Turbomachinery technology for gas expansion - Air Products and ...

Products to meet your applications
Standard and
custom machinery
Our focus is providing the right
solution for your application. We
offer both standard and customengineered
cryogenic and warm gas
centrifugal turbomachinery used for
refrigeration and power recovery in
diverse market segments. Depending
on your needs, we can customize
our equipment to meet your requirements
and applicable regulations.
Since we are both a manufacturer
and an operator, we understand your
applications and can provide a total
solution—no matter how small or
complex your needs may be.
This represents an overview of Air Products’
turbomachinery capabilities. If your needs fall
outside of these application ranges, please call
for additional information.
4
Market segments
Air Separation Natural Gas Other
• Gas plants • NGL processing plants • Helium
• Liquefiers • LNG peak shavers • Waste heat power generation
• Specialty cycles • Base load LNG • Hydrogen and CO
and applications
Typical design capabilities
• Ethylene • Specialty applications
Power 2 kW to 12 MW
(5 to 16,000 hp)
Speed Up to 100,000 rpm
Inlet pressure 1.5 to 98.5 kg/cm 2 g
(25 to 1,400 psig)
Temperature –268˚C to +260˚C
(–450˚F to +500˚F)
Outlet flow 56 to 15,300 am 3 /hr
(33 to 9,000 ACFM)
Impellers 50–550 mm
(2 to 22 inch)
Product operating range
Outlet flow (am 3 /hr)
20,000
2,000
200
Dissipative
Geared
20
1 30 600
12,000
Power (KW)
Compander