Automation Engine Reference Guide - Esko Help Center

Configuration Set
Automation Engine
Name of the selected configuration file. These configuration files represent specific behavior of the
output device.
Plate Size
The plate size of the above selected configuration file is shown.
Output File
Path: leave this empty to use the output path as defined in the Dispatcher (EskoLink queue – Output
tab). If your EskoLink queue has no value for the output place; then you can define output folders
here.
Name: leave this blank to get an output file name based on the input file. The output name of a
multipage file will look as follows: __. Non-multipage file will loose the
indication. Edit this to overrule this standard behavior. Only plain letters and numbers will be allowed.
Other, unsupported characters (symbols) will be replaced by an _.
Select a Resolution.
Anti-aliasing When ripping to Unscreened PostScript files the output tab offers the option to use Anti-
Aliasing. Anti-aliasing is relevant for the line-art objects in your design, that need pre-processing and
for which CTs are generated. Anti-Aliasing smoothens the staircase effect you get in the generated
CTs of line-art objects that need pre-processing.
455
6