Monarch-mind-control

chapter_1
has charismatic programming, the alters will have porcelain face
programming. In this case each ribbon’s color will match the color of
the stones in the masks--that is yellow, white, blue, green, purple, red
and black.
The colors of the ribbons correlate or match the colors of the
Dollhouse rooms. What do ribbons do? The Ribbons serve the
programmers and the computers, who in turn serve the evil master
Spirits. Things that the Ribbons do for the computers have been
identified as follows:
a. The Ribbons eat from the system’s internal "Tree of Good
and Evil".,
b. Ribbon programming consists of several things--where
they reside, who they are and what they are to protect.,
c. Ribbons must protect the computers in order to protect
their own life. The Ribbons will be programmed to believe
that reversing the computer will reverse the Ribbons’ life.
The ribbons themselves operate with mechanical hearts (not
human hearts).
The cover stories may include the following: All Ribbons are hid
behind a little girl, who is a front for them & who tells the creation
story. The little girl will tell the creation story which included the
Ribbons. Behind her runs a silver cord. The silver cord has to do with
heart programming. The silver cord has 3 strands that cannot be
broken as per ECL 4:12. This silver cord goes off if the Ribbons are
touched. Ribbons are set up so that suicide programming is triggered if
they are cut.
Actually, french braiding conceals a 4th strand. In review as stated,
during the programming, a box with colored scarfs was shown the
child while severe electro-shock was given to the body. A colored
scarf represents a ribbon which runs a message from a colored room to
a similar colored alter.
http://mercury.spaceports.com/~persewen/fritz/fritz-ch11-1.html (15 of 32) [7/15/2000 8:09:34 PM]