SECTION B CONCEALED HINGES - Baer Supply Company
SECTION B CONCEALED HINGES - Baer Supply Company
SECTION B CONCEALED HINGES - Baer Supply Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPECIALITY APPLICATION<br />
HINgES<br />
94 DEGrEE tHICK DOOr <strong>HINGES</strong> - up tO 1-1/2” tHICK<br />
40mm Hinge Cup - Full, Half Overlay & Inset<br />
• Salice Series F thick door hinges are the perfect solution for overlay pocket doors<br />
• Can be used for doors up to 1-1/2” (38mm) thick while maintaining minimal gaps between doors<br />
• Large overlays possible: up to 1 3/8” (34mm)<br />
• Exceeds ANSI/BHMA grade 2 standards and is ISO 9001 and ISO 14001 (Environmental) certified<br />
• Series F 94 degree opening thick door hinges have:<br />
- Cup depth of only 13mm<br />
- Hinge cup edge drilling distance of 3mm to 15mm<br />
- Patented parallel side-to-side adjustment of +5.5mm to -0.5mm via hinge arm screw<br />
• Available in “Screw-on” via two #6 x 5/8” screws cup fastening design (screws not included)<br />
• Available in self-closing and free swinging versions<br />
• Series F hinges are designed to work with all Salice mounting plates described on<br />
pages B-44 to B-46<br />
• Series F hinges are compatible with the Smove soft-close devices illustrated on<br />
pages B-50 to B-51<br />
packing: Full box quantity of 50.<br />
Sold in: Both broken and full box quantities.<br />
Discount available for full box orders.<br />
Boring<br />
Hinge type<br />
pattern<br />
fuLL OVErLAy <strong>HINGES</strong><br />
Screw-on Cup<br />
Item#<br />
52mm Self-Closing UBCFA7A99<br />
52mm Free Swinging UBCFA5A99<br />
HALf (3/8”) OVErLAy <strong>HINGES</strong><br />
52mm Self-Closing UBCFA7g99<br />
INSEt <strong>HINGES</strong><br />
52mm Self-Closing UBCFA7P99<br />
52mm Free Swinging UBCFA5P99<br />
fabrication Note:<br />
To achieve the tightest gap possible between two doors, when<br />
using any Salice “THICK DOOR” hinge, it is recommended to also<br />
utilize the largest edge drilling distance and thickest mounting<br />
plate combination for the desired overlay. Please refer to Salice<br />
technical catalog for details.<br />
full<br />
Overlay<br />
Half (3/8”)<br />
Overlay<br />
Inset<br />
<strong>SECTION</strong> B<br />
<strong>CONCEALED</strong> <strong>HINGES</strong><br />
full Overlay D = (19 + K) - H<br />
Half (3/8”)<br />
Overlay<br />
Inset D = (-3 + K) - H<br />
800-289-2237 • www.wurthbaersupply.com • Fax: 888-558-2237<br />
D = (8 + K) - H<br />
B - 23
Change language