DTL FontMaster Manual1.1 PDF

dtl ikarusmaster: file menu
1.9 Print 2. Square (shows the facesize for Kanji).
1.10 Display Numbers (shows the character number at the
set distance below the character).
1.11 Hexadecimal (Output of character number in hexadecimal;
decimal is the default setting).
2. Character List Window active
This function allows to set diuerent options for proofing of several or all
characters. Additional options compared to the printing of a single
character are:
2.1 Character spacing (distance between the sidebearings of two
characters).
2.2 Line Spacing (distance between the two lines of text).
2.3 Horizontal/vertical setting (option for Kanji setting).
130
A large range of print options are
available when the Character List
Window is active. The options
selected in the dialog above result in
the output shown on the ley.