Adhesives and Tapes
Adhesives and Tapes
Adhesives and Tapes
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
P roduct Information: 3M Fastbond Contact <strong>Adhesives</strong>, Water-Based<br />
Contact Adhessives, Water-Based<br />
Overlap Shear Peel<br />
Flash Strength Strength<br />
Solids Point (PSI) (PIW)<br />
Weight (Closed Color Application Bonding 75°F 180°F 75°F<br />
Product Description (Approx.) Cup) Consistency Dry Film Method Range (24°C) (82°C) (24°C)<br />
• Long bonding range with high 50% None Thin liquid Green, Spray, Up to 480 (1) 60 (1) 5.9 (2)<br />
immediate bond strength Clear roller, 4 hours<br />
30NF • Economical high coverage brush<br />
• Meets MIL-A-24179A, Type I<br />
• High viscosity version of 30NF 50% None Medium Green, Spray, Up to 480 (1) 60 (1) 5.9 (2)<br />
30H for roll coating liquid Clear roller, 4 hours<br />
brush,<br />
roll coat<br />
• Water-dispersed, activated 49% None Thin liquid Blue, Co-Spray Up to 350 (1) 50 (1) 4.1 (2)<br />
2000NF adhesive Light 2 hours<br />
• Immediate bonding <strong>and</strong> h<strong>and</strong>ling Orange,<br />
strength without forced drying Clear<br />
• One-part, fast setting with 47% None Very thin Lavender, Spray Up to NA NA 1.1 (2)<br />
100 neoprene base liquid Clear 20<br />
• Bonds many porous substrates minutes<br />
to porous or non-porous<br />
substrates<br />
P roduct Information: 3M Scotch-Grip Contact <strong>Adhesives</strong><br />
Contact <strong>Adhesives</strong><br />
Overlap Shear Peel<br />
Flash Strength Strength<br />
Solids Point (PSI) (PIW)<br />
Weight (Closed Color Application Bonding 75°F 180°F 75°F<br />
Product Description (Approx.) Cup) Consistency Dry Film Method Range (24°C) (82°C) (24°C)<br />
• Rapid strength buildup 19% -14°F Thin Green, Spray 30 482 (1) 65 (1) 19 (2)<br />
5 • Heat <strong>and</strong> creep resistant bond (-26°C) liquid Light minutes<br />
• Meets mil spec MMM-A-121 Yellow maximum<br />
• Similar performance to 5 22% -14°F Thin Light Brush, 30 482 (1) 65 (1) 19 (2)<br />
10 • Brushable with higher coverage (-26°C) liquid Yellow roller minutes<br />
• Meets mil spec MMM-A-121 maximum<br />
• Rapid buildup to a very 25% -14°F Thin Gray- Brush, 30 536 (1) 199 (1) 42 (2)<br />
high strength bond for metal (-26°C) liquid green, spray minutes<br />
1357 • Resists heat <strong>and</strong> continuous Light maximum<br />
load stress Yellow<br />
• Meets MIL-A-21366A, MMM-A-121<br />
• Lower solids, lower viscosity 18% -14°F Thin Gray- Spray 30 536 (1) 199 (1) 42 (2)<br />
1357L version of 1357 for automatic (-26°C) liquid green minutes<br />
spray maximum<br />
(1)Birch plywood to birch plywood @ 0.1 inches/minute separation rate.<br />
Relative Coverage<br />
4.0<br />
3.5<br />
3.0<br />
2.5<br />
2.0<br />
1.5<br />
1.0<br />
0.5<br />
0.0<br />
Water Chlor- Flaminated<br />
mable<br />
Solvents Solvents<br />
Carrier<br />
% Solids<br />
Density (lbs/gal)<br />
lbs. of adhesive/gal<br />
Relative coverage<br />
Note: The technical information <strong>and</strong> data on these pages should be considered representative or typical only<br />
<strong>and</strong> should not be used for specification purposes.<br />
(2)Canvas to cold rolled steel @ 2.0 inches/minute separation rate.<br />
Water Chlorinated Flammable<br />
Solvents Solvents<br />
50% 15% 20%<br />
9.1 10.8 6.7<br />
4.6 1.6 1.3<br />
3.4 1.2 1.0<br />
Issues Toxicity Flammability<br />
67<br />
Buy only the quantity you need – Depending on<br />
the specific adhesive, you can select tubes, quart<br />
or gallon jugs for convenient h<strong>and</strong>ling, or 5-gallon<br />
pails <strong>and</strong> 55-gallon drums for large bulk dispensing.<br />
27
Change language