid selected. Suffi x +options: -HT High Temperature Class H coil -H2 adapter with 1/8 NPT thread -L14 Dust Excluder Solenoid Nut -ME manual override -PC potted coil; NEMA 4/4X, IP65 -243 wire leads with grommet type housing PG-9 Cable Entry Mini DIN Connector Manual Override (Suffix - ME) 2 Position (For 3 Position refer also to drawing at top of page) VERSA 10-32 UNF Adapter Option 1/8 NPT (Suffix - H2) 125 31.7 1.62 41.3 2.54 64.6 1.48 37.7 10-32 UNF 1.62 41.3 .57 14.5 3.00 76.2 .69 17.5 2 Position 3 Position 2.11 53.5 .94 23.9 1.38 35.1 1/8 NPT Pilot Inlet Port (on EXPilot Valves only) Adapter Option 1/8 NPT (Suffix - H2) .57 14.5 3.00 76.2 .69 17.5 3.62 92.0 .94 23.9 1.38 35.1 1/8 NPT Pilot Inlet Port (on EXPilot Valves only) Suffi x +options: -HT adapter with 1/8 NPT thread -L14 Dust Excluder Solenoid Nut -ME manual override 5.1 2 Position GENERAL SERVICE (NONHAZARDOUS SERVICE) Symbol Designation In Product Number Prefi x Suffi x Title and Sub-assembly Number SOLENOID PILOT (with threads for conduit connection) G and -U SA-4302-84-316-U-.+.-(**) (EXPilot type) G and -U SA-4322-84-316-U-.+.-(**) (INPilot type) 3 Position — GENERAL SERVICE (NONHAZARDOUS SERVICE) 3 Position — HAZARDOUS SERVICE Any of the solenoids shown on pages 5.3, 5.4, 5.5, and 5.6 can be used on this actuator. X and -.U. SOLENOID-PILOT SPRING CENTERING (for 3 posiition solenoid operated valves) Available for any of the solenoids and respective options shown on pages 5.1, 5.3, 5.4, 5.5 and 5.6. SA-4302-85-316-.U.-.+.-(**) (EXPilot type) X and -.U. SA-4322-85-316-.U.-.+.-(**) (INPilot type) (**) Specify coil code on page 3.3, to complete number 2 Position — GENERAL SERVICE (NONHAZARDOUS SERVICE) SOLENOID-PILOT (with DIN type connector-spade terminal coil) G and -HC-U SA-4302-84-316-HC-U-.+.-(**) (EXPilot type) G and -HC-U SA-4322-84-316-HC-U-.+.-(**) (INPilot type) 3 Position (For 3 Position also refer to drawing at top of page) — GENERAL SERVICE (NONHAZARDOUS SERVICE) SOLENOID-PILOT SPRING CENTERING (with DIN type connector-spade terminal coil) X and -HC-U SA-4302-85-316-HC-U-.+.-(**) (EXPilot type) X and -HC-U SA-4322-85-316-HC-U-.+.-(**) (INPilot type) (**) Specify coil code on page 3.3, to complete number
Page 1 and 2: Series V-316 STAINLESS STEEL VALVES
Page 3 and 4: TECHNICAL DATA MATERIALS: Metal Par
Page 5 and 6: PRODUCT NUMBER COIL CODES: Complete
Page 7: PILOT ACTUATORS* DIMENSIONS SHOWN I
Page 11 and 12: SOLENOID-PILOT ACTUATORS — 24”
Page 13 and 14: SOLENOID-PILOT ACTUATORS — .75 19
Page 15 and 16: MANUAL ACTUATORS DIMENSIONS SHOWN I
Page 17 and 18: RETURN AND NON-ACTIVE DEVICES DIMEN
Page 19 and 20: *THREE-WAY (3 port-2 position & 3 p
Page 21 and 22: TWO-INLET or TWO-OUTLET FUNCTION (3
Page 23 and 24: FOUR-WAY (5 port-2 position & 5 por
Page 25 and 26: 316 STAINLESS STEEL ACCESSORIES Shu
Page 27 and 28: 316 STAINLESS STEEL ACCESSORIES Sta

Series V-316 - Versa Valves

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?