SECTION B CONCEALED HINGES - Baer Supply Company
SECTION B CONCEALED HINGES - Baer Supply Company
SECTION B CONCEALED HINGES - Baer Supply Company
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SECTION</strong> B<br />
<strong>CONCEALED</strong> <strong>HINGES</strong><br />
170 DEGrEE SELf-CLOSING <strong>HINGES</strong><br />
Full Overlay<br />
• Lama hinges from Titus are manufactured in Europe and are economically priced<br />
• Lama hinges are ANSI/BIFMA tested and have a lifetime warranty<br />
• Lama “ST” version hinges have +5, -1.5mm or depth adjustment via manually loosening an<br />
affixing screw on the hinge arm<br />
• Lama “ST” series 170 degree hinges offers zero protrusion in the 90 and 165 degree opening<br />
angles when used with a 0mm plate<br />
• Lama 170 degree opening hinges have:<br />
- Cup depth of 12mm<br />
- Hinge cup edge drilling distance of 3mm to 5mm<br />
- 45mm boring patterns<br />
- Three cup fastening designs: screw-on, knock-in 8mm doweled and “Easy Fix” three<br />
quarter turn expanding dowel<br />
• See page B-47 for Lama hinge mounting plates<br />
packing: 50 hinges per box.<br />
Sold In: Both broken and full box quantities. Discount available for full box orders.<br />
St <strong>HINGES</strong> wItH mANuAL SCrEw DEptH ADjuStmENt<br />
Boring<br />
pattern<br />
Close type<br />
Screw-on Cup<br />
full Box Qty: 50<br />
Item#<br />
Dowel Cup<br />
full Box Qty: 50<br />
Item#<br />
Easy fix Cup<br />
full Box Qty: 50<br />
Item#<br />
fuLL OVErLAy <strong>HINGES</strong><br />
45mm Self-Closing TT248.0R14.050 TT248.0M73.050 TT248.0S17.050<br />
Screw-on Dowel & Easy fix<br />
for wooden Doors<br />
170 Degrees<br />
SPECIALITY APPLICATION<br />
HINgES<br />
Adjustments<br />
Side Adjustment<br />
+3/-1mm<br />
full Overlay<br />
B - 22 Würth <strong>Baer</strong> <strong>Supply</strong> <strong>Company</strong> • Over 40,000 products in-stock EVERYDAY!<br />
X<br />
Plate<br />
K<br />
D=plate<br />
X = Desired overlay in MM<br />
D = Height of base plate in MM<br />
K = Hinge cup drilling distance<br />
Height Adjustment<br />
+2/-2mm<br />
Depth Adjustment<br />
+1.5/-1.5mm
Change language