PDF | 2.9 MB - Wacker Chemie

dISPERSIONS FOR ThE
PAINTS ANd COATINGS INdUSTRy
PROdUCT OvERvIEW
6
Dispersion properties
Specification data 1 Typical general characteristics
Grade Polymer base 2 Solids content3 Viscosity [CPS] Density [lbs/gal] Minimum film-forming
[%]
temperature (approx.) [°C]
VINNAPAS ® vinyl acetate-ethylene copolymer dispersions
EF8001 VAc-E 55 ± 1 150 - 6504 8.9 0
EF8300 VAc-E 55 ± 1 100 - 6504 8.9 0
410 VAc-E 50 ± 1 250 - 9005 8.9 0
VINNAPAS ® vinyl acetate-ethylene-vinyl chloride terpolymer dispersions
CEZ18 VAc-E-VC 50 ± 1 12,000 ± 3,0005 9.0 2
Main fields of application
Grade Polymer base
Architectural
2 Interior flat
Interior mid sheen Interior semigloss Interior high gloss
paints
paints
paints
paints
VINNAPAS ® vinyl acetate-ethylene copolymer dispersions
EF8001 VAc-E ● ● ● ● ●
EF8300 VAc-E ● ● ● ● ● ● ● ● ●
410 VAc-E ● ● ●
VINNAPAS ® vinyl acetate-ethylene-vinyl chloride terpolymer dispersions
CEZ18 VAc-E-VC ●
1 These figures are only intended as a guide and
should not be used in preparing specifications.
2 VAc = vinyl acetate
E = ethylene
VC = vinyl chloride
3 CENCO moisture balance
4 Brookfield LVF#3 at 60rpm
5 Brookfield RVF#2 at 20rpm
6 CD = cellulosic derivative
ST = surfactant
7 APEO-free = produced without the use of
APE surfactants
● ● ● highly recommended
● ● recommended
● suitable